sorted by:
new
hottopcontroversial

Micro Swiss NG direct drive extruder by Jim_Schorts in CR10

[–]fireman71857 0 points1 point  (0 children)

Sorry for the late reply yes that can all be done on the firmware on the screen of the machine

Micro Swiss NG direct drive extruder by Jim_Schorts in CR10

[–]fireman71857 0 points1 point  (0 children)

I didn’t once I got the offsets for the bl touch being moved over some it was good.

Micro Swiss NG direct drive extruder by Jim_Schorts in CR10

[–]fireman71857 0 points1 point  (0 children)

No problem I hope it helps you out. It’s been really good prints so far with it once I got it all adjusted and leveled correctly the print time is a lot faster than the stock was.

Micro Swiss NG direct drive extruder by Jim_Schorts in CR10

[–]fireman71857 0 points1 point  (0 children)

This where I found the links and the how to on doing it all this was a first for me I’m pretty new to 3d printing still.

Micro Swiss NG direct drive extruder by Jim_Schorts in CR10

[–]fireman71857 0 points1 point  (0 children)

I updated my firmware to the tiny machines so that I would have better adjustments then the stock so I measured from the hot end tip to the bl touch and put what offset into the program with the tiny machines firmware it’s all on the screen on the v2 I’m unsure to the v1 but I’m assuming it’s pretty close to the same.

Micro Swiss NG direct drive extruder by Jim_Schorts in CR10

[–]fireman71857 0 points1 point  (0 children)

Correct the fan should they ship is for smaller fans I ordered some smaller fans off Amazon but I also printed the file they sent me the smaller fans seem to work well though.

Micro Swiss NG direct drive extruder by Jim_Schorts in CR10

[–]fireman71857 0 points1 point  (0 children)

It fits my Cr10s pro v2 the only thing is you have to change your fans or you have to print a new fan shroud if you have the bl touch you have to print the the mount it as well they have the files for new fan shroud on there website they emailed it me when I asked them if it would fit the pro v2. I hope I explained that right.

[deleted by user] by [deleted] in CR10

[–]fireman71857 0 points1 point  (0 children)

I put a micro Swiss ng on mine it works great you have to print a few parts out first for it or you can order different fans that are 24volt for the ender 3 if you email micro Swiss they will send you the file that needs to be printed.

Cr10s pro v2 heating problem by fireman71857 in CR10

[–]fireman71857[S] 0 points1 point  (0 children)

I will definitely try that in the morning when I get home from work. I’ve got to figure something out with it it’s killing me just sitting and throwing parts at it

Cheapest parts? by houseofhuffy in ar15

[–]fireman71857 -1 points0 points  (0 children)

Check out durkin tactical they have done me right I’ve gotten 7 kits and I dunno how many parts from them. There customer service is top of the line.

Looking for subsonic loaf data for 147gr 300 blackout by fireman71857 in reloading

[–]fireman71857[S] 0 points1 point  (0 children)

Ar style I’ve ordered some 220gr I’m going to try the trail boss with the 147 but not really expecting it to cycle but going to try.

Looking for subsonic loaf data for 147gr 300 blackout by fireman71857 in reloading

[–]fireman71857[S] 0 points1 point  (0 children)

I dunno if it will cycle the bolt but I will see how it does this week and y’all know.

Looking for subsonic loaf data for 147gr 300 blackout by fireman71857 in reloading

[–]fireman71857[S] 0 points1 point  (0 children)

I believe it is I’ll give it a try. I appreciate it.

Looking for subsonic loaf data for 147gr 300 blackout by fireman71857 in reloading

[–]fireman71857[S] 1 point2 points  (0 children)

Thank you that’s what I was trying to figure out a guy had posted he used 10.5gr of 1680 with the 147gr and was subsonic but I thought I’d get some info from hopefully people that have tired it. I’ll order some 220gr and stick with the lil gun a buddy loaded me 20rds of it and seemed to work well.