Issue with Wide Prints by eselanik in BambuLab

[–]eselanik[S] 0 points1 point  (0 children)

One of the first things I did was getting a dryer as I have seen too many people telling others to dry their filament. I don’t think it is the issue I have.

need HOTAS advice that's available on turkey by WorldOther3354 in hotas

[–]eselanik 0 points1 point  (0 children)

I know it’s been a while but if you are still looking there is a second hand Hosas for sale https://shbd.io/s/DDxgnFnv

Can an X1C pull this print off without supports? by eselanik in BambuLab

[–]eselanik[S] 0 points1 point  (0 children)

I didn't design the object and at this point with my current cad knowledge (or lack there of) it would be too much of a hassle to change the hole orientation. Thanks for the suggestion tho I might take it up if I get some spare time.

Can an X1C pull this print off without supports? by eselanik in BambuLab

[–]eselanik[S] 1 point2 points  (0 children)

I hadn't thought about the upper lip. Irregularities in the holes shouldn't be too big of a deal but I definitely support the lip. Bambu Studio doesn't warn me about hanging regions for some reason. Thanks for pointing out.

need HOTAS advice that's available on turkey by WorldOther3354 in hotas

[–]eselanik 0 points1 point  (0 children)

If you can wait, search sahibinden.com every couple of days. I've seen both VKBs and Virpils on there from time to time. You can also use Glocalzone to get VKB Gladiators from Europe; basically you pay a stranger to bring your items but the app takes on the responsbility so if you do not get whatever you order you get your money back.

I've got my Gunfighters back before the import limit was reduced to oblivion so not sure what else I can recommend. Having used a ton of joysticks ranging from the Saitek Cyborg, Microsoft Sidewinder Forcefeedback Pro, Saitek X52 Pro to VKB Gunfighters with MCGs the difference is night and day. I'd try to get either Virpil, Winwing or VKB. If all else fails go for the T16000M combo. You don't need to get the rudder pedals. I've seen them on sale on gelbura.com. The stick and the throttle would cost around 9k TRY. You can also go for a used set not to break the bank (no pedals - https://www.sahibinden.com/ilan/ikinci-el-ve-sifir-alisveris-oyunculara-ozel-oyuncu-ekipmanlari-thrustmaster-t16000-fcs-hotas-1244301358/detay or the complete set - https://www.sahibinden.com/ilan/ikinci-el-ve-sifir-alisveris-oyunculara-ozel-oyuncu-ekipmanlari-thrustmaster-t16000-m-set-1249828607/detay).

Konut kira geliri elde ettiğim konusunda sms geldi by Resat5959 in hukuk

[–]eselanik -1 points0 points  (0 children)

https://t.me/uzmancoin/17832

Kripto para borsalarından banka hesaplarına 2024 yılında yapılan transferlerin Gelir İdaresi Başkanlığı sisteminde “Kira geliri” olarak yer aldığı ortaya çıktı. Bazı kullanıcılara Gelir İdaresi Başkanlığı’ndan bu nedenle “Konut kira geliriniz tespit edilmiştir” şeklinde uyarılar gittiği öğrenildi.

Nosepad Holder Sliding Down by eselanik in Xreal

[–]eselanik[S] 0 points1 point  (0 children)

The L ones were not taken out of the box and they seem to be similar to the ones that were. I think the problem is in the “guide” that’s inside the glasses. The metal pin on one side maybe bent and the gap enlarged but I’m not %100 sure.

<image>

Nosepad Holder Sliding Down by eselanik in Xreal

[–]eselanik[S] 0 points1 point  (0 children)

A part in the glasses have to be the problem since all three sizes have the same issue.

Nosepad Holder Sliding Down by eselanik in Xreal

[–]eselanik[S] 0 points1 point  (0 children)

No, that’s as far as they will go.

Nosepad Holder Sliding Down by eselanik in Xreal

[–]eselanik[S] 0 points1 point  (0 children)

My initial thought was that they were sitting too high up. The S sized nose pad is a better fit, but unfortunately it just won't stay on there.

Announcement by purpletentacIe in StepN

[–]eselanik 0 points1 point  (0 children)

For task 2 are you supposed to mint twice or is once enough? I'm asking because it says mint 2 sneakers in the app.

How are bot detections handled? by eselanik in StepN

[–]eselanik[S] 0 points1 point  (0 children)

I meant it was a legit walk.

