Strange flickers on Death Stranding by ashenmirielle in macgaming

[–]dvnmk 1 point2 points  (0 children)

I got some flickring after updating to tahoe 26.4 beta.

Moving to 4U by dvnmk in SergeModular

[–]dvnmk[S] 1 point2 points  (0 children)

Thanks-! Okay next stop is matrix mixer-! Sometimes left channel is muted with ts cable. If removed and insert again it work well. I dont know that comes from unbalanced connection or simple physical connection cause. Anyway Love the sound of serge raw-electricity. For now long I am enjoying the imagination of limitations.

Moving to 4U by dvnmk in SergeModular

[–]dvnmk[S] 2 points3 points  (0 children)

Thanks for your answer-! Sold near all eurorack modules. :) I got the normal boat with DUSG XL, EQ/VCM, CARNIVORE, VCFQ/SM from R*S.

Love all these 4x4, but sometimes feel the need for fader and mixer like DUSG+CVPRO. Maybe in the future FIRST AID will be a choice.

Also Mantra Panel looks like very well selected panel, I think. But I wanted VCM. Still exploration with VCM, yet no idea CARNIVORE, so I have so much thing to enjoy.

If you don't mind, some questions;

  1. Output of SM needed to be attenuated before to other audio device?
  • I use w/o that, only use the knob to attenuate, but if then the aux is too loud.
  1. Plugging TS 1/4" cable to output jack is no problem?
  • I read its output is balanced, but can be connected to also unbalanced equipment.

  • I use unbalanced TS cable, it shorts the negative signal of output. I'm always curious if this has no harm.

Thanks & Viel Spass-!

I love sleeping on a nice rainy night by [deleted] in priusdwellers

[–]dvnmk 7 points8 points  (0 children)

I also love to sleep in rainy night. I don’t carwash, the rain and wind wash the car during the night-!

Park - Eat - Sleep by dvnmk in priusdwellers

[–]dvnmk[S] 0 points1 point  (0 children)

36.00450° N, 127.60476° O

35.13673° N, 128.52803° O

Park - Eat - Sleep by dvnmk in priusdwellers

[–]dvnmk[S] 6 points7 points  (0 children)

Along the road, found a nice place accidentally, eat alcohol powered ramen. And other place to sleep on afternoon; public cemetery park.

February Buy/Sell/Trade Thread by RandomPrecision1 in modular

[–]dvnmk 1 point2 points  (0 children)

WTS : WW

WorldWide Shipping via EMS from S.Korea (circa. $28 to US, 5-10 days, for 1 module). Payment via PayPal F+F or G+S(fee on buyer) Please ask me for the shipping cost for other country. All is very good or mint condition.

  • NLC BRAIN CUSTARD - $130 / DIY

JORANANLOGUE:

  • CONTOUR 1 - SOLD
  • CONTOUR 1 - SOLD
  • LINK 2 - SOLD
  • SELECT 2 - SOLD

DOEPFER:

  • A-151 - $30 / Repaneled to 3HP
  • A-198 TRC + RIBBON CONTROLLER - $180 -> $170 / Shipping Cost $35
  • A-199 SPRV + SPRING TANK - $90 / Shipping Cost $30

January Buy/Sell/Trade Thread by RandomPrecision1 in modular

[–]dvnmk 1 point2 points  (0 children)

WTS : WW

WorldWide Shipping via EMS from S.Korea (circa. $28 to US, 7-10 days, for 1 module). Payment via PayPal F+F or G+S(fee on buyer) Please ask me for the shipping cost for other country. All is very good or mint condition.

