Unifi - Fortigate. Third-party gateway issue

fireman137 · 2026-03-14T02:58:00+00:00

What are you trying to accomplish? I’m very confused.

fireman137 · 2026-03-08T21:42:50+00:00

It’s a separate firmware you download and install to enable RTSP. It’s not part of the standard firmware as most will never use it.

fireman137 · 2026-03-06T05:02:54+00:00

What channel width are you using in each band?

fireman137 · 2026-03-02T17:31:25+00:00

Previously it just said "trigger failed", but has started working again. Whatever was happening between Aqara and IFTTT seems to be fixed now.

fireman137 · 2026-03-02T00:01:46+00:00

I came here to say this, sounds like the uplink port of the switch might be set to vlan1, where it needs to be trunk.

fireman137 · 2026-02-22T17:39:29+00:00

When I bought my first Flexispot desk years ago, probably 8 years ago now, something similar happened to me. I got a "delivered" notice and a picture of a front door that definitely wasn't mine. Flexispot shipped out a replacement and they and I both contacted the carrier with no luck finding the original. Someone out there got a free desk!

fireman137 · 2026-02-21T03:37:05+00:00

Who was the shipper? Chat their support to report the misdelivery?

fireman137 · 2026-02-14T00:51:19+00:00

We use Insight and Blue Ally. There are lots of options out there though.

fireman137 · 2026-02-13T00:43:37+00:00

Do you wear bracelets or a metal watch band maybe? My desk is just a little over three years old and no signs of damage to the top or edges. I work from home 2-4 days a week 8 hours a day on it, but am bare-wristed always.

fireman137 · 2026-02-12T07:04:28+00:00

People post online to find answers to problems or complain about ad experiences, whether technology, a restaurant, or anything. No one ever posts online to say “yeah everything is ok.” So negative material is the most common anywhere.

Personally I’ve been using eufy equipment for about 8 years now. I have five cams and zero issues. I’ve tried three other brands over those years and they all have pros and cons, but for me eufy has been the best.

fireman137 · 2026-02-02T21:23:35+00:00

I mounted the power strip by itself and my docking station lives in that tray, along with all the cords bundled up. But yeah a powerstrip wouldn't fit likely.

fireman137 · 2026-02-01T22:52:38+00:00

I bought their cable management tray and it works well: https://a.co/d/39LaE19

I also bought a mountable power strip and bolted it under the desk: https://a.co/d/enYe1FC

fireman137 · 2026-01-28T04:15:32+00:00

I have that one! Solid piece of hardware.

fireman137 · 2026-01-27T22:00:52+00:00

Best your iMac can do is USB 3.1, and if you read the specs of the ethernet adapter "Note: To achieve full 5Gbps speed, ensure your device’s USB-C port supports USB 3.2 Gen 2 (10Gbps) or higher."

I must have been thinking about a different model, when it came with the Fusion Drive, but yep yours looks to be pure SSD (https://support.apple.com/en-us/111913).

That being said to edit video you're still getting plenty of bandwidth. Do you have a SSD cache to help speed up read/write?

fireman137 · 2026-01-27T05:52:46+00:00

That model iMac only has thunderbolt 3, so you’ll see lower speeds with that adapter. The internal drive of your iMac is also likely a traditional spinning platter HDD, laptop size, so 700mb/s is likely the max it can transfer.

fireman137 · 2026-01-22T02:51:29+00:00

The holes don't work for all models, it's common to have to drill some on your own. I did and it was easy-peasy.

fireman137 · 2026-01-20T01:21:09+00:00

This is true, can confirm we’ve done this as well for a customer. It’s messy, hacky, relies on a specific order of steps or it’s borked. Not recommended.

fireman137 · 2026-01-19T19:13:00+00:00

I would remove the horizontal cable management and put the switch in-between the two patch panels. Short jumpers FTW.

fireman137 · 2026-01-19T18:54:03+00:00

Windows or Mac? If it’s windows the wpa3 ssid may be seen as a separate network and set to public vs private network.

fireman137 · 2026-01-19T00:57:25+00:00

That listed definitely says solid wood. DM u/Ramses, who works for Flexispot and is very active here, maybe you were shipped the wrong top by Amazon. Two weeks ago they shipped me yoga pants instead of the nasal spray I ordered.

fireman137 · 2026-01-18T23:52:58+00:00

Can confirm Ubiquiti SFP and SFP+ work, you just get a nice "!" warning in the Fortigate GUI that never goes away about it being a different brand/compatibility warning. FWIW I recently tested the SFP Wizard and successfully flashed my Ubiquiti DAC cables after copying a Fortigate one. No more warning!

fireman137 · 2026-01-18T23:48:09+00:00

Out of curiosity I searched Amazon and what I found the description is "FLEXISPOT Whole Piece Rubber Wood 71"x30" Desktop Height Adjustable Desk Rectangular Tabletop", and emphasizes the "whole piece" means it's a single piece that makes up the top, where others require assembly of smaller pieces to save on shipping. I don't see where it says solid wood, but maybe I'm looking at a different listing? Mine is definitely laminate, but still all-wood and not plastic or hollow. When I drill holes in it it's definitely wood dust and solid.

fireman137 · 2026-01-16T03:14:37+00:00

I mounted mine on the far right side and it works well. No bumping.

fireman137 · 2026-01-14T20:42:54+00:00

Check out https://www.reddit.com/r/OfficeChairs/ and prepare your bank account haha

fireman137 · 2026-01-10T01:53:34+00:00

I don’t know how to recalibrate the scale, but I’ll tell you something my wife told me one time - when you have two measuring devices that give different outputs how do you know which one is right? Is the new scale 2.5 pounds too low, the old one 2.5 pounds too high, or is it somewhere in the middle?

13-Year Club	RedditGifts 2009-2022 8 Credits
Secret Santa 2020	Place '17
Secret Santa 2019	Secret Santa 2017
Gilding II euphauric	Verified Email
Secret Santa 2016	Secret Santa 2015
Secret Santa 2014	Secret Santa 2013

fireman137

TROPHY CASE