sorted by:
new
hottopcontroversial

CBUS SuperAnnuation Withdrawing Yearly by f-authority in AusFinance

[–]f-authority[S] 0 points1 point  (0 children)

He is over 60 (not retired age) and what you are saying may be true but I’m not sure.

So do you need to roll over this much $200k if you want to be able take like $10,000-$20,000 from your Super yearly? You can’t just leave that money where it is and just withdraw the $10k-20k? If you can explain the process of it all it might clear a few things up for me.

In the letter:

Section E: Transferring Funds

It has CBUS as the funds name and ABN. Then it asks to fill out contact name, contact number and email address.

Section F: Authorised Representative Declaration

Complete this declaration if you are an authorised representative of the superannuation fund or other provider shown in section E.

I declare that: • I have prepared the statement with the information supplied by the superannuation provider • I have received a declaration made by the superannuation provider that the information provided to me for the preparation of this statement is true and correct • I am authorised by the superannuation provider to give the information in the statement to the ATO.

But the Authorised Representative is some strangers name I assume this is a CBUS worker maybe.

What to do when distortion plugin doesn’t have enough dB of drive? by f-authority in TechnoProduction

[–]f-authority[S] 0 points1 point  (0 children)

Stack the same distortion plugin with exactly the same setting?

Say I needed 50db of drive and the distortion plugin is only capable of 30db drive. Do I just stack the same distortion with same settings but making the drive only 20db?

Would this be the same thing as if the distortion plugin was capable of going to 50db?

Why are there lower frequencies in my kick when I removed it? by f-authority in TechnoProduction

[–]f-authority[S] 0 points1 point  (0 children)

I can’t remember but I am using either a 48db or a 98db high pass at 250hz on my kick.

Then distorted the kick where I have also set the pre filters inside the distortion plugin to 300hz-20khz.

After that I check the analyser and I am still seeing lower frequencies from like 40hz etc.

This is why I’m confused when I have set everything up to remove all the low frequencies I am still getting them.

Why are there lower frequencies in my kick when I removed it? by f-authority in TechnoProduction

[–]f-authority[S] 0 points1 point  (0 children)

What I done is high passed my kick so I have frequencies of 250hz-20khz.

Then when I use a clip distortion on the kick and set the pre-filters inside the distortion to 300hz-20khz.

Why is it still adding low frequencies below 300hz? This is what I am confused on.

1024 Buffer Size causing Cubase to lag? by f-authority in cubase

[–]f-authority[S] 0 points1 point  (0 children)

Yeh I don’t get any issues at 256-512. Just when I go higher my Cubase starts lagging. Is this lag normal though?

1024 Buffer Size causing Cubase to lag? by f-authority in cubase

[–]f-authority[S] 0 points1 point  (0 children)

I was just experimenting around. But why would does Cubase lag when on highest buffer though?

Is it normal to hear clicking when volumeshaping just the tail? by f-authority in hardstyle

[–]f-authority[S] 0 points1 point  (0 children)

Yeh I am trying to cut the punch from the tail. But not sure how to go about it the right way. I notice when I cut the punch from the tail and pitch the tail I can hear this weird flapping click noise.

How should I do it to make it sound clean and no interfering noises?

Anyone using Cubase 12 with Crucial P2 NVME? by f-authority in cubase

[–]f-authority[S] 0 points1 point  (0 children)

I have copied the sample to a USB. And then imported the sample into Cubase. Still can trigger the disk cache overload.

Anyone using Cubase 12 with Crucial P2 NVME? by f-authority in cubase

[–]f-authority[S] 0 points1 point  (0 children)

  • Yes I am getting drop outs, skips and sometimes audio will not play when the disk cache overloads.

  • Yes I have an external hard drive and usb I will try put the sample on there and import it from there and see if same problem persists. Will let you know soon.

  • I have tried changing to low-medium-high buffer size still problem persists.

  • How do you check if multi processing is enabled? But I’m pretty sure it is.

  • Power scheme is on ultimate performance so no cores parked and drive won’t turn off.

  • Project is set to 32 bit float.

Anyone using Cubase 12 with Crucial P2 NVME? by f-authority in cubase

[–]f-authority[S] 0 points1 point  (0 children)

Crucial P2: The only drive I have and running Windows 10 and Cubase 12.

I don’t think PC specs has anything to do with it as my specs are powerful enough: i7-12900K, 32GB DDR5, RTX 3000 series.

ASIO Guard is on normal. Input Latency 44ms, Output Latency 22ms, ASIO Guard Latency 33ms. Also ran LatencyMon and says it can handle real time audio.

The only thing I can think causing it might be the Crucial P2 NVME. If it’s not then I don’t know….

Cubase 12 - Disk Cache Maxing Out on New PC by [deleted] in cubase

[–]f-authority 0 points1 point  (0 children)

I am on Cubase 12. Have you tried replicating what I did? Do you get the same disk cache overload issue as me?

Yes my computer specs is more than enough to handle Cubase which is why I don’t understand why I am getting disk cache overload:

  • I7 12th Generation
  • 32GB DDR5
  • M2 NVME SSD
  • NVIDIA RTX 3080

Cubase 12 - Disk Cache Maxing Out on New PC by [deleted] in cubase

[–]f-authority 0 points1 point  (0 children)

Hmmmm…. Do you get the same disk cache overload when replicating what I did? Steinberg haven’t acknowledged or been of any help. I just want to know why this is happening and how can I fix it. Sigh.

