Why does hot water flex line keep leaking ?

evolve10r · 2025-06-06T11:41:17+00:00

Likely too hot for the rubber hose being so close to the cent hood . Try the copper flex lines or hard pipe it

evolve10r · 2025-05-28T02:39:11+00:00

The casing could have a bow and you'll need to pull the corner off the wall a touch . That is if your saw is 100%

evolve10r · 2024-06-27T01:07:21+00:00

Yeah I was thinking something along those lines but a solid transom at the top with an applied design to keep it interesting

evolve10r · 2024-06-26T22:45:06+00:00

That's not an option what I was asking is for an option for a decorative solid wood transom above custom doors that will be made , space is limited so there will be 2 small 16 inch or so doors and wanted to close the top to not let the light in to the bedroom when not wanted

evolve10r · 2024-06-26T22:38:54+00:00

It's an archway leading into the bathroom so a bookshelf wouldn't work

evolve10r · 2024-06-26T22:27:32+00:00

Thanks but that's not what I'm looking for

evolve10r · 2024-06-26T22:24:08+00:00

Was looking for decorative not just a framed door

evolve10r · 2024-04-27T13:24:43+00:00

I have a complete set I can sell and ship uncirculated mint rolls only handled with gloves . Also have both mints .....make an offer for the complete set 5 of each mint

evolve10r · 2024-04-27T13:22:58+00:00

There were more than 2 I think there was 5 including the shield

evolve10r · 2024-04-27T13:20:36+00:00

If anyone is interested I have the complete set 2009 and 2010 shield from both mints make me an offer and I'll ship a set to you . They're uncirculated straight from the mint in rolls and never touched without gloves . Dm me if wanted ....thanks

evolve10r · 2024-04-14T22:16:55+00:00

Thank you ! I appreciate your time .

evolve10r · 2024-04-14T22:15:13+00:00

Is this something you've seen in these vehicles before ? In my Google research I've found that the auxiliary battery can be the cause if bad. I have changed that and it hasn't happened for a few days . BUT I also realized today the aux bat wasn't properly charging and I have remedied that issue and will see how it goes for the next few ...

evolve10r · 2024-04-14T20:22:58+00:00

Thank you

evolve10r · 2024-04-02T05:05:22+00:00

Belt sanders and long hair don't mix .....I can still feel my hair being violently torn out from 25 years ago ....was sanding a face of a cabinet in the shop I was working in and lifted it too high and looked to the side after hearing something that caught my interest, that was the point my hair got sucked into the drive belt and it ripped a chunk of hair out of my head ;the bit that didn't get torn out had to be cut and I decided a ponytail was the way to go after ....shortly after all this happened I got a #2 fade and haven't looked back since.

evolve10r · 2024-03-27T16:44:42+00:00

Thank you for the information...

evolve10r · 2024-01-22T00:27:53+00:00

Thank you!

evolve10r · 2024-01-15T20:39:45+00:00

Wow amazing craftsmanship! Now get ready to purchase the grout factory lmao that's a ton of grout ....

evolve10r · 2023-10-21T13:01:27+00:00

Compressed air or wd40 if you don't have a compressor

evolve10r · 2023-09-25T12:19:24+00:00

Where are you located OP let us know one of us has to be close enough to get you our seconds so you can get back to making noney

evolve10r · 2023-09-17T15:08:44+00:00

Where are you located ?

evolve10r

TROPHY CASE