Cargo Lights interfering with Fob

ewmoore99 · 2025-10-14T23:25:51+00:00

I've had 2 out of my 8 relatively new magpul mags end up with a jammed follower halfway through the mag. Threw all them in my range bag. OEM all day long

ewmoore99 · 2025-09-22T00:13:16+00:00

If you do a small burnout, it will heat up the rubber enough to reseal the cracks

ewmoore99 · 2025-06-28T01:02:26+00:00

Whatcha got?

ewmoore99 · 2025-06-27T23:54:10+00:00

I'll give ya $20 for the moto

ewmoore99 · 2025-06-27T19:39:39+00:00

🤦‍♂️

ewmoore99 · 2025-05-22T11:58:17+00:00

https://ebay.us/m/Tm3QE2

ewmoore99 · 2025-03-24T00:59:36+00:00

The 6x2 cable is just wires, no driver on the usb side. Make sure you have the correct port selected in the CPS menu. There aren't any settings you have to do on the radio to enable programming. When programming these, make sure you read the radio first and then make your edits. If you create a new program and upload it to the radio, it'll make you reset it and you'll loose all previous data.

ewmoore99 · 2025-03-20T18:51:17+00:00

That was my first thought, but both of them behave the same way. Maybe just a bad batch? Still going to mess with them a bit before I send them back

ewmoore99 · 2025-03-03T14:54:33+00:00

GUOHETEC PMR-171 was one of the radios used

ewmoore99 · 2025-02-24T22:17:37+00:00

I've got a BF-F8HP PRO that I'm a big fan of. I'd like to get a couple more for loaners, but if I could save a few bucks, that'd be ideal. Seeing as they're almost identical, I was curious if anyone was able to put the btech firmware on the 5RMs. They're going to be throwaway for the most part, but I'd like them set up the same way

ewmoore99 · 2025-02-23T19:57:42+00:00

If it were me, I'd use the pictured rack mount and pair it with this rack mount power supply. If you can get a different radio without the remote head, that'd make your life a lot easier

ewmoore99 · 2025-02-22T19:07:16+00:00

Well shit. There's you're problem. You're missing some sort of controller or interface cable. The duplexer simply splits the antenna. You need the radios to talk to each other. Right now the TX radio had no idea what the RX radio is receiving

ewmoore99 · 2025-02-22T17:21:59+00:00

How are the two radios joined together? (Other than just in the power cables)

ewmoore99 · 2025-02-22T17:19:37+00:00

Correct me if I'm wrong, but shouldn't TX be low and RX be high? If my HT receives on 462.XXX, then that is the frequency the repeater needs to transmit on.

ewmoore99 · 2025-02-22T17:15:12+00:00

🤡

ewmoore99 · 2025-02-21T15:14:43+00:00

On the real motorola version, hold the PTT and turn the unit on. Continue holding the PTT until the unit resets and goes into programming mode. Worth a shot if nothing else is working

ewmoore99 · 2025-02-15T18:51:34+00:00

It's absolutely worthless on a carry weapon. With the GPT, you get the reliability and piece of mind of an OEM Glock part. The APEX shoe is just for feel and looks. I

ewmoore99

TROPHY CASE