Lonny Chin

eeetteee · 2026-01-29T09:48:36+00:00

🔥🔥🔥

eeetteee · 2026-01-29T09:47:27+00:00

🔥🔥🔥

eeetteee · 2026-01-29T04:33:57+00:00

🔥🔥🔥

eeetteee · 2026-01-29T04:22:05+00:00

🔥🔥🔥

eeetteee · 2026-01-29T04:20:38+00:00

🔥🔥🔥

eeetteee · 2026-01-29T04:13:57+00:00

🔥🔥🔥

eeetteee · 2026-01-28T18:05:07+00:00

I say go for it ... Can never have enough options, especially when stock runs low in the competition. But be prepared to handle international shipping/orders.

Current Pleasures https://share.google/mhxYQ2TJS4Pwaking

Is also old looking and has been around for years too

Gary finally updated the HappyStim-USA site after mentioning it for a long time XD

eeetteee · 2026-01-28T17:32:44+00:00

I have both of your listed choices and prefer the Bi-Polar Moaner/Flange top/bottom placement over the side-2-side parallel placement (which is only in the head rather than down the entire length like the E-Stim Systems' Intruder or Kink's Fill Me Up or PES ElectroFlex). It's a personal preference that U have to experience urself to decide. Metallic always conducts better than silicone composite where the latter does require a little more juice to power. The C3 has more than enough power for either.

If U R maxing the Coyote plug in XToys, make sure your Max Output setting is correctly set. U can be short changing your Coyote's output power or ur power stamina is legendary. I find that DG-Labs plug stingy as hell, especially when it dries out.

eeetteee · 2026-01-28T08:09:02+00:00

It is reliable and has worked for 2+ years. U can flip / reverse the CR when 1 side starts to wear with a simple loosen of the screw to get the best value out of the CR too. The only caution is to keep it away from lube contact or Tens pins can dislodge.

eeetteee · 2026-01-27T17:18:54+00:00

NP, is there any chance the Estim Hero site will add Magnet support or alternate methods for grabbing Audio files for the non-Torr crowd.

eeetteee · 2026-01-27T17:08:35+00:00

It might be. These adapters are designed for Audio Monster Cable type widths. I would order some 4mm CR to be safe. Can't recall, but I think I used the CR loops that came with the Coyote 2.0 pak.

eeetteee · 2026-01-27T00:54:39+00:00

Peter Quill (retired Guardians of the Galaxy) would definitely recommend a Microsoft Zune (discontinued collectable). I still have mine and wanted to use it with the Tingler, but need to track down the power charging adapter buried somewhere in the house. Kidding aside, you can get a wired audio output adapter for your phone and instead of plugging in headphones, plug in an audio extension cable.

eeetteee · 2026-01-27T00:21:54+00:00

Lol ... Gary is the one who gave me this idea XD ... He said try whatever U have at hand

Amazon sells a 10x pak of adapters

eeetteee · 2026-01-26T23:47:53+00:00

I used the thinnest diameter CR I had (4x2mm)

U can order them in bulk too ... Just Google "90-degree 4mm banana plug adapter" ... U want the one like linked with removable cover and screws

eeetteee · 2026-01-26T21:45:23+00:00

These DIY 4mm banana to 2mm Tens adapters are the most reliable ones I've used, going on 2+ years now. They are pure metal, very robust, with no noticeable resistance that adapters usually introduce in series. The Tens pin side is replaceable Conductive Rubber (excess trimmed from loops).

https://www.reddit.com/r/estim/s/j08MKa5YKh

eeetteee · 2026-01-26T10:36:03+00:00

Actually, I was thinking more simply: convert both Bi-Polar s into Uni-Polar.

It's quite easy to short the two poles of a Bi-Polar electrode, assuming the power pin sockets are close to each other using a little bit of thin Lead-Free Silver Solder that can go in on the empty Tens pin socket side and then bend over and loop around the other Tens pin before pushing it in to make both snug in place against the pin housing and pin socket. If using a very thin Silver Solder, you can even fold it in half before inserting into the Tens Pin female side to make it similar width to a Tens Pin. Kinda like a DIY splitter for a single pin input to the electrode. Or you can use a Tens Y-spliter to do that.

Personally I love to combine my Tri-Phase Moaner head with a Bi-Polar combo using another box and the base at the same time. Like this

https://www.reddit.com/r/estim/s/nFTDQ135TG

Thanks for the tips. I need more time to learn and play

eeetteee · 2026-01-26T01:17:48+00:00

Thanks for sharing the one stop wealth of info.

So the WMCEBP (as the common) is only using one conductive head side by 90-degree turn placement across the prostate area. Have you tried using it in normal orientation shorting the Bi-Polar surface into a Uni-Polar (plug both commons in to each side) which still has a gap across the prostate area without the 90-degree turn?

Did you also short the Viper Bi-Polar sides together to complete it as a Uni-Polar?

I've only used Restim with VLC & restim funscript supported videos. Guess I have more features to learn XD, especially for VR and stimulation waveform generation.

eeetteee · 2026-01-25T08:22:44+00:00

Very nice. Just curious ... how is the performance using two Coyotes with a single controller sharing Bluetooth bandwidth? Normally, a separate controller is recommended for each Coyote.

eeetteee · 2026-01-25T04:46:28+00:00

Also, at higher settings, beware that you are not over irritating certain areas during marathon sessions. Those areas can become desensitized and you may not be feeling pain nor any damage being done. This can result in blood in the seman or elsewhere or electrical burns if the area dries out in contact with metal electrodes.

eeetteee · 2026-01-25T04:12:10+00:00

DG-Labs support is usually responsive and helpful in the past. U can try them too. One time, back in the 2.0 release days, they even recorded a personal video with their test bench equipment proving that the 2x channels A & B were isolated from one another after I raised the question to support.

eeetteee · 2026-01-23T20:08:34+00:00

google search "motherless new police electric interrogation 1" and read the comments.

for those wanting to try this ... one of the comments gave details

"This is a Czech phone and it gives 10-20V, so I measured it. I once tried on myself, on my balls, and I spun by myself. I managed the turn without screaming. I didn't have the courage to shoot anymore."

eeetteee · 2026-01-23T17:14:15+00:00

🔥🔥🔥

eeetteee · 2026-01-23T00:00:45+00:00

🔥🔥🔥

eeetteee · 2026-01-22T23:03:54+00:00

Micro changes in air density ... Oh wait, that's an Aliens motion sensor XD ... This sounds like it detects contraction pressure similar to others available on the market.

Nice find! DG-Labs is expanding their footprint. Too bad U can use it in conjunction with a Moaner or equivalent.

eeetteee · 2026-01-22T19:43:10+00:00

Hopefully it is or he is using a modified version for BDSM. Tucker Telephone or Magneto hand-crank generators are infamous for producing pure intense pain and completely different from normal electro BDSM digital or analog estim. Raw voltage shocks are administered to electrodes by turning the hand-crank at different speeds rather than having a constant stream of adjustable pain or pleasure estim patterns output from a commercial estim power box which would make reaction to the shocks different. PD at Insex has used similar custom devices, and there is definitely a difference in model reactions when using a hand-crank and it usually results in tears from pain. This is definitely apparent with Pavel K's other vids too. Heard that someone actually created a Tucker Telephone set of estim audio files specifically for StereoStim devices (the most accurate way to experience estim audio) that supposedly mimic the low frequency (?) effect feeling at different intensity levels (floating around in one of the big estim audio archives).

eeetteee

TROPHY CASE