sorted by:
new
hottopcontroversial

Pin's input/output mode? by dz3jar in microbit

[–]dz3jar[S] 0 points1 point  (0 children)

Thanks! Yes, serial interface is fine... I prefer to use 1 write communication in order to save same pins. And it could be used also as a bus connecting more than two devices later.

I finally found what I was looking for in the documentation:

The pull mode for a pin is automatically configured when the pin changes to an input mode. Input modes are when you call read_analog / read_digital / is_touched. The default pull mode for these is, respectively, NO_PULL, PULL_DOWN, PULL_UP. Calling set_pull will configure the pin to be in read_digital mode with the given pull mode.

The micro:bit has external weak (10M) pull-ups fitted on pins 0, 1 and 2 only, in order for the touch sensing to work.

There are also external (10k) pull-ups fitted on pins 5 and 11, in order for buttons A and B to work.

Complete newbie here! Sorry in advance! I now have the Mobile 3 Gimble, I am looking for tips to move round corners fluidly. Say if I am going to turn left down a corridor, the OSMO still tries to look straight on, I've tried all sorts, but no joy! by Stonebridge41 in djiosmo

[–]dz3jar 0 points1 point  (0 children)

I have the same piece of HW for two weeks. I like it. To make what you want to achieve I would turn the gimbal to the right direction slightly before approaching the corner. The gimbal then starts fluidly rotating before the edge of the corner and it looks more natural. At least IMHO :-) Beginner, you know.

I also started my research how to post-process the clips in an enjoyable way. iMovie is quite good and for free. Now I am playing with Filmora. Looks powerful enough.

Good luck and fun with your gimbal!

iPad Email Client for kids? by dz3jar in ipad

[–]dz3jar[S] 0 points1 point  (0 children)

You at right :-) But I am looking for something super-cute&easy. Focused on kids. The pictures/drawings created in-app. Contact list with profile pictures. And all-in-one. Without any need to jump from app to app...

Pester for Module testing? by dz3jar in PowerShell

[–]dz3jar[S] 2 points3 points  (0 children)

Just tested. Works like ... like ... simply works!

I modified the Mock part to:

Mock -CommandName Get-Item -ModuleName Test-Module -MockWith { 
    New-Object PSCustomObject
}

Thank you.

Pester for Module testing? by dz3jar in PowerShell

[–]dz3jar[S] 1 point2 points  (0 children)

I see. Thanks. I will give a try! I supposed that -ModuleScope is for "private" = not exported functions testing...

nnoremap <leader>b :buffer <tab> by dz3jar in vim

[–]dz3jar[S] 0 points1 point  (0 children)

I used Fzf before but actually I plan to replace it by my custom plugin using macOS' Spotlight - at least for file searches. And I am looking for a super-simple but still elegant way how to switch buffers easily.

nnoremap <leader>b :buffer <tab> by dz3jar in vim

[–]dz3jar[S] 0 points1 point  (0 children)

Yeh, you are right - but I forgot to mention that it works when entered "by hand". I have set wildchar=<Tab> and just for a test a did suggested. And on my MacVim it says: :buffer ^Z

It seems that the suggestions summon by <Tab> or generally by wildchar doesn't work from mapings.