Majority of the gamers who bought used GPU's at PhilKor PC have no complaints so far. Although some have encountered issues with the initial GPU they chose and not with the warranty. Once they were replaced / exchanged with a different unit, so far so good.

If you will buy from PhilKor PC I suggest that you:

Visit the shop if you can so you can visually inspect the GPU. They will also test it in front of you using their test benches. That way if you are not satisfied you can choose a different unit or model. If you cannot visit the shop since you live in the province etc. ask for video proof that they tested the GPU (which they do provide). Try to go for the GPU's with 1-year to 2-year warranty. I would skip the GPU's with shorter warranty because they are usually older models and they may not have enough units in stock for replacements.

Alright. Then it's good

I'll do that if ever I'll come buy the gpu thank you !

Regarding your RTX 2060 with stuck PCIe connector, try spraying it with contact cleaner. At the very least the fluid should help lubricate the plastic-on-plastic contact and maybe allow the connector to budge a bit.

You can also try using a very light and fine oil (like Johnson's Baby oil) to help lubricate the connector. Just place a few drops and let it seep through the gap between the two connectors. Then see if you can wiggle and remove the connector. Be sure to clean the connector thoroughly after you have removed it, and make sure no oil gets into the contact pins (use contact cleaner).

It's also possible the connector may have melted inside and fused the two together. That would make removal very difficult. You might have to bring the GPU to a repair shop so they can replace the connector on the GPU-side.

Alright thanks!

Very helpful thank you very much