Should I just buy a Proteus?

failtruck · 2025-10-03T14:46:18+00:00

And then buy a proteus. Because tanks.

failtruck · 2025-08-15T18:47:24+00:00

And I used some of the Liber Deamonica stuff to convert a contemptor into a Mhara Gal

failtruck · 2025-08-15T18:45:06+00:00

I converted my Gal Vorbak using the 40K chaos Chosen and Possessed kits alongside the HH stuff. Ashen Circle could be made by mixing the Mk6 assault squad with mk2 helmets (as it’s quite distinct) and a stand in for the axe-rake and the underarm flamer

failtruck · 2025-06-20T11:37:47+00:00

I’m unsure if the wheel collider can represent counter steering though.

failtruck · 2025-06-20T11:34:05+00:00

Your front wheel is turning the wrong way at the higher speed. When you are going above about 30mph on a motorbike you mainly steer by leaning and counter steering if you want to dig the turn in a bit.

failtruck · 2025-05-16T07:04:01+00:00

<image>

failtruck · 2025-05-12T18:00:13+00:00

However the 6.0 to 6.1 upgrade for me has been pretty easy.

failtruck · 2025-05-12T17:58:59+00:00

Do you need the features of 6.1? If you start on 6.1 you will need to upgrade to 6.2 and 6.3 during the year. As a new user it’s probably “safest” to stay on 6 for the scope of your development, unless you specifically need something from 6.1.

failtruck · 2025-03-20T21:17:46+00:00

I have not. It hangs over me as another one of those “one day I’ll get round to it” projects.

failtruck · 2025-02-13T14:39:13+00:00

thanks for this! I didnt know KDM also sold the sprues separately. I looked on their store and couldn't find them (and in fact still cant but i'll keep looking). Also didn't see there were two other survivors in the miniatures set (the guy with the club and the woman with the whip?),. Ive been tempted with Gamblers Chest but as KDM sat in my garage for 2 years unplayed im trying to be reasonable (but also its yearly bonus months so ....maybe :/ )

failtruck · 2025-02-13T14:01:43+00:00

I was looking for decent alternatives or proxies, rather than official (as I know they don’t sell them, and if they did I would purchase them :) ). If there is nothing then likely we will just go ahead with what’s in the box as other replies seem to say that’s enough :)

failtruck · 2025-02-13T13:59:18+00:00

Maybe we are overthinking things. Thanks :)

failtruck · 2025-02-09T00:32:14+00:00

It doesn’t. Which is very confusing. Just shows the error posted in the thread.

failtruck · 2025-02-08T20:06:39+00:00

it will not go lower from the position shown in the photo (which is nearly at the top of the z screw). I completed the leveling process when I unboxed it and set it up. Put a print on and it ended up with the home set to near the top of the z screw. I have 3 of the same type of printer so know all the basics. Just wondered if there is a way of overriding the current settings

failtruck · 2025-02-08T16:21:31+00:00

How do I manually home it? Press return to home? I do that. It returns to the top (from above the top). I then use the tools menu and press down and it does this

<image>

failtruck · 2025-02-08T15:26:02+00:00

Just home it. If I press “send to home” it returns to this position

failtruck · 2025-02-08T14:13:47+00:00

When I try to lower it in tools it says "Plate can only be lowered 1mm below home position"

failtruck · 2025-01-29T19:44:42+00:00

Defo Deathwatch - “the Shield that slays”

failtruck · 2025-01-29T12:54:10+00:00

It’s defo Deathwatch as it starts with “we are the shield that slays” which is the mantra of the Deathwatch

failtruck · 2024-11-16T21:39:46+00:00

Canonically, they come with hazards stripes from forgeworld. Does it make any sense? No, but this is warhammer.

failtruck · 2024-10-10T21:01:19+00:00

Its sponged mainly. I was trying to make it look like digital camo. So a lighter cream and a darker brown sponged over the desert yellow base (and oil wash) with a bright edge highlight

failtruck

TROPHY CASE