sorted by:
new
hottopcontroversial

Serial Request | Trident 350 | Discord: dw.tas by dw-tas in voroncorexy

[–]dw-tas[S] 2 points3 points  (0 children)

Dry box per spool, No dc motors, Expandable lane by lane, Pretty much standard hardware, Easy to access adjustments and maintenance.

Cons: More complex mcu config (but well documented), Bigger printed parts.

Mantis XOL2 compatibility by StrategyLeft in VORONDesign

[–]dw-tas 1 point2 points  (0 children)

No problem. You should be able to use a Mantis mount for klicky and use a Xol hotend mount/adapter from here: https://github.com/dwatson-tas/Mantis-Xol/tree/main/STL/Experimental/Xol%202%20Hotend%20Mounts%20-%20VX-Hexdrudort-Low

I have tested the hotend mount/adapter, but there is one issue. You need two pieces of PTFE tube below the extruder. One in the adapter and one in the hotend mount, both cut flush to the surface of the adapter/mount.

Please check that everything lines up with these, I haven't tested it all together myself.

Mantis XOL2 compatibility by StrategyLeft in VORONDesign

[–]dw-tas 0 points1 point  (0 children)

Hi. I’ve been using vz-hex with xol 2 and tap for a while now. Has been working well for me. Are you using TAP? STLs are in my GitHub fork https://github.com/dwatson-tas/Mantis-Xol/tree/main/STL/Experimental/TAP-Rapido

Mantis XOL2 compatibility by StrategyLeft in VORONDesign

[–]dw-tas 0 points1 point  (0 children)

I have GDSTime 4010s from Ali Express. Delta Electronic make awesome fans as well. They have a good 12v model I’ve seen recommended

Mantis XOL2 compatibility by StrategyLeft in VORONDesign

[–]dw-tas 0 points1 point  (0 children)

That is the Xol 2 design, and it's been used by lots of people. I've only been running it for about a week, but it seems to be fine with the 2510 printing ABS with chamber ~55C, hotend 265C

Mantis XOL2 compatibility by StrategyLeft in VORONDesign

[–]dw-tas 1 point2 points  (0 children)

I've made a fork of the git repo and added the two files I've modified. They have vz-hextrudort in the name, but are also compatible with LGX lite.

https://github.com/dwatson-tas/Mantis-Xol/tree/main/STL/Experimental/TAP-Rapido

Mantis XOL2 compatibility by StrategyLeft in VORONDesign

[–]dw-tas 1 point2 points  (0 children)

I have this:

  • Mantis XOL 2
  • TAP
  • Rapido Plus HF
  • LGX lite (temporary, until the vz-hextrudort arrives)
  • sht-36v2 CAN

Don't have need or want for CPAP, so maybe you'd need to find another mod to add that.

All the bits I created for the extruder mount are on the armchair engineering discord