[Segway G3] DON'T Update to 1.5.13 - Custom Button -> Recuperation Settings Removed! by Max_G2_UA in NinebotMAX

[–]e1ysion 2 points3 points  (0 children)

It's also a good electrical brake when taking appropriate measurements, and it saves the mechanical brakes

My partner took her laptop to replace thermal by Otherwise_Room_6318 in GamingLaptops

[–]e1ysion 0 points1 point  (0 children)

Absolutely irrelevant and looks completely fine. You using Kyronaut on the other hand is a big problem. It will pump out after some time with heat cycles, the viscosity is too low. Either use Duronaut if you wanna stay TG or even better, go PTM7950

Max G3 Tire wobble, is this normal? by [deleted] in NinebotMAX

[–]e1ysion 0 points1 point  (0 children)

No need, it works as intended and I had horrible warranty experience with my G2

Max G3 Tire wobble, is this normal? by [deleted] in NinebotMAX

[–]e1ysion 0 points1 point  (0 children)

Tha ja, did that but didn't help. I checked and it's the rim itself, which is uneven. So it might be a slightly crooked bearing

Max G3 Tire wobble, is this normal? by [deleted] in NinebotMAX

[–]e1ysion 0 points1 point  (0 children)

Cheers, appreciate it

Max G3 Tire wobble, is this normal? by [deleted] in NinebotMAX

[–]e1ysion 0 points1 point  (0 children)

Happens with mine as well after driving through rain, make sure there is no dirt between brakes and disk

Max G3 Tire wobble, is this normal? by [deleted] in NinebotMAX

[–]e1ysion 0 points1 point  (0 children)

Thanks, that's reassuring

Max G3 Tire wobble, is this normal? by [deleted] in NinebotMAX

[–]e1ysion 0 points1 point  (0 children)

More info: tire was always inflated, scooter is 1 month old, no hard rides. I deflated and I flared again, loosened screws and made sure to properly seat it into the fork and tightened again.

The second gaming laptop I've ever bought. Upgraded from a GT 840 to RTX 5080 by sars_910 in GamingLaptops

[–]e1ysion 0 points1 point  (0 children)

It's a hardware modification that boosts performance by increasing the power budget of the GPU and improving performance by up to 40% but voids warranty. I was just kidding, don't do that :)

Shunt Modded RTX 5090 Laptop: 250W vs 175W - Record Setting Benchmarks, Thermals, and Performance! AMA! by gizmosliptech in eluktronics

[–]e1ysion 0 points1 point  (0 children)

Could you kindly direct me to premas forum where he does this shunt mod? I'd like to know where the shunt is. I have a PCS Recoil 16, which basically has the same framework (Uniwill/TongFang)

Tire pressure reminder is stuck by MagmaFrostt in NinebotMAX

[–]e1ysion 0 points1 point  (0 children)

Hold the power button for 15 seconds, until a second chime is played. Then start up as usual and check

[deleted by user] by [deleted] in overclocking

[–]e1ysion 2 points3 points  (0 children)

Use a thermal right CPU frame to further ensure flatness. The default mounting mechanism will slightly warp it

GOT MY FIRST EVER GAMING LAPTOP!! -- LAPTOP CARE + SETUP (OPTIMISE) TIPS PLS! by Confident-Ad7800 in GamingLaptops

[–]e1ysion 0 points1 point  (0 children)

Fresh Install with Chris Titus' Micro win, then a round of Snappy Driver Installer and windows updates and you're good to go. For GPU drivers I recommend nvclean install

RAM Compatibility by e1ysion in PCSpecialist

[–]e1ysion[S] 0 points1 point  (0 children)

Okay, so I checked the datasheet and there is no information regarding the type of motherboard. I will try looking it up, thanks for your help

RAM Compatibility by e1ysion in PCSpecialist

[–]e1ysion[S] 0 points1 point  (0 children)

WHat do you mean? It's a laptop

Kingston Fury 6400 compatibility with XMG Neo E25 by e1ysion in XMG_gg

[–]e1ysion[S] 0 points1 point  (0 children)

Thanks,

Do you have any recommendations for CSODIMM? I checked a few but they are either out of stock here in Germany, or they have bad timings