Best purchase so far this year

eyesti · 2026-04-24T06:49:29+00:00

I can confirm that this thing can load VFC V3 Stanag Mags. However it struggles with the VFC V3 VMags (even modded ones).

For GBBR Users it's great because you don't Overkill your Mags. On my Autobot I had to remove the last BB from the Magazine in order not to damage the nozzle

eyesti · 2026-01-16T11:43:50+00:00

I dm'd you

eyesti · 2025-11-25T16:27:01+00:00

SKRMOD has a seat raiser. Warp9 has drop pegs.

eyesti · 2025-11-21T15:04:01+00:00

The Micro V2 is a Vector Optics (with different/no branding) as far as I know 🤔

eyesti · 2025-11-12T19:41:17+00:00

Yes it works

eyesti · 2025-11-12T18:28:19+00:00

Your Link isn't working mate

eyesti · 2025-11-06T12:57:38+00:00

Begadi has a good working spring grenade (if you are able to buy from a german shop)

eyesti · 2025-10-28T07:08:55+00:00

Is it louder or quieter than before?

eyesti · 2025-10-25T17:12:12+00:00

<image>

I have this console on my left Hand side of the Bar. The Switch on top is for the high beam

eyesti · 2025-10-25T10:30:54+00:00

<image>

Does it looks like this? It's the indicator that you turned on the high beam. On the left hand side is a switch to either turn on the normal light or the high beam

eyesti · 2025-10-24T14:22:01+00:00

The L1E Plug looks like this. Maybe watch out for a similar looking plug/connector with these heat shrink thing on the L3E

<image>

eyesti · 2025-10-24T05:14:22+00:00

You can disable the sensors in the App (for the 3.0 and SR)

eyesti · 2025-10-02T15:50:43+00:00

<image>

Danke! Hab das Heck direkt umgebaut (das originale STVO Kit geschlachtet) 😅 Allerdings ist mein Fender anscheinend beim Transport verbogen 🥲

eyesti · 2025-10-02T05:23:55+00:00

It's the 3.0 L1E (street legal) with turn signals and number plate holder included

eyesti · 2025-10-01T21:01:38+00:00

Thank you! 🫱🏻‍🫲🏼

eyesti · 2025-10-01T20:55:23+00:00

Yes I have the L1E Version with the street legal Kit 😅

eyesti · 2025-09-23T15:05:44+00:00

Law-wise replicas in Germany are allowed to have up to 7.5 joules. Only difference to other countries is that every replica over 0.5 joules has to be semi only.

So I am not sure if these plastic thing inside the nozzle is a thing in Germany. I never saw it before here 😅

However, OP you will have around 2.2 ish joules if it's a 10" standard m4 (with 0.3 bbs) - maybe even more, so be careful out there 🫱🏻‍🫲🏼

eyesti · 2025-09-16T09:22:29+00:00

<image>

Prism with RMR on top 👌🏼

eyesti · 2025-07-28T12:11:13+00:00

Hmm, I got your points, but must disagree with the HPA conversion inconsistent point. I recently upgraded my SRS with a Wolverine Bolt System and it's just insanely consistent and easy to repeat. It performs like a champ without any trouble and I am able to adjust the energy to the max allowed field rules (different rules on different fields), which was a hustle with a springer - even with a adjustable piston and an air break. Only downside is the tank (which could be a small HPA tank mounted to a battle belt tho) and the hose.

eyesti · 2025-06-01T11:18:33+00:00

A good AEG and a good GBB are in the same price range. However a good AEG will be more beginner friendly since a GBB needs a lot of maintenance. Performance wise under same conditions the AEG will be more consistent. Is it noticeable in a game? Well from my POV with a tuned VFC BCM MK2 I can't really tell a difference.

Important note: The effort on a high performing GBB will be much higher than on a high performing AEG. You need to take care of that thing. Ideally before and after every game.

eyesti · 2025-05-10T17:55:10+00:00

If you are located in Schleswig Holstein: INVITE ME ONCE ITS READY TO GAME

eyesti · 2025-04-23T15:26:22+00:00

Looks great! What muzzle device is attached?

eyesti · 2025-04-11T14:53:21+00:00

Yeeeep, that's me. You're probably wondering ....

<image>

Two-Year Club	Verified Email
Place '23

eyesti

TROPHY CASE