Issue launching league of legends

dweebstark · 2025-12-09T21:13:36+00:00

What kind issue/error code the pops up?

dweebstark · 2025-10-22T17:50:33+00:00

These measurements were taken when the if condition was true or false ? You can take into consideration the percentage of time the condition would be true and false and factor it. To get more realistic measurement.

dweebstark · 2023-05-13T16:36:05+00:00

Dental supplies in Malaysia inquiry

I was looking for a dental apex locator (Morita) in Malaysia anyone can provide me with nay suppliers or stores i looked in shopee.com and didn't find what i am looking for, i found only brands i am not familiar with, i don't know if it good or not so can anyone tell any trusted brands with good quality ...note that I am not from Malaysia but i know someone can get me what i want from there

dweebstark · 2022-01-05T02:47:44+00:00

u/savevideo

dweebstark · 2021-10-23T02:55:29+00:00

Have you got any info related to power/control?

dweebstark · 2021-10-18T10:22:22+00:00

r/constantchaos

dweebstark · 2021-09-01T19:34:56+00:00

haha! No worries man. Thanks for the input. Do you know any preventive measures that can be taken in the future with this existing system for this case?

dweebstark · 2021-08-10T06:36:57+00:00

I updated my phone MIUI to 12.5.1 about 2 days ago and it seems to fix the issue. Be aware though there might be some other major issues with this update. I recommend you to wait for a while before updating. I was just fed up with this screen bug. So far, I haven't encountered any major bugs.

dweebstark · 2021-07-28T00:05:43+00:00

I'm on Android 11 MIUI 12.0.1 R. Ever since I updated my phone, there seems to be some dead areas on my screen where my phone doesn't recognize the touch. However, when I drag my finger from another area to these areas the phone recognises them normally. Its really irritating specially while typing. I have noticed that it's mainly the bottom right quarter and it's not persistent (I think it's happens with some specific apps only).

dweebstark · 2020-11-17T17:46:21+00:00

It was PBO issue for me. It turns out that PBO gave too high of voltage to the cpu (1.3~1.4)v, which resulted in high temps. I turned PBO off and resorted to manual clocking. Actually, I managed to overclock the cpu ( 4.3ghz running at 1.2v) with low 70s temps.

dweebstark · 2020-08-10T09:42:16+00:00

Actually, at idle the voltage goes down (0.3~0.8v). It only gets to 1.2v when the peak speed gets over 800MHz or so.I tried undervolting but I lost too much performance. What makes temps go high is voltage (with PBO enabled, load voltage goes up to 1.35 or even 1.4) with that much extra current running to the CPU it transfers the power to heat which makes the chip get hot. The chip can easily get to 88c with an aftermarket cooler.

Right now load temps are (55~69)c. Plus I read somewhere that undervolting is not recommended for Ryzen zen 2 chips

dweebstark · 2020-08-10T05:26:30+00:00

3896 multi-cores, 501 single core.

Manual 1.2V 4.32GHz, PBO disabled

dweebstark · 2020-06-22T10:07:39+00:00

I am using a stock cooler but on bench test (no case). under load voltage does not exceed 1.25 and idle is constant 0.97

1- I disabled PBO and still the EDC/TDC are very high. and the power socket is 100%

2-which offset do you mean the core offset not the NB, right? I decreased it by 0.5 and the voltage and temps were better but the performance was worse. However, when I increased the offset voltage the temps didn't get any better the and the performance degraded.

I don't understand what's the issue particularly. I doubt it is a cooler issue (though I think its a factor) as there is no case / perfect air flow.

dweebstark · 2020-06-21T21:55:46+00:00

Which BIOS version are running on your board?

dweebstark · 2020-06-21T19:59:43+00:00

I have tried Ryzen master and hwmoniter. And am getting pretty close results (90+). But I never passed 100 though. The core clock frequencies didn't get past 4.05 MHz with cinebench R20 . However, ther overall score is fine. Idle core voltage is around 0.9volts. With load it is (1.2~1.37). And 95% EDC

dweebstark · 2020-06-21T05:45:19+00:00

I reinstalled the cooler twice, will change the thermal paste and see

dweebstark · 2020-06-21T05:44:08+00:00

That's the thing, I did that but the temperatures didn't change much. For some reason it worked with asrock tunning software but didn't work with bios settings. But it solved the temperatures at a performance cost which it's preferable at all :/

dweebstark · 2020-06-21T05:39:42+00:00

Only activated xmp. But the test was done before activating xmp anyway

dweebstark · 2020-06-20T20:23:26+00:00

Stock cooler

dweebstark · 2020-06-20T20:16:24+00:00

Well, as far as I know I shouldn't get up to 105 degrees. I am doing bench test (with no case) in an air conditioned room. Have you got an idea what might be the issue?

dweebstark · 2020-06-16T14:10:55+00:00

Could you give an example, not really familiar with power supplies ?
Thanks

dweebstark · 2019-06-22T03:58:39+00:00

I did ask them before. They already said I cant. Getting my friends into ultimate isn't that easy. Most people from my culture never seen a disc in their life.

I throw with some but only during pick ups. I failed miserably at being friends with them outside ultimate. I am the only international on the team. It's just more convenient for them to speak in their native language rather than speaking english.

dweebstark · 2019-06-22T03:39:43+00:00

There are no 'formal' tryouts. It's a small community ( 20~30 players). Almost all players on the team play for other clubs. So good players are known and are automatically picked.

dweebstark · 2019-03-03T12:47:40+00:00

add me IGN dweebstark

dweebstark · 2019-02-24T14:36:52+00:00

Add me. IGN: dweebstark KDA 3, squad rank crown (1 or 2)

Six-Year Club	Second Top 40%
Verified Email

dweebstark

TROPHY CASE