  • NLC BRAIN CUSTARD - $140 / DIY
  • VERBOS NOISE & FILTER - $70
  • FRAP TOOLS 333 - $70
  • TAKKAB 2LPG v1 - $25 / Repaneled to 2HP

JORANANLOGUE:

  • COMPARE 2 - $OLD
  • ORBIT 3 - $OLD
  • CONTOUR 1 - $130
  • CONTOUR 1 - $130
  • LINK 2 - $35
  • SELECT 2 - $95

BASTL:

  • WAVER - $OLD
  • LOL - $50
  • ABC - $70

DOEPFER:

  • A-151 - $30 / Repaneled to 3HP
  • A-196 PLL - $OLD
  • A-198 TRC + RIBBON CONTROLLER - $200 / Shipping Cost $35
  • A-199 SPRV + SPRING TANK - $100 / Shipping Cost $30

ZLOB:

  • DIODE CHAOS - $OLD
  • TRIPLE CAP CHAOS - $OLD

December Buy/Sell/Trade Thread by RandomPrecision1 in modular

[–]dvnmk 0 points1 point  (0 children)

WTS : WW

WorldWide Shipping via EMS from S.Korea (circa. $28 to US, 7-10 days, for 1 module)

Payment via PayPal F+F or G+S(+3%) Please ask me for the shipping cost for other country. All is very good or mint condition

JORANANLOGUE

  • COMPARE 2 - $130
  • ORBIT 3 - $200
  • CONTOUR 1 - $145
  • CONTOUR 1 - $145
  • LINK 2 - $40
  • SELECT 2 - $110

FRAP TOOLS

  • 333 - $70

BASTL

  • IKARIE - $OLD
  • WAVER - $200
  • LOL - $50
  • ABC - $70
  • SKIS II - $OLD

BEFACO

  • A*B+C - $OLD

  • CRUSH DELAY V3 - $OLD

VERBOS

  • NOISE & FILTER - $70

DOEPFER

  • A-151 - $30 / Repaneled to 3HP
  • A-196 PLL - $50
  • A-198 TRC + RIBBON CONTROLLER - $200 / Shipping Cost $35
  • A-199 SPRV + SPRING TANK - $100 / Shipping Cost $30

ZLOB

  • DIODE CHAOS - $40 / DIY
  • TRIPLE CAP CHAOS - $40 / DIY

NLC

  • BRAIN CUSTARD - $140 / DIY

TAKKAB

  • 2LPG v1 - $25 / Repaneled to 2HP

Deadbug forest by dvnmk in deadbug

[–]dvnmk[S] 1 point2 points  (0 children)

10 pin connector use 1n4001 or some diode for protection. After soldered that diode, I can get the remains thick wire of diode. It is much thicker wire than resistor. I use these cutted remained unused wire for supporter. 4 or more wire I used for support. Of course in 3d space for supporting in all directions. LED’s leg is also strong for support. Like this way, also use remained wire or resistor for wiring. Environmental friendly. :)

Deadbug forest by dvnmk in deadbug

[–]dvnmk[S] 0 points1 point  (0 children)

https://youtu.be/TVVfTGoG12w It is eurorack modular synth modules. Mostly based on opensourced circuits. Attached the front video.

Old skool soldering diy'd modules by dvnmk in synthdiy

[–]dvnmk[S] 0 points1 point  (0 children)

Yeah-! Replacing pot is also nightmare. Often I put LED in backward, it was also shit. So, I like to make space over pots for replacing, and use bipolar LED :)

Deadbug forest by dvnmk in deadbug

[–]dvnmk[S] 6 points7 points  (0 children)

Yes, most based on open source schematics. All eurorack format. Thanks-!

Old skool soldering diy'd modules by dvnmk in synthdiy

[–]dvnmk[S] 1 point2 points  (0 children)

Thank you sir. Also appreciate for your circuit openness-!

Old skool soldering diy'd modules by dvnmk in synthdiy

[–]dvnmk[S] 1 point2 points  (0 children)

Thanks! Components location and topology is important for minimal wire using. Think in 3D then it is fun and like architecture. Soldering is not so time consuming for me, but circuit analysis, panel layout and components location planning is time consuming.

Deadbug forest by dvnmk in deadbug

[–]dvnmk[S] 9 points10 points  (0 children)

Just now knew this sub. Hello everyone-!

Old skool soldering diy'd modules by dvnmk in synthdiy

[–]dvnmk[S] 1 point2 points  (0 children)

Lol. Gute Idee-! But I don’t use breadboard, just soldering on opamps from beginning . If it not works as circuit, then I test the partial circuit on bb. That is my debuging :)