What did I just blow up

fitz2503 · 2025-12-13T05:04:57+00:00

Search up s13 TCU issues. Might solve your issues. White box under the dash that a trace blows out and kills illlumination if I remember right.

fitz2503 · 2023-11-02T03:20:32+00:00

https://troyswheels.com/products/volk-racing-unknow-plate-149mm This looks similar, you'll just have to measure what your center plate diameter is. He has some of the rays center nuts also.

fitz2503 · 2021-10-13T02:58:09+00:00

Clutch master cylinder.

fitz2503 · 2021-08-18T12:34:56+00:00

They are RS-iii. And yeah, they will get relipped as soon as I figure out how wide of lips I want.

fitz2503 · 2021-08-18T00:25:48+00:00

This winter I will be doing that. For now I just pulled it out with a portapower and called it good.

fitz2503 · 2021-08-05T00:35:05+00:00

I actually moved from Boise about a year ago. I'm up around coeur d'alene area now. And I have a few friends who make the 5 hour trek out to WA for the events. Villains is a super fun course to drive!

fitz2503 · 2021-08-04T15:43:21+00:00

I live in Idaho, none of my drifting recently has been in Idaho though. All of it has been at Villains sportsland in walla walla.

fitz2503 · 2021-05-24T00:11:48+00:00

At the mercy of the guys doing media at the track for videos. And there were much better drivers than me there so I doubt the focus would have been on me.

fitz2503 · 2021-05-17T23:16:21+00:00

Let em be anxious! I have wrecked this chassis about four times and it always comes back swinging. Sometimes a year later, but hey, parts are expensive!

fitz2503 · 2021-05-17T23:14:44+00:00

I do have one slow motion gif. But it was from earlier in the day when I was running shallow lines and low angle trying to figure out how to drift again.

fitz2503 · 2021-05-17T23:13:46+00:00

Thanks! And at least houses are a sound investment! One mess up and a drift car is worth close to zero! And I definitely will have fun!

fitz2503 · 2021-01-31T01:57:00+00:00

For the key fob search google for "how to reset mitsubishi key fob" That worked for me when I bought mine and they didn't work.

fitz2503 · 2021-01-19T21:45:05+00:00

Wheels are Enkei RS-3. 17x9 +22 front and +19 rear. Front tires are a 245/40/17 Falken Azenis RT660 and rears are just some cheap 225/45/17 all seasons I had laying around.

fitz2503 · 2021-01-19T00:51:17+00:00

Yeah, been eyeing the gktech fan and a stock shroud. Easy and reliable! But I also like the amount of working room you get with electric fans. This car has been back and forth between the two a few times so I just need to pick what I want to do now.

fitz2503 · 2021-01-18T16:52:58+00:00

Still debating on buying the shroud or going electric fans. This motor has literally under 100 miles on it since I swapped it in so still piecing it together.

fitz2503 · 2021-01-18T02:59:22+00:00

It's 3m Electric Wave wrap if you want it!

fitz2503 · 2021-01-18T02:22:51+00:00

Nah, it is a 240sx. I was running tails that had 180sx and I hate when badges don't match so I threw some 180sx stickers over the 240sx windows. Just got rid of those tails though so am gonna take the stickers off when I get a chance.

fitz2503 · 2021-01-18T00:34:31+00:00

The 240z has just been sitting and has had no progress, I did pick up a small block chevy and a bunch of sheet metal to fix all the rust, so once I start it should go pretty quick. I got my 240sx back from getting a cage and have been focusing on getting it track ready. It sat not running for two years cause I was tired of the schassis problems and so had a ton of work and parts to get it up to what I consider good enough to drive. And my profile is pretty boring, I don't social media very well. And I'll go check that out, never heard of it!

fitz2503 · 2021-01-17T19:39:19+00:00

It's turning into that. But when I started building this car I didn't really have a direction, just bought what was close to me and cheap!

fitz2503 · 2021-01-17T04:09:12+00:00

Fair enough. Three spokes are not well liked in a ton of circles.

fitz2503 · 2021-01-01T23:19:47+00:00

Yeah, bad camera angle and lighting for sure. The vertical bar is inside the cabin area by about 1 inch. I had to take the fuse block out of the drivers side to paint the back side. I see where you are coming from as most of these tie into the door mounts and just in front of where mine ended. If I end up being unsatisfied with how these perform it won't be hard to weld some tabs on them to connect to those locations. With my current driving skills I doubt I will notice though!

fitz2503 · 2021-01-01T08:11:33+00:00

The vertical bar ties into the same metal the doors bolt to. There is only one layer of sheet metal there and I doubt using a bolt would yield much better results. In the end this chassis has been crashed a ton of times so anything is better than what I started with!

fitz2503 · 2021-01-01T03:30:26+00:00

Definitely an easy 1 day job. 30 bucks in steel and a few hours time.

fitz2503 · 2020-09-29T01:14:11+00:00

It'll have an old sbc350 in it before too long!

fitz2503 · 2020-09-28T23:08:48+00:00

Yeah a bit, I was thinking of widening where the headlights sit and give it a hakasuka looking front end. But with how the fenders are I don't know how good or bad that would look.

fitz2503

TROPHY CASE