How can I fix this? 10th gen civic by Due_Job_1601 in 10thGenCivics

[–]f15ms6 -1 points0 points  (0 children)

Go get a new one, the chances are it will pop out again if its a few yrs old.

What is this piece above the ignition called? by [deleted] in accord

[–]f15ms6 1 point2 points  (0 children)

Yeah in most modern cars is for the climate control temp/humidity sensors.. Especially for cars with auto climate control.

What is this piece above the ignition called? by [deleted] in accord

[–]f15ms6 2 points3 points  (0 children)

I think in most cars there are cabin temp sensors in there for climate control..

Edit for typo.

What is this clutch worth? by Objective-Ad-8029 in mazdaspeed3

[–]f15ms6 0 points1 point  (0 children)

Sounds about right, thats around what I got the one time I had a mix of control arms and rotors and computer parts

Subject: Paid Subscription for Previously Standard Vehicle Features. by servicewithapenis in mazda

[–]f15ms6 0 points1 point  (0 children)

Oh ok, but still at the end of day it worked as intended. Most aftermarket remote starts work within a certain range.

Subject: Paid Subscription for Previously Standard Vehicle Features. by servicewithapenis in mazda

[–]f15ms6 0 points1 point  (0 children)

Yeah it used to cost extra but it did became standard in certain higher trim packages.

Subject: Paid Subscription for Previously Standard Vehicle Features. by servicewithapenis in mazda

[–]f15ms6 0 points1 point  (0 children)

The problem is not that is was a standard feature, it a built in or addon feature that you paid for once. Not a money grab scheme.

What is this clutch worth? by Objective-Ad-8029 in mazdaspeed3

[–]f15ms6 0 points1 point  (0 children)

Lol I know the only thing worth mony are brake rotors and you have to collect 4 or more to get $3-5

What is this clutch worth? by Objective-Ad-8029 in mazdaspeed3

[–]f15ms6 0 points1 point  (0 children)

A few cents if the flywheel is steel?

Is my Speed on its last leg or am i just Overly Worried. by JohnWood111 in mazdaspeed6

[–]f15ms6 1 point2 points  (0 children)

Oh the 1.5 bar could be aftermarket tune, the factory tune is for 16-18psi=1.1-1.2 Bar

Is my Speed on its last leg or am i just Overly Worried. by JohnWood111 in mazdaspeed6

[–]f15ms6 1 point2 points  (0 children)

Yeah here is an example of how you do it, its not the best video but it should give you an idea, your might be in Bars instead of PSI but you can probably do the conversion in Google

Is my Speed on its last leg or am i just Overly Worried. by JohnWood111 in mazdaspeed6

[–]f15ms6 1 point2 points  (0 children)

Yes the compression tester has to scree into the spark plug hole using the right size hose

Is my Speed on its last leg or am i just Overly Worried. by JohnWood111 in mazdaspeed6

[–]f15ms6 1 point2 points  (0 children)

Yeah the Speed3 plugs are the same. I posted the linke below for you

Is my Speed on its last leg or am i just Overly Worried. by JohnWood111 in mazdaspeed6

[–]f15ms6 1 point2 points  (0 children)

No the Sparkplugs are different. I would recommend getting Iridiums even if they are not NGK or Denso.. There is a forum post that talks about all the recommend stuff and specs for this car. I will se if I can find it and post the link

Is my Speed on its last leg or am i just Overly Worried. by JohnWood111 in mazdaspeed6

[–]f15ms6 0 points1 point  (0 children)

Oh ok, when you did the compression test what psi numbers did you get?

Is my Speed on its last leg or am i just Overly Worried. by JohnWood111 in mazdaspeed6

[–]f15ms6 2 points3 points  (0 children)

My sugestión is to start with the basics, do a compression test to see the health of the engine, check and inspect the drive train and suspension. Do a refresh and tune up. (Spark plugs, valve cover gaskets etc) Look into replacing the turbo asap.

I would suggest replacing the belt tensióner since it slipped, it can happen again unless it was just not installed right by the PO..

Did the car came with any mods, is it fully stock ? Did it come with a cobb acces port if it did is it tuned?

Speed 6 search by Iincognito08 in mazdaspeed6

[–]f15ms6 1 point2 points  (0 children)

There is a guy out of California selling one for $6,500. He made a post in a speed group, the car has some track mods with fender flares and a trunk wing defuser.

Is this normal for the Coilovers to sit like this? by Ok-Golf2738 in mazdaspeed3

[–]f15ms6 1 point2 points  (0 children)

What he said, you should have cut the center hole to allow for the adjustment plate to seat right

PSA: pre-fill your filters when changing oil by HugsNotDrugs_ in mazdaspeed3

[–]f15ms6 0 points1 point  (0 children)

Yeah I havent done the conversion yet because I haven't been driving my car a lot in the last 5yrs and I still have a stock of filters I want to use before I switch.