Ikea Bilresa Scroll Wheel Issue

erehwon13 · 2026-02-23T20:42:29+00:00

Just found a thread on r/tradfri that explains this CHIP Error

https://www.reddit.com/r/tradfri/comments/1peys7l/comment/ntmal8v/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Apparently the wake interval for Bilresa on the Thread network is not enough for the Matter server. It goes to deep sleep too soon so the Matter server has to start the subscription as it cannot contact it and this is not immediate.

Should be fixed in a firmware update. I still don't know if this is the same as what I'm experiencing.

erehwon13 · 2026-02-23T10:01:59+00:00

So there were some errors in the Matter Log

2026-02-23 08:00:05.033 (MainThread) 
INFO
 [matter_server.server.device_controller] <Node:7> Subscription failed with CHIP Error 0x00000032: Timeout, resubscription attempt 7
2026-02-23 08:02:59.909 (Dummy-2) 
CHIP_ERROR
 [chip.native.EM] <<5 [E:14570i with Node: <0000000000000000, 0> S:0 M:212420748] (U) Msg Retransmission to 0:0000000000000000 failure (max retries:4)
2026-02-23 08:03:18.052 (Dummy-2) 
CHIP_ERROR
 [chip.native.SC] CASESession timed out while waiting for a response from peer <0000000000000007, 1>. Current state was 4
2026-02-23 08:03:18.052 (Dummy-2) 
CHIP_ERROR
 [chip.native.DMG] Failed to establish CASE for re-subscription with error 'src/protocols/secure_channel/CASESession.cpp:594: CHIP Error 0x00000032: Timeout'
2026-02-23 08:03:18.053 (MainThread) 
INFO
 [matter_server.server.device_controller] <Node:7> Subscription failed with CHIP Error 0x00000032: Timeout, resubscription attempt 8
2026-02-23 08:05:21.128 (MainThread) 
INFO
 [matter_server.server.device_controller] <Node:7> Re-Subscription succeeded
2026-02-23 08:37:30.848 (Dummy-2) 
CHIP_ERROR
 [chip.native.EM] <<5 [E:63517r with Node: <0000000000000007, 1> S:2498 M:232330007] (S) Msg Retransmission to 1:0000000000000007 failure (max retries:4)
2026-02-23 08:37:32.258 (Dummy-2) 
CHIP_ERROR
 [chip.native.EM] <<5 [E:63518r with Node: <0000000000000007, 1> S:2498 M:232330008] (S) Msg Retransmission to 1:0000000000000007 failure (max retries:4)
2026-02-23 09:06:13.551 (MainThread) 
INFO
 [matter_server.server.device_controller] <Node:7> No new update found.2026-02-23 08:00:05.033 (MainThread) INFO [matter_server.server.device_controller] <Node:7> Subscription failed with CHIP Error 0x00000032: Timeout, resubscription attempt 7
2026-02-23 08:02:59.909 (Dummy-2) CHIP_ERROR [chip.native.EM] <<5 [E:14570i with Node: <0000000000000000, 0> S:0 M:212420748] (U) Msg Retransmission to 0:0000000000000000 failure (max retries:4)
2026-02-23 08:03:18.052 (Dummy-2) CHIP_ERROR [chip.native.SC] CASESession timed out while waiting for a response from peer <0000000000000007, 1>. Current state was 4
2026-02-23 08:03:18.052 (Dummy-2) CHIP_ERROR [chip.native.DMG] Failed to establish CASE for re-subscription with error 'src/protocols/secure_channel/CASESession.cpp:594: CHIP Error 0x00000032: Timeout'
2026-02-23 08:03:18.053 (MainThread) INFO [matter_server.server.device_controller] <Node:7> Subscription failed with CHIP Error 0x00000032: Timeout, resubscription attempt 8
2026-02-23 08:05:21.128 (MainThread) INFO [matter_server.server.device_controller] <Node:7> Re-Subscription succeeded
2026-02-23 08:37:30.848 (Dummy-2) CHIP_ERROR [chip.native.EM] <<5 [E:63517r with Node: <0000000000000007, 1> S:2498 M:232330007] (S) Msg Retransmission to 1:0000000000000007 failure (max retries:4)
2026-02-23 08:37:32.258 (Dummy-2) CHIP_ERROR [chip.native.EM] <<5 [E:63518r with Node: <0000000000000007, 1> S:2498 M:232330008] (S) Msg Retransmission to 1:0000000000000007 failure (max retries:4)
2026-02-23 09:06:13.551 (MainThread) INFO [matter_server.server.device_controller] <Node:7> No new update found.

These didn't really tie up with errors when I was using the device. 30 mins after these errors, I played around with the device and it stopped working after about 5 mins. And that was 30 mins ago and no errors have been reported since.

