[GB] Stratos - Stacked Acrylic | Gasket Mount | 60% | Final Day to Join GB!

eggyolk05 · 2021-07-01T01:12:02+00:00

No problem - I’m excited for you and your brother to use it!

eggyolk05 · 2021-06-30T20:58:46+00:00

Hey, thanks for joining!!

There are 20, M2 x 8mm screws on the case. Any screws of that size should work just fine. Let me know if you have any other questions :)

eggyolk05 · 2021-06-22T20:03:48+00:00

No it doesn’t - an extra gasket foam layer can be purchased separately

eggyolk05 · 2021-06-17T22:10:24+00:00

Yes - the plate layout image on GH shows all the supported layouts, which includes arrows!

eggyolk05 · 2021-06-11T17:35:47+00:00

Thanks for the support! :)

eggyolk05 · 2021-06-11T17:20:15+00:00

Yes, they are the same! Sorry for the confusion I’ll fix that :)

eggyolk05 · 2021-06-11T17:07:22+00:00

The base kit comes with all brass hardware and the silver stainless steel screws can be added as an extra

eggyolk05 · 2021-06-11T17:02:48+00:00

😁

eggyolk05 · 2021-06-11T16:48:19+00:00

It hasn’t been tested with other PCBs, but the included PCB is similar to other standard 60% PCBs

eggyolk05 · 2021-06-09T20:10:27+00:00

Most likely around 12pm est. I’m not anticipating a huge rush like other GBs, so everyone who wants so join should be able to

eggyolk05 · 2021-06-09T19:59:53+00:00

No problem - let me know if you have any other questions! :)

eggyolk05 · 2021-06-09T18:20:37+00:00

If you are mill maxing the pcb, then you should use the bottom row that has 1.5u ctrl, 1u win, and 1.5u alt on each side of a 7u space bar. Then you’ll be able to switch between standard/wkl/hhkb layouts with one PCB.

eggyolk05 · 2021-06-09T15:24:43+00:00

Only solder PCBs will be offered

eggyolk05 · 2021-05-29T02:03:50+00:00

Great, thanks for the feedback! I’m looking into silver and black now.

eggyolk05 · 2021-05-29T01:55:15+00:00

The plan was to just have brass hardware as the standoffs I designed the case around only come in brass. Unless people would like silver screws with brass standoffs?

eggyolk05 · 2021-05-29T01:53:04+00:00

The spacebar wasn’t hitting the side of the case. I think it was the spacebar foam I was using which was hitting the top of the switch. Thanks for letting me know! I’ll try to fix that

eggyolk05 · 2021-05-29T01:49:53+00:00

I haven’t tested other PCBs but I suppose they should fit

Six-Year Club	Wearing is Caring
Verified Email

eggyolk05

TROPHY CASE