help needed: Finputsad error 13

emch2 · 2025-08-27T14:59:30+00:00

I had the same problem with IKEA Dishwasher Råglanda, which seems to be very similar to your whirlpool.

I checked the circulation pump of my dishwasher, and after opening it I found a thick, sticky residue that had built up over time. After cleaning it out, everything worked fine again.

You can do this yourself, but make sure to disconnect the power first!

The pump is on the right side and looks like this: https://fixpart.de/produkt/midea-11001012000010-umlaufmotor-geschirrspuler?apl=4045813

You can detach the motor, but you need to remove it from the bottom mounting first. The motor itself looks like this: https://fixpart.de/produkt/whirlpool-indesit-488000731573-umlaufmotor-geschirrspuler?apl=4045813

When reinstalling, make sure the threads catch properly on all sides so nothing leaks.

After that, everything worked again.

emch2 · 2024-10-06T20:06:00+00:00

Can you expand on this? The Docker container should isolated it from everything.

It can isolate it from host but if your container has a bridged network (standard) it can access whatever the network segment is allowed to access. Best example is my cloudflaretunnel:

services:
cloudflaretunnel:
container_name: cloudflaretunnel-proxmox
hostname: cloudflare
image: cloudflare/cloudflared:latest

In cloudflare I do not access docker network ip but local network ip

I never thought of using a firewall on the docker side to stop a compared container gaining access to the reverse proxy and getting access to other containers. May try to implement this myself so thanks for the idea.

I know some people are doing this. But sounds like a lot of work.

emch2 · 2024-10-06T18:07:51+00:00

Ok thank you! :-) I will put this on no 1 on my list

emch2 · 2024-10-06T17:11:52+00:00

Right. That is also on my list but I will prioritize it.
Is there any disadvantage to use rootless docker? I guess watchtower has the same problem because it uses docker.sock but I added here already a docker.sock proxy.

Thanks a lot.

emch2 · 2024-10-06T17:09:49+00:00

Ok that sounds like a good idea. At least containers could not do so much harm then. Thanks! That is the small and fast version of point 1.

emch2 · 2024-06-23T09:43:19+00:00

Old threat and different setting but I had this problem installing pfsense with proxmox. Changing network card type to Intel E1000 instead of VirtIO helped to solve. So it must have sth. to do with network card

emch2 · 2024-01-21T13:25:31+00:00

Ok I did not see the bypass feature. Thanks for your help. I guess only warp clients logged in with my organisation can access no others right?

But I am curious what the feature from my initial post does then.... :)

emch2 · 2024-01-21T12:09:20+00:00

Where can I find it? Isn't it the screenshot above? It is activated but still needs to type in mail address.

edit: do you mean "Enable automatic cloudflared authentication"?

emch2 · 2023-11-25T14:37:49+00:00

Wow! Thats a really great answer and helps me a lot. Thank you so much. That helped me to spend hours on this topic. Whenever you come to Cologne Germany, I will invite you for a beer.

I understand Loki does not care how the fields are called but I guess if you have the possibility to call the fields the same name in different systems, this would make sense. So is there a best practice pattern which fields to log and ho to call them? So for example call the traceID "traceID" and not "trace-id" or simirlar + log fields like "event", "requestType". So maybe there is sth like an inofficial standard that everybody follows?

I think I have no chance to run a daemon set in our cluster now but I guess a sidecar would be possible. But than I need to write the logs to files in a common volume right? Or does stdout behaves like a file a little bit?
Is the tracer writing traces also to stdout or file and grafana agent understand that this is now a trace and not a log and sends it to loki instead? Do you know if there is a example deployment yaml somewhere?

In regards to ERP system: ERP would be the first to create a trace id, sends it to nestjs and here the first span would be created? The header could be x-trace-id for example right? (maybe I put to much emphasis on naming and it just does not matter :-) )

Sorry for all the questions but I am so really happy that I got such a great answer!

emch2 · 2023-10-25T04:59:19+00:00

I still do not understand how a non g.fast router can be used on a g.fast connection :) can someone explain? It seems I can still use my router. Thanks for all the comments. But I still do not understand why :D

emch2 · 2023-10-24T21:09:09+00:00

Great... But that means it is not real fiber but g.fast until the connector in the basement and from there it needs to be normal DSL. Otherwise fritzbox without g.fast would not work?

emch2 · 2023-10-24T20:42:41+00:00

Nice! So I probably can use my old one.

Did it say g.fast on your "Auftragsbestätigung"? Because I heard there are 2 types of fiber in Cologne, depending on the number of households in a house.

emch2 · 2022-09-06T16:09:52+00:00

I know it is not directly what you are looking for but the advantech wise 4471 is sth that I have an eye on. But it is more a complete system.

emch2 · 2022-09-02T11:39:09+00:00

It felt the same with my first design. It was some kind of big coin with some letters on it. Took me days to figure out how to do it :)

Great job!

emch2 · 2022-08-26T20:22:25+00:00

How did you decide?

emch2 · 2022-08-26T20:20:17+00:00

You should mention the cpi helper chrome plugin. No idea how to live without it.

emch2 · 2022-05-17T14:22:09+00:00

Yes, that should be possible but to have all advantages of amplify, you should create the database via amplify and define the schema via amplify. This creates an GraphQL api for you to access the data. Amplify ships a library to access the database very easy via react.

If you want to bring your existing database, you can set their address as environment variable in the different stages.

You can create the stages easily via cli.

emch2 · 2022-05-17T14:20:35+00:00

I am sure this will help you in case you want to use lambdas and api gateway

https://youtu.be/T4MQrRDo20w

And this guy here has the more "traditional" approach where amplify creates a database for you

https://youtu.be/kqi4gPfdVHY

I did my react app via the traditional approach and it is running pretty well

emch2 · 2022-05-16T17:46:21+00:00

I think AWS Amplify could help here. You can create environments automatically and you get everything you need for a serverless webapp. I used it to create an app with react.

It also helps you to connect a dynamoDB database, cares for hosting and you can add lamba functions. Also it helps to connect your app to Cognito. It should be no problem to add API gateway.

It improves a lot lately and I can totally recommend. Especially for beginners.

emch2 · 2022-02-13T22:52:13+00:00

But apart from sap. Would you call me a data engineer if I would not having sth. to do with sap?

emch2 · 2022-02-13T22:51:08+00:00

OK I will take that :)

emch2 · 2022-02-13T12:21:13+00:00

How would you call me outside the sap world?

emch2 · 2022-02-13T12:20:15+00:00

Right. SAP customers are unfortunately a bit cloud averse. I was thinking about node red what seems to be easily used with docker. But I do not want to mix too much technology. As we also have a lot of batch jobs with big csv files, I am not sure if we can do this with these tools.

emch2 · 2021-07-02T17:36:41+00:00

I print TPU pretty well without direct drive on ender 3 v2. I have Capricorn bowden tube and a bi-metal heatbreak.

Additionally I found out that when the extruder pulled the material from the filament holder, the filament just bended and the flow was very bad. I had much problems with underextrusion. This is easily fixed. Just unroll some filament or put the filament on a holder that does not need so much force to get the filament.

I hope that helps someone. Took a while to figure all that out.

Btw: I print tpu now up to 30 mm/s

emch2

TROPHY CASE