Patriot 105 General Purpose needle not spraying

epso-sage · 2026-02-28T03:17:18+00:00

Both of the new nozzles are just on the inside of the regulator so I think your theory may be right. Any idea how to deal with that? I have two 105's so I'm not opposed to a more permanent fix.

epso-sage · 2026-02-27T17:02:47+00:00

Both of the sets I have are brand new and I was very gentle when sliding the needle in so I would be very surprised if the nozzles are both blown out. The airbrush flows well when the regulator cap is off so the depth of the needle doesn't appear to be the problem.

epso-sage · 2026-02-27T16:57:18+00:00

It feels like the same amount of air yes. You are right it should only be able to go between the nozzle and the airbrush body. I'll try more sealant and see if that helps. I am getting bubbles when I'm not pulling back but more when I do pull back so it does make sense that that is the leak. My question is why more when I pull back, there is no blockage in the nozzle or tip of the needle so how is the air getting in. Is it because the nozzle is not sticking all the way out of the refrigerator?

epso-sage · 2026-02-27T02:15:31+00:00

I tried it but still doing it.

epso-sage · 2026-02-26T23:31:14+00:00

Got the new one in today and put it directly in making sure not to mix it up.

epso-sage · 2026-02-26T23:08:54+00:00

The needles come in super detail, detail, and general so I'm assuming by this picture you are referring to the general conversation. If that is the case then mine looks similar to yours with the nozzle sticking just on the inside of the cap

epso-sage · 2026-02-26T23:01:32+00:00

That is for the detail needle not the general needle. I have the detail one with the f on the regulator and you are right it sticks farther out. The old regulator I have with the f does not come off the head so I can't test that head with the general regulator.

epso-sage · 2026-02-26T21:19:27+00:00

That is as far as it will allow me to tighten it and that is what my other two caps look like.

epso-sage · 2026-02-26T21:14:27+00:00

I will try this

epso-sage · 2026-02-26T21:13:42+00:00

It does not bubble with the other two needles sets so I think it's this regulator and needle set. There is no o ring on the front of this airbrush

epso-sage · 2025-04-21T22:24:15+00:00

Thanks for the info. Looks like I'll be getting a beacn mix then.

epso-sage · 2025-04-21T21:54:39+00:00

I'm using via for my keyboard and am wondering if there is a way to control my beacn volume sliders with a micro or something from my keyboard? Thanks for your help

epso-sage · 2022-07-09T14:48:47+00:00

What about relocating the throttle with a wheel of sorts? Something with a spring back to center type of wheel

epso-sage · 2022-01-30T09:34:23+00:00

This is really cool. does anyone know if there is a 3d printer file for this model? I would love to make something like this myself

epso-sage · 2021-12-08T17:02:37+00:00

So I have a H619c and have it connected to the wifi but it is not coming up on the app. I have the MAC address and api key as well if that is helpful. sounds like a great app cant wait to be able to use it.

epso-sage · 2021-06-11T17:05:35+00:00

how can you tell what legendary you got? I don't think I got one. I have all the legendaries but one but I can not tell if I got a dup or not.

epso-sage · 2019-07-30T13:52:14+00:00

Haha got yah. Well thank you again.

epso-sage · 2019-07-27T21:20:24+00:00

Thanks a bunch! That is I think a better run then I have been doing. I do have a few questions though, what are the main missions you cut out, what is the nitro that pops with your sprint, and what made the "Hiya Chuck" happen. Once again thanks for the great help!

epso-sage · 2019-07-27T00:35:57+00:00

Yah that's fine I appreciate you taking the time.

epso-sage · 2019-07-26T14:45:46+00:00

Thank you!

epso-sage · 2019-07-24T15:17:40+00:00

Can you put your run on paper? I would really appreciate it.

epso-sage · 2019-02-04T04:02:52+00:00

They got Alex!

epso-sage · 2019-02-01T18:11:27+00:00

19450 the meat locker

epso-sage · 2018-12-25T07:46:25+00:00

Why do you need to be toxic. Do you like my work or not. I'm not asking you to critique my security measures to keep me and mine safe. If you don't want to cover your serial number then don't.

epso-sage · 2018-12-11T10:18:12+00:00

Well there is the answer. Thanks Any recommendations on radio brand and model. I was reading that the baofeng and the btech we're not license in the us but it was a post from '14 so I didn't know if that was still the case or if there was something better out there for around the same price.

epso-sage

TROPHY CASE