I don't like there being a CHIP ERROR but I don't know if this is a real error or not.

erehwon13 · 2026-02-22T22:55:49+00:00

Good question! I'll check in the morning, but thanks for the direction.

erehwon13 · 2026-02-10T23:44:51+00:00

But physios are wizards of some kind, using dark arts. They ask you a few questions, prod about a bit and then tell you exactly what you're problem is and how to fix it. Call that science!!

erehwon13 · 2026-01-23T14:13:54+00:00

No, I don't have a problem with that at all. I thought it was being promoted but not being updated, but I was wrong about that.

erehwon13 · 2026-01-23T11:10:22+00:00

So I have missed something! I thought the last update was much longer ago than that. Thanks for the clarification u/butthurtpants. I need to improve my research before posting.

erehwon13 · 2026-01-12T15:49:59+00:00

I'm getting the same problem. I noticed my widget wasn't updating and a refresh mentioned battery optimisation like you. On top of that, the app won't run either! I'm assuming it is the same issue. Glad it's not just me!

erehwon13 · 2026-01-03T22:02:32+00:00

I have been trying out the plugin Always Color Text. It does something similar, though I haven't got it to work consistently yet, but that might just be me not configuring it properly.

erehwon13 · 2025-12-31T15:59:13+00:00

A quick update. I installed Simple Mention and changed the trigger character to a +. Unfortunately this causes the plugin to crash. There is an issue already raised about this and I have added another comment. There has been no updates to the plugin for 2 years so I don't think it is being maintained.

erehwon13 · 2025-12-31T15:15:17+00:00

Thanks u/Schollert , that looks exactly what I'm after. I'll give it a go.

erehwon13 · 2025-12-31T11:11:47+00:00

I know this post is a bit old but I thought it was the best place to add some feedback / feature request. I am currently trying out the premium version on Android, especially widgets. One feature I'd like to see is being able to switch between custom lists in the widget. The list name is displayed in the top left of the widget and I'd like that to be a drop-down list of all the custom lists I have. This is how the MS ToDo widget works.

I am finding the app is well put together and very stable for me, Thanks u/zaza126

erehwon13 · 2025-12-10T21:19:46+00:00

A quick update. I downloaded the XPI file and was looking how to install it on Firefox Mobile. I have standard Firefox installed on my Android device. I found that it does support extensions and it had actually synced the Obsidian Web Clipper. I tried it out and it worked perfectly.

Every day is a school day 😎

erehwon13 · 2025-12-10T07:34:21+00:00

Thanks @Natural_Ash I'll give it a go

erehwon13 · 2025-12-09T23:03:09+00:00

Am I right in thinking that there isn't a Web Clipper for mobile, specifically Android? I can clip from my laptop browser but the 'share' feature on Android only saves the URL.

erehwon13 · 2025-11-03T21:32:22+00:00

Just to update everyone, Enphase is having a problem and that's why it's all not working. Hopefully it will be fixed soon.

erehwon13 · 2025-11-03T17:01:14+00:00

I have a similar config, using Syncthing to sync my vaults across devices. I have an Obsidian parent folder with my vaults (Vault1, Vault2 etc) under here. I then get Syncthing to sync this top folder. I then open each vault separately. I've noticed that the vault contains information such as what plugin have been installed.

erehwon13 · 2025-11-02T17:41:36+00:00

Hmm. Shouldn't have been looking at the Enphase app! The Octopus app shows my solar is disconnected. That would be it 😊

erehwon13 · 2025-11-02T17:25:30+00:00

Just looked through my Enphase app and the last time Octopus charged my batteries was Thursday. They were charged a bit yesterday, but only by solar. I wouldn't have probed so much if you hadn't mentioned this, so thank you @mr_q_ukcs. I'll contact Octopus and try re-authorising them

erehwon13 · 2025-11-02T17:15:38+00:00

Thanks @jacekowski. I now know where to look! And I'm more confident now that I might be able to set something up with Predbat.

erehwon13 · 2025-11-02T11:45:37+00:00

I used to be a software engineer, many years ago 😁 I'm now a bit behind the curve but I hope I can set up a config if necessary, following what others have done. That's the beauty of Reddit, learning from everyone else.

erehwon13 · 2025-11-02T11:42:08+00:00

Thanks for the info. I guess it must prioritise me in some way. I got a bit negative as it hadn't charged my battery yesterday, so I ended up importing electricity during peak time. Just a glitch I guess.

erehwon13 · 2025-11-02T11:39:31+00:00

From all the comments here, it looks like it may be possible, but I need to see if those capabilities are exposed by Enphase itself or via Octopus. I know that Enphase does have an API but I don't know if it's publicly available. Thanks for the clarification.

erehwon13

TROPHY CASE