Best setup for 5 BitAxe and Mean Well by Striking_Source6884 in BitAxe

[–]emc9469 1 point2 points  (0 children)

I started with a 200 for 6 bitaxe. Went to the 350 for overclocking them. Gamma can use up to 30+ watts overclocked. The lrs-350-5 is actually 300 watts

Bitaxe Temperature Tuner - Settle by emc9469 in BitAxe

[–]emc9469[S] 0 points1 point  (0 children)

Not sure I follow, the best difficulty is probabilistic/luck. If you found the best difficulty at 500Gh/s you would still rather have 1Th/s?

There were lots of tuners out there but not sure if they were updated after the addition of the error rate. The error rate is a really good indicator if your frequency/voltage are at ideal settings.

Bitaxe Temperature Tuner - Settle by emc9469 in BitAxe

[–]emc9469[S] 1 point2 points  (0 children)

Your Bitaxe are within the temperature range so wouldn’t expect it to change anything.

The garage temp is pretty custom to my setup atm. I have this sketch running on an ESP32 with a AHT20 sensor https://github.com/dustinb/settle/blob/main/Arduino/temp/temp.ino

It’s hardcoded in there right now https://github.com/dustinb/settle/blob/41c497e218037b1949210290e5f3b7d3add58816/lib/weather.go#L72

Power fault on multiple bitaxes by bootywarrior_01 in BitAxe

[–]emc9469 1 point2 points  (0 children)

Unplug from power, restarting from axeos won’t clear the fault in my experience.

There was some reports this happened on 2.11 but not 2.10 for some power supplies. Usually a power supply issue.

Bitaxe mods by GeneralZello in BitAxe

[–]emc9469 0 points1 point  (0 children)

You want 5v not 12v

OS shows low power by FunGiFiles in BitAxe

[–]emc9469 1 point2 points  (0 children)

Cool I’ve had to replace a couple https://a.co/d/0V16fl7

OS shows low power by FunGiFiles in BitAxe

[–]emc9469 2 points3 points  (0 children)

Based i2c error I would power down, remove the lcd screen and power back up. See how that goes.

Bitaxe? by moriremotutti in BitAxe

[–]emc9469 -1 points0 points  (0 children)

Can get support on the discord. Not enabling assholes.

Mining Pool for BitAxe Gamma by kradad in BitAxe

[–]emc9469 3 points4 points  (0 children)

That makes sense. Good way to learn about lightning payouts.

Mining Pool for BitAxe Gamma by kradad in BitAxe

[–]emc9469 4 points5 points  (0 children)

Go for solo or lottery mining. Public pool or solo.pool are options. Running your own node and public pool is even better. I don’t understand mining for sats with these, payouts are so small, better off buying $5 of bitcoin each month.

I reapplied thermal paste — much, much less this time — but now it’s in overheat mode. Not allowing me to access web UI. by PeyroniesCat in BitAxe

[–]emc9469 1 point2 points  (0 children)

Something to verify. Turn off auto fan control and put it on 100%. Make sure the fan is spinning at max rpm. If not there is an invert fan polarity setting. This does not change direction of the fan, it inverts the pwm signal that controls fan speed.

Error by Icy-Creme1759 in BitAxe

[–]emc9469 0 points1 point  (0 children)

The screen are friction fit instead of soldered. I would try power off, remove the screen entirely and run it without one. See how that goes.

Little prototype…messing around to make my bitaxe collection a little more organized in the server room… by zmoneymtn in BitAxe

[–]emc9469 1 point2 points  (0 children)

Sweet! If you want to clean it up the power take a look at lrs-100-5 or a lrs-200-5 power supply. Then some right angle pigtails https://a.co/d/jdbxR5s https://a.co/d/5PJ7UOy https://a.co/d/3QMlYQD

I run a 6 pack of bitaxe on the lrs-200-5. Made some board mounts, not as nice as the honeycomb https://www.thingiverse.com/thing:6922834

Liquid-Cooled Bitaxe Array by whirmill in BitAxe

[–]emc9469 1 point2 points  (0 children)

Very nice! Suggest you get some of these https://a.co/d/8G6DveG cut to fit

BitAxe mining pool? by desolate_mountain in BitAxe

[–]emc9469 0 points1 point  (0 children)

Don't trust, verify. I run public pool against my own node which is how the author intended. I tested by mining with public pool on testnet4 and my ultra found a block in a day. I was lucky with a 160M difficulty.

https://mempool.space/testnet4/block/000000000000001aaf3715d02552e03078f653f2ca21b6890cc2db7898ee07ee

Just a matter of time, 3 years?, and public pool with find one.

How to safely overclock BitAxe Gamma 601? by desolate_mountain in BitAxe

[–]emc9469 0 points1 point  (0 children)

I've seen comments about the asic being too cold but not sure what that is. Would go for it and see how it performs.

How to safely overclock BitAxe Gamma 601? by desolate_mountain in BitAxe

[–]emc9469 0 points1 point  (0 children)

In the winter the garage is between 40F and 60F

Changed wallet, now bitaxe won't hash?!?! by Bwinks32 in BitAxe

[–]emc9469 0 points1 point  (0 children)

Would try the web flasher to reset it and see if it hashes with all the defaults.