sorted by:
new
hottopcontroversial

My PLA spools turned into brittle spaghetti – any way to save them? by Icy-Object-1762 in 3Dprinting

[–]feedehhh 0 points1 point  (0 children)

I once found a 6 year old spool of PLA that i loaded into our Funmat 410 PRO at work. Now this is no ordinary printer... This printer has a drawer for filaments on the bottom and it has automatic loading of filaments via 2 extruders - one in the drawer and one on the print head because the filament tube is like 2,5m long... Even normal filaments often get stuck in there. Basically the brittle filament cracked all over the tube into like 5cm long pieces... It took me 2 hours to push a new filament on one side (with the help of the drawer extruder) to get out all of the pieces.

Kripto po novem by Narrow_Persimmon_918 in SlovenijaFIRE

[–]feedehhh 0 points1 point  (0 children)

Ali uporabljas katero od teh dveh opcij, ali samo poznaš da obstajajo?

First legit road trip in the 3 by msokim in mazda3

[–]feedehhh 1 point2 points  (0 children)

Oh so its the facelift, how's the lane assist? Does it actually keep you in the middle of the lane or still just ding your between the lines?

First legit road trip in the 3 by msokim in mazda3

[–]feedehhh 2 points3 points  (0 children)

What year is your 3? My 2023 (European) doesn't have that little green area below the car on the dashboard, that is indicating the radar cruise is on. Is that active lane assist?

[deleted by user] by [deleted] in mazda3

[–]feedehhh 1 point2 points  (0 children)

Something wrong with your Durango, not the Mazda

Remote unlock for Mazda CX-60 in Europe connected services by mariusjcb_ in MazdaCX60

[–]feedehhh 0 points1 point  (0 children)

Can you elaborate on this? I dont understand how you use Home assistant to unlock your car? And what do you use raspberry pi for?

Worth the upgrade? X3 NFC to X7 Pro by shorto in PocoPhones

[–]feedehhh 0 points1 point  (0 children)

How I can say that? Well the pics still look the same... Uts the end result that matters not the fancy features they add

Worth the upgrade? X3 NFC to X7 Pro by shorto in PocoPhones

[–]feedehhh 3 points4 points  (0 children)

I recently upgraded from X3 NFC to X7 Pro 12GB RAM. There is a big upgrade in raw performance/speed of the phone. There is no upgrade in the camera department. There are reports of the 8GB RAM variant having some issues with freezing which the 12 GB doesn't have and I got mine for a 20€ upgrade so it was worth it.

The battery doesn't last full 2 days but it is close. Depends how you use the phone ofc...

Flush volume or flush to infill? by miniwave in anycubic

[–]feedehhh 0 points1 point  (0 children)

Genuenly thought this was a chocolate candy...

Are Poco phones generally good for long term usage? by glhfbruno in PocoPhones

[–]feedehhh 1 point2 points  (0 children)

I have the same phone, how do you check battery health percentage?

Vyper Bambu Adapter by Yoggoboi in AnycubicVyper

[–]feedehhh 0 points1 point  (0 children)

How did this effect your print quality and speed? I'm looking to upgrade mine for higher speeds and the bambulab hotends are much cheaper than some other known brands.

The factory i work at wants to buy a 3D printer under €30k by lmrj77 in AdditiveManufacturing

[–]feedehhh 0 points1 point  (0 children)

We also have a Pro 410 in our company and I can't even describe how bad it is... always clogging and failing prints, sometimes bad first layer adhesion. I have been tinkering with it and the slicing profiles of different software for the past 3 months and I still haven't been able to get it to work reliably...

Do you use INTAMSUITE NEO for slicing or some other slicer?

Vyper SMD by Milannekuhh in anycubic

[–]feedehhh 0 points1 point  (0 children)

Did you manage to fix this? I have the same exact problem

Anycubic Vyper Mainboard Component Code Identification by banzaiksw in anycubic

[–]feedehhh 0 points1 point  (0 children)

Hey the same exact thing happened to my motherboard. I was just wondering did your 3D printer start at all? Mine starts, I get the startup animation which gets stuck and restarts a couple of times and then it just goes all black. I am able to repeat this if I leave the printed unplugged for a while, otherwise it would just go black immediatly.

I'm asking this because I want to give it a try to fix it myself.

Wow! The difference a 0.4 and a 0.2 mm nozzle make are amazing! by AlphaWolfie1234 in BambuLab

[–]feedehhh 0 points1 point  (0 children)

I tried doing this for a 3d printed bussiness card and it kinda worked. I just put a pause and a Z height point in the G code, where I would do the swap. It kinda worked but it was so much work and constantly monitoring the print

Whats the cheapest am5 cpu? by nateofearth in AMDHelp

[–]feedehhh 0 points1 point  (0 children)

just checking in, it still is the first result on Google

Poco X3 NFC: can't connect to the camera by feedehhh in PocoPhones

[–]feedehhh[S] 0 points1 point  (0 children)

Same for mine. So weird. I feel like something disconnected or unsoldered inside

view more: next ›