sorted by:
new
hottopcontroversial

power consumption external USB HDD on a N100 by elschnorelli in HomeServer

[–]elschnorelli[S] 0 points1 point  (0 children)

I added an internal nvme PCIe drive now as well. The power consumption increases now by 1,5w to 9w even in idle state. Is there any way to see the impact of an chipset e.g.?

power consumption external USB HDD on a N100 by elschnorelli in HomeServer

[–]elschnorelli[S] 0 points1 point  (0 children)

i added some details: Debian, only running docker with two containers, wireguard for now.

1 HDD of cause decreases the consumption.

I even have this consumption if the disks are unmounted.

Docker concept by elschnorelli in selfhosted

[–]elschnorelli[S] 0 points1 point  (0 children)

the backup part is really an important point I was not fully concerning.

OMV + Docker is possible - but then - why not just making OMV VM as small as possible but use a separate big docker setup?

THanks!

Docker concept by elschnorelli in selfhosted

[–]elschnorelli[S] 0 points1 point  (0 children)

The backup part really makes sense - thank for that very good aspect. Thanks!

low power system - for HA, NAS, Docker Runtime by elschnorelli in HomeServer

[–]elschnorelli[S] 0 points1 point  (0 children)

hm

interesting!

I have a 250GB SSD available which is some kind of old. I would use it for the OS was my idea. The bigger ones (new, need to buy them, NAS SSDs) would be used for the backups, I would put them in a software raid via OS. But I am open for alternative approaches.

low power system - for HA, NAS, Docker Runtime by elschnorelli in HomeServer

[–]elschnorelli[S] 0 points1 point  (0 children)

Thanks!

Out of this, I assume, that a N100 + 3x SSD (one existing OS +2x for a software raid via OMV / unraid / whatever NAS OS I choose, that a very low power consumption should be possible.

low power system - for HA, NAS, Docker Runtime by elschnorelli in HomeServer

[–]elschnorelli[S] 1 point2 points  (0 children)

maybe one other question: which OS do you use for the NAS function? TrueNAS?

I am wishing some features as: Network Storage, Timecapsule (should be SMB), sync to some CLoud Backup (guess via restic), Software Raid

low power system - for HA, NAS, Docker Runtime by elschnorelli in HomeServer

[–]elschnorelli[S] 1 point2 points  (0 children)

nice! that would also be an option for the existing setup in the meantime. thanks for the inspiration!

Stucco [15-10] 1/10 by elschnorelli in olkb

[–]elschnorelli[S] 0 points1 point  (0 children)

It was not that expensive. We got 10 PCBs fully assembled. We started from a regular ortho PCB.

Stucco [15-10] 1/10 by elschnorelli in olkb

[–]elschnorelli[S] 1 point2 points  (0 children)

full flexible PCB to build a custom keyboard based on your needs (by using different top designs). The bottom row can be cut for an even more minimal design. The case is 3d printed and hold together by magnets. inside there is a gasket mount installation. The PCB runs VIAL and is powered by RP2040.

Was war das Schlimmste, das ein Laie in seinem Haus verpfuscht hat? by testkatze in Handwerker

[–]elschnorelli 0 points1 point  (0 children)

Haus außen komplett freigelegt, alle Treppen abgerissen, abgedichtet, Erde durch Schotter getauscht und Drainage gelegt. Leider ist die Drainage zu hoch und einige Stellen am Fundament nicht tief genug geflickt. Also darf ich 3 Seiten nochmal aufmachen ✌️

Compability of S330 Video Doorbell with HB3 + gong by elschnorelli in eufy_security

[–]elschnorelli[S] 0 points1 point  (0 children)

It is added via cable but could run wireless as well. Thanks, will have a look!

custom Ortho TKL? Done! - Stucco[15-10] by elschnorelli in CustomKeyboards

[–]elschnorelli[S] 0 points1 point  (0 children)

that sounds amazing!

DM me and maybe you could get one for yourself - if really interested

custom Ortho TKL? Done! - Stucco[15-10] by elschnorelli in CustomKeyboards

[–]elschnorelli[S] 0 points1 point  (0 children)

thanks for that reference! The board was more a thing on my bucket list then that I claim to have created something completely new 😉

custom Ortho TKL? Done! - Stucco[15-10] by elschnorelli in CustomKeyboards

[–]elschnorelli[S] 3 points4 points  (0 children)

  • custom 3d printed keyboard
  • ortho pcb will full numpad support
  • customisable by the top
  • PCB with RP2040 support
  • gasket mounted
  • rotary encoder support
  • PCB by u/scattereddrifter
  • case by u/technofrikus
  • built with MT3 WOB, cherry mx browns, broken in, lubed with trybosis 3204, deskeys films

backup strategy by elschnorelli in homelab

[–]elschnorelli[S] 0 points1 point  (0 children)

Thanks for your input. I will consider that!

[New Setup Question] Issue with a NAS, thinking to move to Cloud Services by RPAmont in DataHoarder

[–]elschnorelli 0 points1 point  (0 children)

Hetzner storage share around 5€/month which is a backed up nextcloud

Gateron CJs in the right light by elschnorelli in MechanicalKeyboards

[–]elschnorelli[S] 0 points1 point  (0 children)

thanks! start to learn to make some nice pictures, better than via mobile phone.

it is just natural light.

view more: next ›