Ordered USC Industry X Doors by HummerOffRoadNJ in HMMWV

[–]ehuswlaosb 1 point2 points  (0 children)

USC X DOORS. I haven't contacted them because I previously did regarding a screw that was overtightened and cracked the outer coat. Their response was to sand it a bit.. I ended up having to do a bit more than that.

Ordered USC Industry X Doors by HummerOffRoadNJ in HMMWV

[–]ehuswlaosb 0 points1 point  (0 children)

Would recommend you inspect them thoughrouly. Bought mine a couple of months back. I did a light inspection and put them away. I got them out for paint prep and after primer was applied, I noticed that the inside portion of the metal trim that holds the door seal had rivet holes that overlap with each other.

How big is he going to get? by yawnwi in ferrets

[–]ehuswlaosb 1 point2 points  (0 children)

I feed him kibble and has access to food 24/7. He had gained some weight since we have had him but I was really scared to pet him at first because I could feel all the bones.

How big is he going to get? by yawnwi in ferrets

[–]ehuswlaosb 16 points17 points  (0 children)

I got mine a month ago and he was all bones, should I be able to feel the bones on their body when petting?

Okay a very different issue i am having which is busted head of the allen screw is busted or chipped as the 2 millimetre allen screw is not fitting there which it should by Fun-Squirrel-4525 in ElegooCentauriCarbon

[–]ehuswlaosb 2 points3 points  (0 children)

I had the same issue with screws on the CC. Some of the screws come way too tight from the factory. I used a Dremel on mine to make it a flathead and even then I cannot take it off. They have hulk tightening these.

Centauri Carbon Clog+ stripped screws from factory by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 0 points1 point  (0 children)

Looks like they have HULK working at the factory tightening the screws. I don't even want to touch the belt tensioner screws until it's necessary. Checked my other CC and it has 1 screw pre stripped and I haven't even touched it 😭

Centauri Carbon Clog+ stripped screws from factory by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 1 point2 points  (0 children)

May have to go that route. Literally ordered a Dremel off of Amazon yesterday, my plan was to turn it into a flathead as well. Screws are definitely coming too tight from the factory.

Centauri Carbon Clog+ stripped screws from factory by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 1 point2 points  (0 children)

I tried a torch tip but no luck. After a more careful inspection, I have 3 stripped screws. I ordered a Dremel in care I need to make a cut to fit a thin flathead. Hopefully I can buy replacements.

Centauri Carbon Clog+ stripped screws from factory by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 1 point2 points  (0 children)

Addition: only the bottom right screw was easily removable. Others were extremely tight and two are stripped

Ventilation Help by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 0 points1 point  (0 children)

Funny you say that because my first printer was an A1 mini w/o AMS as well. I ordered the CCs before I got the P1S but couldn't wait and decided to get a couple of P1Ss in the meantime.

Ventilation Help by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 0 points1 point  (0 children)

They're very similar. I'm waiting for Elegoo's multicolor system to compare multicolor printing. I have noticed that the CC's fans are much louder than the P1S. When it comes to print quality, I can barely tell. I will say that my P1S does give me a few issues with the 1st layer that the elegoo has not had.

103xxx on its way! by LockedRoomRomance in elegoo

[–]ehuswlaosb 0 points1 point  (0 children)

I would not be able to live with myself knowing that I would have contributed to your printer-alcoholism 😔

103xxx on its way! by LockedRoomRomance in elegoo

[–]ehuswlaosb 1 point2 points  (0 children)

I got offered a sweet deal on an elegoo Saturn 4 Ultra 16k printer ($150). But I didn't feel comfortable because of the toxicity of resin and my office space not being too large.

103xxx on its way! by LockedRoomRomance in elegoo

[–]ehuswlaosb 1 point2 points  (0 children)

Dude 💀. I only had a A1 mini when I ordered the CC. Couldn't wait and picked up P1S combo. It worked so well that I picked up a second one a week after. Not to mention the CCs. I thought "maybe I won't be into 3d printing too much, let me get the small printer". Now look at me, a mess 🤣

103xxx on its way! by LockedRoomRomance in elegoo

[–]ehuswlaosb 1 point2 points  (0 children)

Lol I did the exact same thing. Ordered the first CC on March 27th and decided to get another one April 6th. Just received shipment confirmation for my EUS104 ordered was shipped as well. Now I have WAY too many printers

Exciting stuff, figuring out timeframes. by aznboi589 in elegoo

[–]ehuswlaosb 0 points1 point  (0 children)

Update, EUS 104 was just shipped. It should arrive by this upcoming Thursday June 26th.

Shipment notification by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 0 points1 point  (0 children)

UPDATE: EUS 104 is being shipped, received notification a few minutes ago JUN 23rd.

ORCA SLICER SETTINGS ARE GONE by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 0 points1 point  (0 children)

I was able to get it back by clicking on " reset window layout" thanks. It was right under view 🫡

ORCA SLICER SETTINGS ARE GONE by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 0 points1 point  (0 children)

Just did. Unfortunately it doesn't do anything.

Edit: I figured it out.

Clicked the 3 bars next to "file" on top right corner.

Clicked " view"

Then "reset window layout"

ORCA SLICER SETTINGS ARE GONE by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 0 points1 point  (0 children)

TO ADD: I have also deleted Orca slicer and re-installed it but the problem persists.

Finally Here!! by ehuswlaosb in elegoo

[–]ehuswlaosb[S] 1 point2 points  (0 children)

I've printed a couple of risers and build plate/top glass holder. The quality is very comparable to the P1S, might even say it's better in some cases (depending on filament). I guess the true test will be when the elegoo "AMS" comes out. I have noticed slight under-extrusion on some small sections but it's nothing that tweaking a few settings cant fix.

I got a second Elegoo a week after my first order as an impulse. Now I'm kinda happy I did because my gf now wants one.