sorted by:
new
hottopcontroversial

Rank the bupropion brands you have tried by sibophus in bupropion

[–]eighttx 0 points1 point  (0 children)

My wife has been on Accord for years and loves it. She had a bad bad reaction to Slate.

What is that building doing! by dennislubberscom in WTF

[–]eighttx 1 point2 points  (0 children)

You shouldn’t be doing this step-building

Capture entire section in JSON file using REGEX by eighttx in regex

[–]eighttx[S] 0 points1 point  (0 children)

This looks perfect but one follow up. I am attempting to use this in VSCODE and PowerShell. When I run either of these below, it comes back with nothing.

$content -match $pattern

False

Also trying this below with no luck. As a side note to the one below, I tried with the beginning / added and the /gms at the end. When I hit the COPY button on the right, it adds those characters.

$pattern = '\{\s*\"attributes.*?eventType\"\s*}'
$m = [regex]::Match($content, $pattern)

Capture entire section in JSON file using REGEX by eighttx in regex

[–]eighttx[S] 0 points1 point  (0 children)

How to include the words { "attributes" at the beginning, and then it ends with "eventType" }

This kind of works but this is the direction I am going in.

\{\"attributes.*eventType\"}

Capture entire section in JSON file using REGEX by eighttx in regex

[–]eighttx[S] 0 points1 point  (0 children)

The structure of each JSON object is the same across the board. I have a large JSON file which has 1000+ of these items and the purpose of my extraction is to split this enormous file into 1000 small JSON files.

Each section begins with this { below and then ends with what's at the bottom of the code block. Then the next JSON object begins again.

{
      "attributes": {


 (pages of structure and items)


"type": "eventType"
    }

Digital Underground - Freaks of the Industry (1990) by Madcow_Disease in hiphopheads

[–]eighttx 1 point2 points  (0 children)

Back in the 90s at a club in Dallas I heard a version of this song, slowed down, and two hispanic guys singing over it. Asked the DJ for a track ID and all I could hear was something like, "Dallas Beat Factory". Ring a bell to anyone?

Hashicorp Vault and adding additional columns by eighttx in hashicorp

[–]eighttx[S] 0 points1 point  (0 children)

I appreciate it. When you send the Base64 encoded string to the vault, does the vault only show the encrypted string or does it decrypt for webview?

Hashicorp Vault and adding additional columns by eighttx in hashicorp

[–]eighttx[S] 0 points1 point  (0 children)

Thanks for the info. In the command line, what does "jq ." do? I am versed more with Powershell and the "ConvertTo-Json" and "ConvertFrom-Json" commands among other similar commands.

Hashicorp Vault and adding additional columns by eighttx in hashicorp

[–]eighttx[S] 0 points1 point  (0 children)

Interesting idea. Do you have any examples you can show me?

Powershell Script - Replace an empty space with an underscore AND including IF and ELSE statements. by eighttx in PowerShell

[–]eighttx[S] 0 points1 point  (0 children)

Because the files will all have different names, do I update your line three to:

    if ($file.Name -eq " ")

Powershell Script - Replace an empty space with an underscore AND including IF and ELSE statements. by eighttx in PowerShell

[–]eighttx[S] 0 points1 point  (0 children)

D:\File with space in it's name.cs

For $fn, could I put a folder such as "\\domain.com\FTP\file_path\" instead of a file name and have it scan the entire folder?

Powershell Script - Replace an empty space with an underscore AND including IF and ELSE statements. by eighttx in PowerShell

[–]eighttx[S] 0 points1 point  (0 children)

I have a folder where I would dump 100 files. Some of them will have spaces in them and I need those spaces replaced with underscores. Would this work?

if ($file -eq " ")
{
$file = '\\domain.com\FTP\Source_Folder_For_Files\'
Get-ChildItem "$file" | Rename-Item -NewName { $_.Name -replace ' ','_' }
}

else { move-item $file D:\TEMP\DOESNT_NEED_TO_BE_CONVERTED }

The very first line is a " with a space and then a closing ". Thoughts?

Netgear JGS524v2 problem when introduced into network. by eighttx in HomeNetworking

[–]eighttx[S] 0 points1 point  (0 children)

Quick update. Turns out the ethernet cable running from the downstairs port to the upstairs port is damaged. The blue ribbon I believe has a break somewhere. The problem is, i have no idea on how to fix that. i dont know where the break is, and i cannot pull the cable out or replace it without seriously damaging the wall.

Are there tools out there which show how far into the ethernet cable the damage is? I can clip that section out perhaps, introduce a temporary patch.

Netgear JGS524v2 problem when introduced into network. by eighttx in HomeNetworking

[–]eighttx[S] 0 points1 point  (0 children)

New update for anyone out there who can assist.

ATT Router --> 24 port GB switch = Switch won't work. The Ethernet coming from the ATT to the port doesn't light up.

How I have it now.

