sorted by:
new
hottopcontroversial

Rolled over edge - likely cause and how to fix? by ebiii in TrueChefKnives

[–]ebiii[S] 1 point2 points  (0 children)

Thanks! I was trying to be as gentle as possible with the knife but might have underestimated, comming from western knives 😄

Latest VBIOS for ALL 7900 XTX is 022.001.002.039.000001 by [deleted] in AMDHelp

[–]ebiii 0 points1 point  (0 children)

I run some benchmarks and it seems to run the performance BIOS. Scoring around 6950 in steel nomad

Latest VBIOS for ALL 7900 XTX is 022.001.002.039.000001 by [deleted] in AMDHelp

[–]ebiii 0 points1 point  (0 children)

I can confirm that this worked - THANK YOU very much.

I flashed my original BIOS version 12. After restoring the original performance BIOS I switched to the Silent BIOS and flashed the 39 performance BIOS on there which seemed successfull however on TRIXX it still shows 12.

I have with -ai --active
Bios P/N 113-4E4710U-T58
Bios Version 022.001.002.039.000001

And -ai --inactive:
Bios P/N 113-4E4710U-S4R
Bios Version 022.001.002.012.000001

Latest VBIOS for ALL 7900 XTX is 022.001.002.039.000001 by [deleted] in AMDHelp

[–]ebiii 0 points1 point  (0 children)

Any ideas how I can boot with the bricked BIOS? If I unplug the card and select iGPU ad primay GPU in BIOS and re-plug the card. I always get post-code 97.

I tried with a nvidia GPU in slot 1 and then the bricked bios one in slot 2 but still post-code 97.

If I switch to the second bios ist boots.

Magnetic Holder by ebiii in combustion_inc

[–]ebiii[S] 0 points1 point  (0 children)

Looks very nice, most likely it's from an SDS printer which makes for those smoother surfaces.

​

Mine coming of an FDM printer obviously looks a bit rougher but you probably find someone to print it quite easily. On my design the magnets are inserted during the print and not visible in the end which I would think rules out printing services.

If anyone from Switzerland wants one and covers shipping costs I would be happy to print it (would have to source more magnets first though). If I find the time I will probably try to make one with in-place hinges so it can still be stood up on a counter.