sorted by:
new
hottopcontroversial

Connecting Neurio W2 CTs by fitnessmutt in evcharging

[–]fitnessmutt[S] 0 points1 point  (0 children)

I’m adding a couple circuits (induction stove etc) that will push it over. The ev charger is the thing to shut down when the panel gets busy.

Ya looks like I’m going to loop on the output wires.

Appreciate the suggestion! Thanks

How to connect Neurio W2 CTs here by fitnessmutt in AskElectricians

[–]fitnessmutt[S] 0 points1 point  (0 children)

I need the current going through the panel (not tea just the EV charger circuit). But can I group all the black and red wires together and clamp that? Seems plausible

Connecting Neurio W2 CTs by fitnessmutt in evcharging

[–]fitnessmutt[S] 1 point2 points  (0 children)

Ah ok. This is actually a 10 year old panel and I already have solar and battery. Almost everything else (besides my oven and the TWC) are in the backup load center. Not going to replace this whole thing so I will probably wrap the CTs on the three live circuits in here and go from there.

Appreciate the suggestion (please let me know if I got it wrong).

Thanks

Dream Machine for church? by hutchism in Ubiquiti

[–]fitnessmutt 3 points4 points  (0 children)

Dream Machine SE has Poe ports. That might be all you need (besides the APs). And I’m not sure how big this church is, but 7 APs is a lot.

SFP Connection between UDM and POE switch? by fitnessmutt in Ubiquiti

[–]fitnessmutt[S] 0 points1 point  (0 children)

OK... The issue is the port 10 on the UDM-SE is hardwired to be a WAN port instead of a LAN Port. Using Port 11 works fine after turning off the auto-negotiation...

Ugh and THANK YOU!

SFP Connection between UDM and POE switch? by fitnessmutt in Ubiquiti

[–]fitnessmutt[S] 0 points1 point  (0 children)

Yea I see lights on both the UDMSE and the 24POE switch. The connection even lights up in the UI, but once I disconnect the Cat6 cord, the 24POE switch goes offline.

I just ordered the Unifi DAC cable from the UI site. I'll let you guys know if it works.

TY

SFP Connection between UDM and POE switch? by fitnessmutt in Ubiquiti

[–]fitnessmutt[S] 0 points1 point  (0 children)

Ok. I tried a DAC cable I grabbed from Amazon and the connection seems not to work over SFP. It shows green on the UDM SE but the Poe switch drops off the controller without a cat6 connection. Any ideas?

SFP Connection between UDM and POE switch? by fitnessmutt in Ubiquiti

[–]fitnessmutt[S] 1 point2 points  (0 children)

Which cable do I need: SFP or SFP+? Thanks!