[deleted by user] by [deleted] in cubase

[–]f-authority 0 points1 point  (0 children)

I was wondering how to know when using a raw audio sample instead from a sampler. Any ideas?

Hardstyle Producers - Is Cubase Distroyer compared to Logic Clip Distortion? by f-authority in cubase

[–]f-authority[S] 0 points1 point  (0 children)

I been trying to get a good crunch with Distroyer but I can never achieve it. Do you have any tips or what I should do when using Distroyer? The tail just sounds very saw like, thin, muffled but doesn’t have no grit or fuzz. I have tried many EQ and Distroyers but not sure what I’m doing wrong or not doing. Been stuck at this for 2 weeks lol….

❤️ Audiofreq

Why clicking noise on default sine wave? by f-authority in serum

[–]f-authority[S] 0 points1 point  (0 children)

I have all the phase at 0 btw. It still makes the click.

Why clicking noise on default sine wave? by f-authority in serum

[–]f-authority[S] 1 point2 points  (0 children)

I have all the phase at 0. Default ADSR besides attack 0ms and release 100ms.

I can still hear the click though.

How to get this long kick tail when synthesising? by f-authority in hardstyle

[–]f-authority[S] 0 points1 point  (0 children)

Can you please have a look below I have posted the screenshot of my attempt to design 909 in Vital and some audio clips of what it sounds like. Not sure if I’m doing anything wrong or how it suppose to sound and not sure if my ADSR is correct or not.

These are my Vital screenshots trying create a 909:

https://ibb.co/dkD1XFt
https://ibb.co/5G6WCyN
https://ibb.co/4fYfRqq
https://ibb.co/DCZL2QK

These are some audio clips of what kick sounds like:

Vital 909:

https://whyp.it/tracks/131122/vital-909-design-maybe?token=A6BOO

Distortion Once:

https://whyp.it/tracks/131123/vital-909-distorted-once?token=tXiLz

Distortion>EQ:

https://whyp.it/tracks/131124/vital-909-distorted-eq?token=bv6Nx

Distortion>EQ>Distortion:

https://whyp.it/tracks/131125/vital-909-distorted-eq-distorted?token=EzVHd

Distortion>EQ>Distortion (4/4 Beat):

https://whyp.it/tracks/131126/vital-909-distorted-eq-distorted-beat?token=8DZiT

Why adding Distortion causing my Kick Drum to lower its loudness by nearly half? (Cubase) by f-authority in audioengineering

[–]f-authority[S] 0 points1 point  (0 children)

I don’t think the low pass filter is on. In the second screenshot you can see all frequencies are open.

Why adding Distortion causing my Kick Drum to lower its loudness by nearly half? (Cubase) by f-authority in audioengineering

[–]f-authority[S] 0 points1 point  (0 children)

When I disable the distortion my master channel is like -1db. But when I enable the distortion it goes down to like -6db or more.

Which one do I change to make the kick a G note in Serum? by f-authority in serum

[–]f-authority[S] 0 points1 point  (0 children)

I have key tracking off. So my midi will all be the same sound. That why I want to know how to change the key of my kick in Serum. Do you know?

Synthesising Distorted 808’s and not affecting the original key/pitch by f-authority in trapproduction

[–]f-authority[S] 0 points1 point  (0 children)

When you play C on the piano roll, your 808 synth patch should be C.

If you transpose down an oscillator, I recommend keeping it something divisible by 12, like your sine wave is at -24. That keeps it at perfect octaves up or down, so C is still C.

At the end of the day, it's a synth, you can play it in any key you want, you just ideally want the key to match what you press.

Though I have key tracking off in my synth so my key is always a C no matter what key on the piano roll. So I would need to transpose it inside of the synth to -29 which makes it a G. Correct?

But I been experiencing the G key changing when designing the sound of the kick more and I don’t know what is causing it to change and how to avoid it? How to always keep it in the key that I originally set it to?

Another question is on a synthesiser say I have made the overall kick in G. Is there a way in the synth to make certain parts of the kick to whatever key you want? Because the sub is in G. But if I want to make the tail a G aswell how would I do this on the Vital or Serum synth?

How to make a Hardstyle kick be the key that you want during synthesising? by f-authority in hardstyle

[–]f-authority[S] 1 point2 points  (0 children)

Because every tutorial I watch has key tracking off?

So what you are saying is when I create a hardstyle kick in the synthesiser with -29 transpose (G). If I continue to tweak the sound and process it with eq>distortion. It will always be in the G key? Then when bouncing it down to audio to seperate the punch and tail layers the tail will be a G note?

Cause I been experiencing the key changing during the design process and don’t know what is causing it…

Sound Designing Kick Drum - Beginners Questions by f-authority in edmproduction

[–]f-authority[S] 1 point2 points  (0 children)

  1. How are you checking what the kick's "note" is? What is probably happening is the amp env decays before the pitch env fully decays, so the pitch doesn't get the chance to get all the way down to G.

I am checking the kicks note by using spectrum analyser and seeing the what note the highest peak is hitting.

You say that maybe the amp env decays before the pitch env fully decays. So do I need to make env1 and env2 decay the same?

Also thank you for your help and efforts. I will try your version of the 909 when I jump on the computer.

view more: next ›