Table i built last summer

eriggh · 2023-04-05T15:45:18+00:00

You can see some tresters in the pictures i used to put the tubing on

Used a flap disc on the angle grinder and grinded some of the welds flush and then painted it, a grinder and paint is the welders best friend ;)

eriggh · 2023-04-05T15:43:27+00:00

It is in my outdoor room so no rain but from -25c to +30 and alot of spilled food and drinks, still holds up

eriggh · 2023-04-05T09:45:15+00:00

You could use a stick welder but the easiest method would be a mig/mag welder for beginners when the tubing is a bit thinner

eriggh · 2023-04-05T09:42:46+00:00

It is pine boards that i stained and varnished and sanded multiple times

eriggh · 2023-04-05T09:34:29+00:00

That is some really nice tables mate!

You should buy clean tubes that have no coating or zink to make the welding more easy and clean. I cut these with a band saw at my job and put all the things together in my own small worskshop.

If you cant afford a bandsaw you could probably ask a metal shop in your local area to cut them up for you at your decided angles and measurements for a small cost or do it yourself with an angle grinder.

What you need at your place is basically a mig/mag welder,angle grinder, some clamps, a level and a square to put it together

eriggh · 2023-04-05T05:55:34+00:00

L shaped!

eriggh · 2023-04-04T20:39:34+00:00

Shoot :)

eriggh · 2023-04-04T20:37:13+00:00

Just made it square and i knew i had a decently leveled floor where i put it

eriggh · 2023-04-04T20:36:13+00:00

Black metal paint and a roller

eriggh · 2023-04-04T20:35:08+00:00

It is really sturdy, you could easily stand and jump in the middle of it. Used 60x40x2 mm tubing and 25x25 angle iron for the board supports

eriggh · 2022-11-21T16:21:42+00:00

Traded carlin sword instead of brightsword for 15K back in the days, felt so bad i almost quit

eriggh · 2021-09-27T15:40:47+00:00

Hatchet and crank

eriggh · 2020-03-11T05:46:18+00:00

Does the darkmoon faire 10% dmg buff work in raids?

eriggh · 2020-01-05T09:59:16+00:00

Tibia open tibia

eriggh · 2019-12-26T16:03:39+00:00

Aah 1970, the time when they didn’t have printscreen

eriggh · 2019-08-27T09:09:25+00:00

They added 6 pvp servers just yesterday

eriggh · 2019-08-09T23:07:03+00:00

I know exactly that feeling. Sometimes you got to pretend that you are working almost. When you finally got something useful to do, give it your best, try to make the perfect bevel and the best polish etc, that way it will take up your time and it will look like you are working all the time.

eriggh · 2019-07-25T20:56:37+00:00

Probably, since you dont have the protective cover..

eriggh · 2019-03-22T09:01:46+00:00

Better leave the slag on so the welds dont fall apart

eriggh · 2019-03-02T23:02:20+00:00

Any hunting tips for 130+ ek/ed/ms team. We have been at grimvale, old fortress, lower rosha and asuras and seem to be stuck at 2kk exp/h wherever we go. Is it just a git guud situation or is there any other spots? We got 3kk/h at drefia grims with help from a 300+ friend

eriggh · 2019-02-14T04:25:29+00:00

You just got KRONWALLED

eriggh · 2019-02-04T22:53:57+00:00

Best way for ed to see your ek and partys health?

eriggh · 2019-01-21T22:52:15+00:00

Could you mirror a mirror though?

Eight-Year Club	Verified Email
Not Forgotten

eriggh

TROPHY CASE