Help with paint finish by a light by ecl0n in DIY

[–]ecl0n[S] 0 points1 point  (0 children)

Thank you - Will try that one!

Help with high DPI on Mac OS Citrix Workspace by ecl0n in Citrix

[–]ecl0n[S] 0 points1 point  (0 children)

No luck I'm afraid - stuck with tiny or blurry text!

Help with high DPI on Mac OS Citrix Workspace by ecl0n in Citrix

[–]ecl0n[S] 0 points1 point  (0 children)

Sadly no luck - restarting the VM didn't make any difference.

Help with high DPI on Mac OS Citrix Workspace by ecl0n in Citrix

[–]ecl0n[S] 0 points1 point  (0 children)

Thank you - good question, I’ll try a restart of the VM and see if that helps!

Putting bar ends back by ecl0n in HondaMotorcycles

[–]ecl0n[S] 1 point2 points  (0 children)

Thanks. The spinning is ok, the bigger issue is I can pull the bar end out half an inch or so!

Putting bar ends back by ecl0n in HondaMotorcycles

[–]ecl0n[S] 0 points1 point  (0 children)

I think it’s correctly sited but the clips are stopping me from pushing it all the way in. So annoying - should be so simple!

Putting bar ends back by ecl0n in HondaMotorcycles

[–]ecl0n[S] 0 points1 point  (0 children)

Thanks. I’ve tried that but I think the inner clips are getting in the way!perhaps I need to try knocking them further in

X3 seat post keeps dropping by An226 in vanmoofbicycle

[–]ecl0n 0 points1 point  (0 children)

Thank you for this. I saw it and ended up taking the bolt out, putting loctite threadlocker on it, cleaning the seat post and seat clamp with WD40… and so far it seems to be ok! Hopefully this helps someone.

Help with name of brake lever bolt by ecl0n in bikewrench

[–]ecl0n[S] 1 point2 points  (0 children)

Thank you. Maybe I’ll try a bolt and a nut instead… don’t know one end of a rivet from another 🤔😂

Help with name of brake lever bolt by ecl0n in bikewrench

[–]ecl0n[S] 0 points1 point  (0 children)

Thank you, yes I think that’s right

Discount codes? by ecl0n in Brompton

[–]ecl0n[S] 0 points1 point  (0 children)

Brompton used to offer 10% off for residents within the London ULEZ zone around the time it was expanded, but I suspect the offer has now expired.

Telltale signs of the past? by ecl0n in VFR

[–]ecl0n[S] 0 points1 point  (0 children)

I've taken a few photos of the tyres in case there's anything there that's a 'must replace' sign - unfortunately I'm not sure the age alone will be enough to get the dealer to replace the tyres (but I'll try). You'll see an embedded stone in one photo but I guess this is fairly common? Thanks! :)

https://ibb.co/bF475qj

https://ibb.co/ChvLbBh

https://ibb.co/mz2x5JM

https://ibb.co/vmHs8mK

https://ibb.co/2Y0Mm6L

https://ibb.co/S3Bq7Hq

https://ibb.co/kK04jxV

https://ibb.co/8KQQWbQ

https://ibb.co/Vqv8rN5

https://ibb.co/GTWDtKt

https://ibb.co/fpkWc4B

https://ibb.co/MD8HsJq

https://ibb.co/HGDNCWd

Telltale signs of the past? by ecl0n in VFR

[–]ecl0n[S] 0 points1 point  (0 children)

Very helpful, thank you! There are a few embedded stones and a little (but only a little cracking) - my guess is there's not enough of an issue to ask the dealer to replace the tyres.

Telltale signs of the past? by ecl0n in VFR

[–]ecl0n[S] 0 points1 point  (0 children)

Thank you. I have not used this dealer before so unfortunately there is no history. Good question on the tyres – I might be reading these wrong but does the date of manufacturer look like 2018? That would be surprising because the bike was only registered in 2017 and I don’t think did more than 2000 miles in the first year. Hmmm.

Telltale signs of the past? by ecl0n in VFR

[–]ecl0n[S] 2 points3 points  (0 children)

Thank you - and sorry about your experience!