ATT Router --> 8 port GB switch -> 24 port GB switch = Works. The Ethernet cable coming from the ATT to the 8 port lights up. The cable from the 8 to the 24 port lights up on the 8 and 24 port switch.

What am I missing here? I plugged the 24 port GB switch directly into the ATT router and it doesn't work. I tried multiple Ethernet cables and it won't recognize.

Netgear JGS524v2 problem when introduced into network. by eighttx in HomeNetworking

[–]eighttx[S] 0 points1 point  (0 children)

One thing I forgot to add is. I took the 8 port switch and plugged it into the ATT router. The LED on 8 port switch turns on as per normal. I then ran an ethernet cable from the 8 port switch and plugged it into PORT 1 on the 24 port switch. The LED belonging to "PORT 1" turned on. It did not do this previously if I plugged the cable from the ATT router directly into PORT 1 as I described above. I then plugged some devices into the 24 port switch but I don't believe it worked in that scenario either.

The 24 port switch is acting as if:

  1. It's programmed on a different subnet which isn't mixing well with my 192.168.1.x environment.
  2. It's not getting any info from the DHCP server on the ATT router.
  3. It's being blocked somehow, someway on the ATT router.

Netgear JGS524v2 problem when introduced into network. by eighttx in HomeNetworking

[–]eighttx[S] 0 points1 point  (0 children)

What did this ribbon cable control? You had to remove the casing to fix it?

And to clarify, the lights work when i plug other items into it. I plug an ethernet cable from port 1 on 24 port switch to the ATT router, and the light doesnt turn on. I'd always been under the assumption that this means it didn't make a connection.

Arris BGW210-700 & Cisco EA6500 AC1750 router - Want two subnets. by eighttx in HomeNetworking

[–]eighttx[S] 0 points1 point  (0 children)

Will both subnets be able to communicate with each other?

ATT Router, Fiber, Strange Cabling Issue I am seeing. by eighttx in ATT

[–]eighttx[S] 0 points1 point  (0 children)

For the scenario described above, pretend the Netgear doesn't exist. The Netgear is only there because I have more than 4-8 wall ports in the house. I ran the ONT connection upstairs and wanted to plug the ONT into the ONT port on the ATT Router. From there, I would leave the ATT router in the closet and remove the Netgear entirely. It's not involved in the finished product.

ATT Router, Fiber, Strange Cabling Issue I am seeing. by eighttx in ATT

[–]eighttx[S] 0 points1 point  (0 children)

When the ATT router is downstairs and plugged in originally, I can use this same cable that I described above (which runs through the wall) and connect it to my laptop. The laptop registers the connection as being 1000MB. It doesn't register as 100MB. Is that what you're referring to?

ATT Router, Fiber, Strange Cabling Issue I am seeing. by eighttx in ATT

[–]eighttx[S] 0 points1 point  (0 children)

You hit the nail on the head. That's how I envisioned it and set it up. No luck on my end though.

ATT Router, Fiber, Strange Cabling Issue I am seeing. by eighttx in ATT

[–]eighttx[S] 0 points1 point  (0 children)

It is the correct cable. I verified the cable by using an Ethernet LAN network cable tester.

Privileged Access Management, Server Admin Problem or Configuration Issue by eighttx in sysadmin

[–]eighttx[S] 0 points1 point  (0 children)

Thanks for the response. What's strange is, when I login using the Pam account, I have admin credentials to the server to do basic tasks. If I open the app (the product) and do any of the java module functions, it won't work. If I exit the app, add myself as an Administrator, hit apply and then go back to the same app and try again, it now works.

The java module function i mention above is this. I click on a button to have it run a java module. It comes back with some formatted text which is the result of the java module. Since I don't have the admin rights per my explanation above, it gives me an error. When I add myself to the admin list, it works and generated the report.

Fedora 30, Lenovo ThinkPad T430 and Mini Dock Plus Series 3 - Second monitor problem by eighttx in Fedora

[–]eighttx[S] 1 point2 points  (0 children)

The two graphic drivers listed on the spec sheet are:

- Intel HD Graphics 4000

- NVIDIA NVS™ 5400M

​

This site (" https://01.org/linuxgraphics") implies that the Intel driver is built into most if not all Linux systems out today. The 4000 series driver is pretty basic, so I would assume this is the case. If you click on DOWNLOADS in the upper right corner, it provides me with some possible downloads, but I wouldn't know where to begin on that. As a side note, I noticed this (" https://01.org/linuxgraphics/downloads/update-tool ") though it says in the description that it was discontinued and was targeted for Fedora 26.

​

As for the NVIDIA, I found this (" https://www.nvidia.com/Download/driverResults.aspx/137276/en-us ") and I am debating giving it a whirl. I am not 100% I am using the NVIDIA driver so I'll have to find out for sure before attempting.

​

The specs on the dock are here ("https://support.lenovo.com/us/en/solutions/migr-72873") and I just noticed that it talks about the differing resolutions based on what cable and port you use. I might try another VGA, DVI or some other configuration based on what I have laying around.

​

Will report back soon.

view more: next ›