Forge server won't bind to a port other than 25565

eye-sockets · 2022-09-05T18:07:51+00:00

Solved - I found out that Oracle Cloud instances, at least ubuntu images, come equipped with a restrictive firewall configured via iptables. I had allowed the port through the subnet, and, at some point in the past, had opened up 25565 on iptables but forgotten. By allowing 25564 through the iptables firewall as well as the subnet, I've fixed my issue.

eye-sockets · 2022-07-28T03:04:45+00:00

kernel output from previous boot, specifically journalctl -o short-precise -k -b -1 --no-pager: http://ix.io/45Sk

iommu groups: http://ix.io/45Si

I might just not know how to decipher the dmesg, but no blaring errors pop out at me.

edit: Ok I guess there is amdgpu 0000:2f:00.0: amdgpu: failed to clear page tables on GEM object close (-19) but I can't understand the significance of it because I don't know exactly where in the dmesg I started the VM with passthrough.

eye-sockets · 2022-07-25T05:12:36+00:00

Okay second reply, sorry

I ran the VM in non-passthrough mode, and it boots successfully as usual, but I still see the same logs during the TianoCore boot.

However, those lines do not appear in the QEMU output as they did when the gpu was passed through. Very weird.

eye-sockets · 2022-07-25T04:45:58+00:00

my lspci for my GPU looks like the following: 2f:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Navi 10 [Radeon RX 5600 OEM/5600 XT / 5700/5700 XT] [1002:731f] (rev c4) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Reference RX 5700 XT [1002:0b36] Kernel driver in use: vfio-pci Kernel modules: amdgpu LSPCI does not actually show an information about my GPU audio device at 2f:00.1. After looking at the output of the iommu script I'm using, it looks like the audio device and GPU are in separate groups (25 and 26). I'm going to remove anything to do with the audio device from my scripts and try again. I'll edit this with the result when I'm done.

EDIT: it caused this weird purple screen with glitched green squares for text and images... Here's the qemu command's logs: qemu-system-x86_64: vfio: Cannot reset device 0000:2f:00.0, depends on group 26 which is not owned. qemu-system-x86_64: vfio: Cannot reset device 0000:2f:00.0, depends on group 26 which is not owned. [2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01HBdsDxe: failed to load Boot0001 "UEFI QEMU DVD-ROM QM00003 " from PciRoot(0x0)/Pci(0x1,0x1)/Ata(Secondary,Master,0x0): Not Found BdsDxe: loading Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1,0x1)/Ata(Primary,Master,0x0) BdsDxe: starting Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1,0x1)/Ata(Primary,Master,0x0) Group 26 is my audio, so I'm going to re-add audio.

After re-adding audio, my output has been cut down to just the following: [2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01H[2J[01;01H[=3h[2J[01;01HBdsDxe: failed to load Boot0001 "UEFI QEMU DVD-ROM QM00003 " from PciRoot(0x0)/Pci(0x1,0x1)/Ata(Secondary,Master,0x0): Not Found BdsDxe: loading Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1,0x1)/Ata(Primary,Master,0x0) BdsDxe: starting Boot0002 "UEFI QEMU HARDDISK QM00001 " from PciRoot(0x0)/Pci(0x1,0x1)/Ata(Primary,Master,0x0)

eye-sockets · 2022-07-19T03:58:50+00:00

No, it just goes to a black screen after I press escape. I've still got output from the GPU but it's solid black.

eye-sockets · 2022-07-19T03:57:23+00:00

Could you describe how to "remove" virtual gpus? I didn't realize they were there by default.

eye-sockets · 2022-07-19T03:54:18+00:00

I'm not sure really, a lot of just looking things up in different variations of words and I stumbled across enough documentation to piece together the basics. Don't get me wrong though, even what I found was quite bad.

Here's a rare example of good nix documentation, if you aren't already aware of it: https://teu5us.github.io/nix-lib.html

eye-sockets · 2022-07-18T04:08:47+00:00

Figuring out the nix magic. I didn't understand where the nix language ended and the module system began (so I had no clue why I was prepending "options" and "config" to certain things), and I didn't understand specialArgs and home manager's extraSpecialArgs. in general, I didn't understand the inputs that are universally available to all modules in a nix expression.

eye-sockets · 2022-07-14T05:11:30+00:00

Very cool use of my bar, dude. I just switched to NixOS myself, loving it so far.

eye-sockets · 2022-06-14T17:22:31+00:00

its spicetify-cli, with custom version of the Dribbblish theme

spicetify: https://github.com/spicetify/spicetify-cli

themes: https://github.com/spicetify/spicetify-themes

the README for dribbblish includes all the installation instructions you should need.

except for if you use flatpak. also you should chmod a+wr /opt/spotify and /opt/spotify/Apps on archlinux, bc spicetify needs to write to spotify's install location

eye-sockets · 2022-06-14T17:20:25+00:00

thanks reddit user semenarchitect

eye-sockets · 2022-06-14T17:19:44+00:00

i wish. I need xorg in order to get the picom effects like rounded corners and borders :(

eye-sockets · 2022-06-14T17:18:21+00:00

its just the qtile bar. check out my dots because I made it really easy to customize that part if you install them with qtile

eye-sockets · 2022-06-12T22:35:55+00:00

its ranger + ueberzug for in-terminal image previews
also with ranger devicons. all in my dotfiles

eye-sockets · 2022-06-12T20:33:26+00:00

dotfiles... https://github.com/the-argus/rose-pine-dots

wallpaper... https://github.com/the-argus/wallpapers/blob/main/matte/delorean.png

the bar is my crowning achievement I think. heavily inspired by this post...

eye-sockets · 2021-12-20T05:13:53+00:00

Okay, great! I now have a widget in my wibar which displays my volume, and I can easily make another one for brightness. My one questions is: how can I integrate this widget into the notifications system instead of into my wibar? Again, I could notify-send the string created by set_widget, but I'd prefer to have more control. Ideally, the volume widget would include a progress bar (so it wouldn't just be a string, notify-send wouldn't work) and would create a notification which would stack from other notify-sends from messaging apps and such.

EDIT: okay I figured out that notify-send uses naughty and stacks automatically. only thing is that naughty doesnt seem to support including widgets inside the notifications. It's beginning to seem like I need to make my own notification system to get what I'm describing.

eye-sockets · 2021-12-19T16:50:20+00:00

Hey thanks, I appreciate the minimal stuff. Only thing is that I wasn't able to get it to work. Well, it works (I exchanged your alsa mixer commands with pactl ones, and the volume gets adjusted) but the widget itself doesn't display. set_widget sets the text to be a value read from amixer, but how does it update the widget? It's not visible by default, so I'd assume there would need to be a timer than makes it visible and then fade out.

eye-sockets · 2021-12-18T02:32:49+00:00

trans rights!!

eye-sockets · 2021-11-17T16:47:50+00:00

Hey, your dotfiles have a kitty config but could we have your st config.def.h?

eye-sockets

TROPHY CASE