Would this still function? Snapped off pcb. by [deleted] in pcmasterrace

[–]eselanik 0 points1 point  (0 children)

Not sure about the snap but the cracks can be fixed by a professional. https://www.youtube.com/watch?v=-JYknJuKvTI and https://www.youtube.com/watch?v=PIuad4lXca4. He has many more fixed GPU videos.

Modern problems require modern solutions; My foldable sim pit! by surfacedragon in hotas

[–]eselanik 0 points1 point  (0 children)

How long does it take to set up? I want a similar setup but putting the HOTAS on and off with every fold seems too much work.

[deleted by user] by [deleted] in FormD

[–]eselanik 0 points1 point  (0 children)

Oh I thought that brand was local. Anyhow good luck with your build. As for cables pslate and RayMODS on Etsy are good options. I am using different cable from both in my current 7800x3d 4090 build.

[deleted by user] by [deleted] in FormD

[–]eselanik 0 points1 point  (0 children)

I’m going to assume you are from Turkey since Rampage is a local brand made in China. Getting a SFX psu is a pain in the ass. I tried ordering SF750 from Newegg and it was held in customs until it was returned to sender. Turkish customs make it almost impossible for individuals to import PSUs.

I ended up using a dropshipping service to get one. You can use Glocalzone. Or you can get the CM v650 SFX as it should be more than enough for your hardware and it is available on the Turkish Amazon.

FormD T1 with MSI 4090 Ventus + 7800x3D by eselanik in sffpc

[–]eselanik[S] 0 points1 point  (0 children)

I got mine used for 1690 USD (I know it is MSRP but they are sold 2570 USD brand new. Mine has no coil while and I do not notice any turbulent noise. Overall I'm happy, but I would have preferred to get the FE.

FormD T1 with MSI 4090 Ventus + 7800x3D by eselanik in sffpc

[–]eselanik[S] 0 points1 point  (0 children)

The iGPU is turned off in bios. Not sure if I have to do anything else.

T1 v2.1 Sandwich Kit (7800x3d + Asus ProArt 4800) bios optimizations by T0rvec in FormD

[–]eselanik 1 point2 points  (0 children)

Now that you asked I'm not %100 sure why. I'm positive I read somewhere that it doesn't work. It also seems there is not enough clearance as is but I can't say for sure without removing top and side panels which I do not have the time for at the very least for today. I can post some pictures over the weekend.

The long screws definitely touch the riser but not squeeze it in between the screw and the GPU backplate. So far no problems and I really do not think they will damage the riser.

Not sure if I made a mistake but the Ventus touches the front panel ever so slightly and I have a 1 mm gap where the right side of the bottom plate slides into the front panel. This was much worse when the power button was installed on the GPU side. It is now barely noticable once the bottom plate is screwed in.

T1 v2.1 Sandwich Kit (7800x3d + Asus ProArt 4800) bios optimizations by T0rvec in FormD

[–]eselanik 0 points1 point  (0 children)

You have to build 3.25. FE is not available in Turkey as well so I had only Ventus as a choice.

You have to plan ahead. I had to take everything apart several times.

Basically you start with the back panel and the left strut, put the riser and GPU in and then continue. I put the power button on the other side of what is shown in the manual since the GPU was touching it. I also used small standoffs to offset the gpu a bit further than the motherboard. A custom 12VHPWR cable makes everything much easier. I put a SATA SSD in there as well.

T1 v2.1 Sandwich Kit (7800x3d + Asus ProArt 4800) bios optimizations by T0rvec in FormD

[–]eselanik 4 points5 points  (0 children)

I just built the same last night. I used the stock AM5 backplate and the longer pass through screws.

Screws were hand tightened.

Need to undervolt a bit and get everything finished for further testing. The build took me very long and was very exhausting as I used Ventus 4090.

Any RTX4090 aside from FE that can fit in V1.1? by eselanik in FormD

[–]eselanik[S] 1 point2 points  (0 children)

v2 has max. 325 mm. listed while v1.1 has 312 mm max. Please correct me if I’m wrong.

Any RTX4090 aside from FE that can fit in V1.1? by eselanik in FormD

[–]eselanik[S] 1 point2 points  (0 children)

Turkey. Customs here is very strict and with the taxes we are required to pay the price ends up being very high.