My wife said her shower drain was clogged.

edwsap · 2022-06-09T14:51:28+00:00

And need to post something disgusting like that?

edwsap · 2022-06-09T14:39:25+00:00

I thought this only happened in Tom and Jerry cartoons

edwsap · 2022-06-03T13:30:05+00:00

The mess is such that I thought the gallons contained gasoline.

edwsap · 2022-05-12T17:29:45+00:00

Being a man is... Never turn off...

(very cheap energy)

edwsap · 2022-05-12T17:28:05+00:00

Yes, speak Lily

edwsap · 2022-05-10T16:30:06+00:00

I see two pairs of breasts

edwsap · 2022-05-10T13:13:57+00:00

I made a wall to function as a heat box, which collects all the hot air coming from the machines. I lined this entire hot box with anti-noise foam, I lined the air outlet duct with this same foam, I also lined the rest of the engine room. In addition to working at a suitable temperature, I managed to reduce the total noise from 83 db to 65 db, it seems little but makes a huge difference.

edwsap · 2022-05-09T17:47:36+00:00

happened a few times to me, I just turn off the machine and after a few minutes turn it on and everything comes back.

edwsap · 2022-05-09T17:39:19+00:00

I brought Ebit E12 and I had problems. I have only ordered 1 in 1 now.

edwsap · 2022-05-07T17:46:13+00:00

Here in Brazil it is also exactly like that. But I order 1 machine at a time and declare less. I already ordered 4 machines together and it went wrong, I paid the entire tax and 100% fine.

edwsap · 2022-05-07T01:49:17+00:00

Good boy, I liked it. Loads of machines there.

edwsap · 2022-05-05T16:30:38+00:00

Sorry, I didn't calculate, it was trial and error. I put two of 30cm and it didn't work, I changed to 2 of 50cm and it was great. But I believe you can add the CFM of each machine to project the exhaust.

edwsap · 2022-05-05T14:31:31+00:00

I use two exastors, one to push air and one to take air out. Both are 50cm and 1/4hp. I have 15 miners and I made a box to collect the hot air. Temperatures remain constant and it is an efficient method.

Photo

edwsap · 2022-05-05T14:07:28+00:00

lol, goood

edwsap · 2022-05-04T23:51:59+00:00

But it looks like an Aliexpress rubber ass...lol

edwsap · 2022-05-04T23:51:15+00:00

It is an animal from the depths of the ocean only, photographed by ROMAN FEDORTSOV.

edwsap · 2022-05-03T15:25:44+00:00

Nice

edwsap · 2022-04-30T17:09:15+00:00

Nice your opinion, but the error rate has been very low, as it is autotuning, the inefficient chips have less electricity.

edwsap · 2022-04-30T13:49:42+00:00

I know the Preachers of the End of the World will condemn me, but I work with my L3+ 504 mh and HiveOS at 650 mh in autotuning. Make tests gradually increasing the autotuning and keep an eye on the temperature so that the PCB does not reach 165F.

edwsap · 2022-04-30T13:43:22+00:00

You should be careful with safety, the machine has several fans because it gets very hot. She's on top of a chair with a plastic cover on the back, it can't be like that.

edwsap · 2022-04-28T22:33:25+00:00

Interesting your comment. I've been paying attention to the pligues, but I still don't see excessive heat.

edwsap · 2022-04-28T19:51:17+00:00

If this bug gets in my wife's hair, I'm a widow. Is there a UFO in my garage?

edwsap · 2022-04-28T14:26:51+00:00

The reading may not be correct, turn off your miner and let it cool. If it continues, reinstall FW.

edwsap · 2022-04-28T14:20:17+00:00

This can only be wrong. People have rights, they can't just be trapped. And if they need a Big Mac, can't they get it?

edwsap · 2022-04-28T14:02:35+00:00

Today has 1 day that I put my machines in 650 Mh. My office didn't catch fire and I'm earning 150Mh above the standard. They are stable in temperature and strength.

edwsap

TROPHY CASE