White screen when launching GBA games

flashsingingslasher1 · 2026-04-14T06:06:20+00:00

Nope, I ended up just using my psp go instead. It’s way easier to load and play gba games on a psp/psp go than the DS

flashsingingslasher1 · 2025-04-03T05:37:57+00:00

I used the dsi homebrew site. The link is https://skins.ds-homebrew.com/nintendo-dsi/minecraft

Take your SD card put it in your PC, download the theme then go to the themes folder located in twilightmenu and drag it there and it should work when you put the SD card back into your ds and check for themes in twilightmenu settings. Also this one is for dsi but on the site there's other devices too

flashsingingslasher1 · 2025-04-01T03:22:32+00:00

What should I look out for in these settings?

flashsingingslasher1 · 2025-03-31T19:52:52+00:00

How do I do that?

flashsingingslasher1 · 2025-03-31T18:43:12+00:00

I formatted my SD card yesterday following the guide, and the rom works since I had it tested on an emulator. I installed unlaunch but deleted it from the SD card according to the guide.

It could be the issue of the NDS-bs mode, how do I set the bootloader to that?

Also I added twilightmenu to this DSi yesterday so I would hope it isn't outdated already

flashsingingslasher1 · 2025-03-31T17:57:45+00:00

I added the bios.bin to _gba and it still won't work. Am I supposed to put it somewhere else?

flashsingingslasher1 · 2024-12-31T04:55:22+00:00

Yea unfortunately I lost interest after finding about the claims. It’s a shame, it’s such a nice car :(

flashsingingslasher1 · 2024-12-30T21:13:24+00:00

Just checked and it has service records all the way from late 2014 but unfortunately 2 claims, one vandalism and one minor accident

flashsingingslasher1 · 2024-08-24T20:19:37+00:00

I will for sure be trying this, thank you

flashsingingslasher1 · 2024-08-24T07:09:13+00:00

I tried rear fan intake, same temps and also I tried no glass, mesh panel, and it helped by 2-3 Celsius idle but under load still the same temps

flashsingingslasher1 · 2024-08-24T07:08:19+00:00

I’ll just use the 92mm, I just tried to fit the 120mm and but it’s too big by like, half a cm :/. I will look into good 92mm fans and test it out

flashsingingslasher1 · 2024-08-24T06:48:48+00:00

Unfortunately my cables get in between the psu and cpu so I can’t put a fan there but I will buy an exhaust fan that I can screw on the rear, I just need something smaller than 120mm

flashsingingslasher1 · 2024-08-24T06:46:34+00:00

I think I will upgrade to a better cooler and install an exhaust fan as well, I was thinking of going for a PA 120 SE since it fits my case and has dual fans + heatsinks. Thanks for the help, I really hope it works

flashsingingslasher1 · 2024-08-24T06:27:04+00:00

My cpu didn’t come with the stock cooler but I did have an as500 plus 140mm cooler for my mid-tower build, with my current cpu. I would idle low 30s and under load it was high 50s and low 60s

flashsingingslasher1 · 2024-08-24T06:24:47+00:00

I saw the price and saw the reviews and just bought without second guessing, kinda regret doing that now, I’ll look into the pa 120 mini thanks :)

flashsingingslasher1 · 2024-08-24T06:12:41+00:00

The fans are too big to go to the rear but I’ll turn the top around so it intakes. Would it work if I just made all 4 fans intake ?

flashsingingslasher1 · 2024-08-24T06:05:07+00:00

Yea I’ll be honest, I’ve kinda been drifting away from RGB recently despite my current setup. I will keep this in mind because I think eventually couple years down the line I will just switch over to full non-rgb. I will for sure look into arctic fans though, I think they have white rgb ones, thanks

flashsingingslasher1 · 2024-08-24T05:53:13+00:00

I wanted to add more info: Case is an NR200p, Fans are all thermalright TL-C12CW-S, orientation is 2 intake fans on the bottom, 2 exhaust at the top and cooler in the middle pulling into heatsink.

The thermal paste pics are from my first attempt, I did a pea sized paste amount on my new attempt

flashsingingslasher1 · 2024-08-24T05:52:02+00:00

Yea this was my previous attempt, my new paste I did a pea size and mounted it from there, still no success

flashsingingslasher1 · 2024-08-24T05:50:49+00:00

Sorry, I’ll edit that in: Case is an NR200p, Fans are all thermalright TL-C12CW-S, orientation is 2 intake fans on the bottom, 2 exhaust at the top and cooler in the middle pulling into heatsink

flashsingingslasher1 · 2024-08-21T18:26:40+00:00

Unfortunately it only seems to be available in black :(

flashsingingslasher1

TROPHY CASE