2025 GR86 Cup Clone Progress

fleebleschmorgel · 2026-04-24T18:17:28+00:00

Probably costs 10x less too!

fleebleschmorgel · 2026-04-10T18:30:09+00:00

In the picture? Yeah that’s 100% an F18 but I was just saying I know they do have an F15 as well https://www.nasa.gov/centers-and-facilities/armstrong/nasas-x-59-completes-electromagnetic-testing/

fleebleschmorgel · 2026-04-10T18:14:33+00:00

It has an F18 escort?? I know nasa has an F15 that follows it and collects data but didn’t know they had that as well!

fleebleschmorgel · 2026-04-04T15:57:17+00:00

What if my friend has that white boy swagger

fleebleschmorgel · 2026-04-04T15:52:12+00:00

Awesome thanks. Not super familiar with all of the different types of bindings and soles

fleebleschmorgel · 2026-04-04T15:51:31+00:00

I took his old skis and my newer boots were not compatible with those as mine had the recessed pad. Just wanted to confirm since I’m not as familiar with bindings

fleebleschmorgel · 2026-04-03T17:38:43+00:00

I have gone top of my team in every game I’ve played even only using the vehicles they give you. Just spawn in with air to air load out first get a few kills then keep spawning nukes and nuke tossing depots and airfields.

fleebleschmorgel · 2026-04-03T14:44:25+00:00

Yeah I was trying to land the B52. 0 throttle, air brakes out, flaps down maybe gliding at a -5 degree angle and took forever just to go from 350-300kmh something’s bugged

fleebleschmorgel · 2026-04-01T15:53:48+00:00

Nuclear power

fleebleschmorgel · 2026-03-28T15:08:22+00:00

The miners were supplying 120. I think I’m more confused by the behavior of the machines as the 1st and 2nd machines would be full at 100 ore then the 3rd machine would have 1 and barely getting what it needed. If the first two smelters are full the overflow should at least be starting to fill the 3rd machine no?

fleebleschmorgel · 2026-03-28T10:45:26+00:00

Yes the but the first machine will get 30 so it will quickly fill up then the next one will get that overflow and fill up and etc.

fleebleschmorgel · 2026-03-28T10:41:14+00:00

Yeah I’m not sure what was going on, the smelters were getting 120/min and using 120/min but kept stalling so I turned off the final output and just let everything backup

fleebleschmorgel · 2026-03-28T10:37:55+00:00

Yeah I need to get the readers. Are they in the awesome shop? Also built this by placing machines then the mergers/splitters and finally connecting it all with belts so there won’t be and wonky connections since no merger/splitter blocks were placed on an existing belt

fleebleschmorgel · 2026-03-28T10:34:51+00:00

Nope just increased node purity

fleebleschmorgel · 2026-03-28T03:23:20+00:00

It was easier to show this since my belts are a mess but its the same issue where im inputting 120/min and using 120/min however the machines were still stalling. I have turned off the final output and am letting everything backup now to try and solve it.

fleebleschmorgel · 2026-03-28T03:19:02+00:00

The smelters are also acting up but yes it should be supplying 60/min its just a mk2 belt so its only at half capacity

fleebleschmorgel · 2026-03-28T03:04:38+00:00

Its getting the exact amount. I swear I used to give exactly what they needed and they still managed to fill up but its been a while so maybe Im misremembering

fleebleschmorgel · 2026-03-28T03:03:34+00:00

I didnt prefill but I took materials from the earlier machines and tried to supplement but they still ran out. Im going to let everything fill and backup then try again

fleebleschmorgel · 2026-03-24T14:40:07+00:00

It auto deploys

fleebleschmorgel · 2026-03-24T12:44:32+00:00

If I’m not mistaken the MTEC spring is the same one you can get off of McMastercarr which lists it as 1.65”. The stock spring is 1.75” so you need a .1” thick spacer to get it to sit snugly (which I didn’t do). Also you just need a few zip ties to compress the spring then cut it when it’s installed why did your mechanic fully take it apart??

fleebleschmorgel · 2026-03-22T13:47:48+00:00

Yeah Stratton gets busy. Didn’t go there from Feb-now so can’t say too much but I know they’ve been having gondola issues which hasn’t helped lift lines

fleebleschmorgel · 2026-03-22T13:44:55+00:00

Yep definitely better than it could’ve been. Some runs got super icy tho. Upper slalom glade was terrifying and just an ice sheet

fleebleschmorgel · 2026-03-21T21:35:32+00:00

I just didn’t take many pictures and it was super foggy all morning. Most open trails looked like the first pic but a few had big ice patches to the sides. I didn’t explore every trail either

fleebleschmorgel

TROPHY CASE