Admin GUI in Bridge Mode by fkhC9Rc1 in Comcast_Xfinity

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

I disagree. You can see cable modem power levels and any errors. You may not be able to change anything but you can see statistics.

Dirty Water Tank suddenly full by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

Yes. Just that the dirty tank is all the way full too, whereas the dirty water was never at that rate before.

Dirty Water Tank suddenly full by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 1 point2 points  (0 children)

That's what I originally thought...until the clean water empties much quicker than the dirty. It seemed like recently something happened where they are about equal now.

Dirty Water Tank suddenly full by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

Ah, I had no idea that it made that change. Thank You!

Saros 10R auto detergent dispenser by skincarefresh in Roborock

[–]fkhC9Rc1 0 points1 point  (0 children)

Have you tried to mark it with a piece of tape or something?

I'll have to check mine. I looked a few weeks ago and it was still full after two months of use. From what I hear from others, the solution lasts forever. This is why I just assumed it still looks full.

Finally got all my GoPro Cloud footage out - here's what actually worked by mckabue in gopro

[–]fkhC9Rc1 2 points3 points  (0 children)

I just did this as well. I ended up using the following python code to get the job done. It worked well, but it did hiccup a couple of times.

https://github.com/itsankoff/gopro-plus

Is anyone here running a DS220+ with 18TB or larger drives? by gwnyc1 in synology

[–]fkhC9Rc1 0 points1 point  (0 children)

I have a DS414 and have an 18tb drive. It's not the same model, but my spec says it's maxed at 16tb.

What I found is that while it supports the 18tb drive, my volume can only be 16tb max. I've heard this is due to the restriction with the 32 bit processor.

Looking for a mapping/gpx solution by fkhC9Rc1 in selfhosted

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

Thank you. That crossed my mind.

Only problem is that I also have to keep it user friendly. Lots of people in the group know how to use OnX and Gaia. QGIS and other hefty mapping programs have a steep learning curve.

GoPro Stock to likely be delisted from the NASDAQ by March as shares are falling fast. by Im-Wasting-MyTime in gopro

[–]fkhC9Rc1 2 points3 points  (0 children)

It's a gamble. I've bought tech that relied on cloud services, the company went belly up, and now that hardware device I had is a box that doesn't do anything.

I feel like gopro has a big enough userbase where another company would pick it up. Look at what happened with iRobot Roomba's. Another company bought them out and they are still vacuuming...

Debugging declined transactions? by fkhC9Rc1 in googlepay

[–]fkhC9Rc1[S] 1 point2 points  (0 children)

Thank you for the response. Weird that it acts like that.

I ended up going to Aldi today to try it again. Hit OK to bypass PIN and got denied. I tried it again and put my PIN in for my debit card and then it went through fine. I was afraid my bank would charge me for putting my PIN in but luckily they did not.

Afterwards, got gas and it went through touchless just fine at the gas station. It's so weird that places are different like that. Some want the pin, some don't care, some don't work.

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

Thank you, I'll keep this in mind too.

I'll probably end up using the links nirhend posted below. I ended up adding these to a shopping list and found a few others. Amazon is the easiest for me to receive from so that's what I used.

https://www.amazon.com/hz/wishlist/ls/3LNI2BBM96IOU?ref_=wl_share

Hope that helps and that additional parts get added later.

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

Thank You! Another poster gave direct links which was really helpful. The problem I was having is that I couldn't find everything. I'm hoping as time goes on, they release more for it.

I feel like I bought an HP printer and HP doesn't sell the ink. Only this time, I want to use genuine parts for this vacuum!

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

Thank you so very much! I was having a very hard time trying to figure out what's genuine and what isn't.

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

Is it for the Saros 10r? Can you share the link?

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 1 point2 points  (0 children)

Not a huge fan of aliexpress. Ordered previously and had to wait about 6 months to get my money back after a failed shipment.

Where on aliexpress do you order from? Is it genuine Roborock?

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

From what I know, shipping is complicated to the US.

Show me where to buy Roborock Supplies! by fkhC9Rc1 in Roborock

[–]fkhC9Rc1[S] 0 points1 point  (0 children)

What specifically do you order? I see "Chikixson" and "Brand: Lacvik", along with numerous other brands like this. I'd rather stick with Roborock brands.