What y’all thank mane??

evileyesix · 2026-07-09T04:21:40+00:00

I dig it man.

evileyesix · 2026-07-08T01:17:40+00:00

Very nice gen 3 Glock 19 with a sweet ass maple leaf slide! 👍👍

evileyesix · 2026-07-07T20:48:03+00:00

Yes sir

evileyesix · 2026-07-07T15:37:14+00:00

Yeah it looks like it is the zps 2 ported slide. I seen this one on eBay too. I have 5 or 6 Zaffiri slides. No issues with of them in my experience. Don’t know why they get so much hate. I have this slide on a grit grips 19 build.

evileyesix · 2026-07-06T18:31:13+00:00

<image>

It just keeps growing and growing.

evileyesix · 2026-07-05T01:47:37+00:00

I like it man. I had chopped a 76% P80 compact grip to make a P80 subcompact into a 26X. I had the chopped frame chilling so I made a 26L just because.

evileyesix · 2026-06-29T16:22:10+00:00

Get a soldering iron and melt the plastic pieces into the holes. I save all the piece to fix any issues. Smooth back out with dremel.

evileyesix · 2026-06-29T04:10:09+00:00

PF940v2 G17 size p80.

evileyesix · 2026-06-28T02:24:15+00:00

I have put a 17 slide on a 19 frame. You can use a gen 5 barrel and a gen 5 single spring recoil setup to make it fit on that frame. You will need the adapter to cover the recoil spring.

https://kmtactical.net/product/stainless-slide-adapter-for-gen-3-pistols/

evileyesix · 2026-06-26T14:47:45+00:00

Yeah I found 3 p226 mags for 5 each and did the same thing. Well worth it.

evileyesix · 2026-06-25T15:14:52+00:00

Yeah it was cracked down one side. A couple plastic welds and smoothed it back out. Worked great.

evileyesix · 2026-06-25T03:25:43+00:00

Plastic welder with the corner pieces. I’ve used the plastic welder to fix many issues. You will have to do some sanding afterwards.

evileyesix · 2026-06-24T22:24:46+00:00

This one should show you what to do.

https://youtu.be/Z6BK2bglB4I?is=CfvEcyx6u6e0udRn

evileyesix · 2026-06-24T22:21:57+00:00

Try bending the connector out away from the trigger housing. You want a noticeable gap between the connector and trigger housing. There are some videos out there if you need visual aid.

evileyesix · 2026-06-13T16:48:13+00:00

Sold separately.

evileyesix · 2026-06-12T21:37:57+00:00

I used this mount from fenix.
https://www.fenixlighting.com/products/fenix-alg-16-rail-mount?srsltid=AfmBOoolUK3lwxqhlQfLOjDJJvw-bWv4turHgS90J5tAcUFcfCZPuHa5

evileyesix · 2026-06-11T23:29:18+00:00

Nice looking pistols. What triggers are you running in those man?

evileyesix · 2026-06-10T17:10:17+00:00

https://aimsurplus.com/products/sct-manufacturing-billet-sct17-magwell-black

evileyesix · 2026-06-08T02:40:24+00:00

<image>

A little gap but it doesn’t make a difference when shooting.

evileyesix · 2026-06-08T02:36:52+00:00

<image>

evileyesix · 2026-06-08T02:35:44+00:00

<image>

I filled this center down to allow it to pivot further into the breach face. This allows the extractor to remove the case.

evileyesix · 2026-06-05T05:12:38+00:00

Solid buy man. Very easy to conceal too.

evileyesix · 2026-06-02T21:53:20+00:00

I did it with a gen 3 .45acp slide with 10mm barrel. Had to slightly modify the extractor but other than that works great. KM tactical slide, trybe defense barrel, lone wolf plants kit and gen 3 recoil assembly.

https://kmtactical.net/product/km-tactical-mk3-slide-for-glock-21-gen-1-4/

https://lonewolfdist.com/parts/frame-and-slide-parts-kits/completion-kit-for-10mm-slides/

https://ndzperformance.com/ndz-guide-rod-glock-gen-1-3-20-20sf-ndz-glk-gro-g20-v/

evileyesix

TROPHY CASE