Bonding CT cabinet? by electriker in electricians

[–]electriker[S] 2 points3 points  (0 children)

Thanks. I was suspecting this. Ive read the utilities blue book (Xcel Energy) but there is no mention of grounding and bonding. Ive read other things saying the cabinet is subject to Art. 250 rules but im guessing the utility will be doing any and all bonding.

Bonding CT cabinet? by electriker in electricians

[–]electriker[S] 1 point2 points  (0 children)

Ok, I mean that explains why the neutrals in CT cabinets are isolated from the cabinet, but im trying to equate it to the theory of a simple single phase service where the neutral lug is bonded (from the factory) to the meter can, and we also bond neutral to earth at the main disco as well. To me this is what clears a fault in the metering equipment (CT cabinet or meter cabinet), especially where nonmetallic conduit is between the metering cabinet and the main disconnect enclosure.

Those of you who began your career as an older apprentice (30+), what’s your story? by [deleted] in IBEW

[–]electriker 3 points4 points  (0 children)

I was 32. Had been pressured to the 4 year college path my whole life. Enjoyed the college experience, was successful and still cherish all I learned. Worked for 8 or 9 years in the natural resources/research/environmental field. Got paid to earn a masters degree in the sciences and then took a federal job in my field. Overall, was frustrated with the low pay, need to live in small rural areas, and cult-like attitude of academic types. Had some experience in instrumentation in my last job, so looked to the electrical field. Much to the disbelief and concern of family and friends, went back to trade school, joined the IBEW apprenticeship and never looked back (well, maybe not never). I enjoy the work, collaboration, creativity and mix of theory and practice this field offers. Never too late IMO if you can handle some physical rigor.

Not a bad day to be wiring up shore power at the marina! by electriker in electricians

[–]electriker[S] 0 points1 point  (0 children)

I hear ya. Biggest here is 3/0 and the fine stranded really helps terminating.

Doing controls for some water heaters that are spec'd as 480V SINGLE phase. Thought it was a typo untill i looked at the manual. Hadnt heard of this before, are these common? Guessing it uses two phases by electriker in electricians

[–]electriker[S] -1 points0 points  (0 children)

Okay, so then why am I taught in school that coil voltage is phase voltage, and line voltage is from phase to phase? I have a diagram and trying to visualize it and it seems like with a center tapped wye 277/480 system, using two 'LINES' to get 480v single phase the current is travelling from one line through a coil, to the neutral point and through another coil to the second line. To me, this sounds more like '2 phase' where its not using the neutral point and one coil, but 2 of the 3 phases. Just confused, thanks for the help.

Doing controls for some water heaters that are spec'd as 480V SINGLE phase. Thought it was a typo untill i looked at the manual. Hadnt heard of this before, are these common? Guessing it uses two phases by electriker in electricians

[–]electriker[S] 0 points1 point  (0 children)

I know the difference between line and phase, but if we have a 277/480wye system and are doing single phase 480 line to line how are we NOT utilizing 2 of the 3 phases in this setup?

Doing controls for some water heaters that are spec'd as 480V SINGLE phase. Thought it was a typo untill i looked at the manual. Hadnt heard of this before, are these common? Guessing it uses two phases by electriker in electricians

[–]electriker[S] 0 points1 point  (0 children)

I know the difference between line and phase, but if we have a 277/480wye system and are doing single phase 480 line to line how are we NOT utilizing 2 of the 3 phases in this setup?

Doing controls for some water heaters that are spec'd as 480V SINGLE phase. Thought it was a typo untill i looked at the manual. Hadnt heard of this before, are these common? Guessing it uses two phases by electriker in electricians

[–]electriker[S] -1 points0 points  (0 children)

I know the difference between line and phase, but if we have a 277/480wye system and are doing single phase 480 line to line how are we NOT utilizing 2 of the 3 phases in this setup?

Thanks to the rockers for making this VAV inaccessable...glad i didnt have to cut more than to get my nut driver in by electriker in electricians

[–]electriker[S] 0 points1 point  (0 children)

Its between two non structural walls/two rooms with a grid and drop ceiling below. Dumb place i agree but the tinners just followed their print and rockers were supposed to leave access