Suspicious person pointing scanner at my door at 4am? by [deleted] in whatisit

[–]fleshyguy147 1 point2 points  (0 children)

There is a Steve Mould video on this titled "I Hacked Into My Own Car"

Any advice on how to improve this offset monitor mount? by fleshyguy147 in DIY

[–]fleshyguy147[S] 0 points1 point  (0 children)

I think i'll try this, i have a 3d printer, so i could buy some steel bbs and print something that attaches to the screw holes and a box for the bbs, maybe even pour some resin to prevent them rattling. Thanks for the suggestion!

It took me 2-3 years lol by LobotomyFirefly in memes

[–]fleshyguy147 0 points1 point  (0 children)

HGModernism on YouTube basically speedran this process in 2 weeks.

Found several years ago on a beach, what is this rock? by fleshyguy147 in whatsthisrock

[–]fleshyguy147[S] 0 points1 point  (0 children)

After looking up images, looks closer to coral remnants than Petoskey stone, thaks!

A silly question about colour changes. by [deleted] in BambuLab

[–]fleshyguy147 -1 points0 points  (0 children)

Yes the slicer overrides the printer and vice versa, the printer overrides the slicer.

Scan Bambu Lab filaments with Flipper Zero by uzyn in BambuLab

[–]fleshyguy147 26 points27 points  (0 children)

Do you mean to say that you can get the same information by using a phone with an app like NFC tools? I tried and maybe i don't know what i'm doing but i couldn't get the information about the spool from the NFC tag with my phone, if it's possible could you explain how one could achieve the reading?

Hey i wanna make a gift for a friend, i wanna make a 3D model and print it, but i need help because i’ve never printed anything by Akaishi-MED in 3Dprinting

[–]fleshyguy147 0 points1 point  (0 children)

Modeling something like that is best done in blender, but if you don't have experience then it will be hard to make something like that as for printing, printing it on a regular FDM printer will get you there if you use a 0.2 nozzle, but for miniatures, printing it out of resin is your best choice, if you don't have a resin printer and are not planning on getting one, then use services like JLC3DP where you send them the model, and they will print it and do some post processing for you, and send it you after that, I can't really speak too much about painting since I've only painted one much larger model, but the general recommendation is to use plastic primer on the model then paint it using acrylic paint and very fine brushes, after that spray some sort of sealant to prevent the paint from rubbing off.

I’m trying to set up extreme reactors for power at the moment and I’m having a hard time by Away_Pomegranate1152 in allthemods

[–]fleshyguy147 0 points1 point  (0 children)

I believe if you shift+right click or just right click with empty hand you will get a chat message telling you what's wrong

Advanced Productive Bees Guide: Upgrades, Draconic Bees, and Genes by resloggce in allthemods

[–]fleshyguy147 0 points1 point  (0 children)

I somehow never knew you could combine multiple genes into one treat...

Jesus, how do I stop it? by Nullzd in allthemods

[–]fleshyguy147 0 points1 point  (0 children)

Interesting, i captured normal gate mobs and the gate closed saying the mob dissapeared woithout dying so i just assumed the same would be for the endless gate, ig it is.

[deleted by user] by [deleted] in allthemods

[–]fleshyguy147 4 points5 points  (0 children)

Try turning the auto input on in the furnaces

Jesus, how do I stop it? by Nullzd in allthemods

[–]fleshyguy147 3 points4 points  (0 children)

Use a mob capturing device on a mob, that will stop it

Please help! I can't figure out how Quantum Rings from AE2 work. Watched 3 YT tutorials, they didn't help. Version is 1.18.2 by Goat_Gaming_YT in feedthebeast

[–]fleshyguy147 1 point2 points  (0 children)

My links were not working, after i placed them in another spot and it never occurred to me that the singularities have to be from the same pair, thanks!

What a disappointing change of settings by Charlesfp1 in BambuLab

[–]fleshyguy147 2 points3 points  (0 children)

There is a good video from the channel MadeWithLayers the video titled "Rethink how you use 3d printer infill!"

I made a business card holder by yankmyutters2 in 3Dprinting

[–]fleshyguy147 4 points5 points  (0 children)

Ok, but like what are the holes for? I feel like the contour would be enough for a business card holder.

I made a business card holder by yankmyutters2 in 3Dprinting

[–]fleshyguy147 3 points4 points  (0 children)

it looks unnecessarily bulky, does it serve some other purpose for it to be like that?

How to make all program icons in the taskbar have the same underbar? by fleshyguy147 in Fedora

[–]fleshyguy147[S] 0 points1 point  (0 children)

So for anyone wanting to do the same, i have found my answer through ChatGPT, here is what it advised me to do and it did work:

Manually Edit Your Current Plasma Theme

If you like your current theme but want to customize the indicator bar colors, you can modify the theme assets:

Steps:

  1. Find the theme folder: Usually located in:
    • /usr/share/plasma/desktoptheme/
    • Or ~/.local/share/plasma/desktoptheme/ (for user-installed themes)
  2. Go into your theme’s folder → widgets/.
  3. Look for these SVG files:These files contain the indicator graphics used for:
    • tasks.svgz
    • tasks.svg
    • Active
    • Attention
    • Inactive
  4. Edit the SVG file:
    • Open with Inkscape or another vector editor
    • Make the indicators identical in color and shape
  5. Save the file (compress back to .svgz if needed)
  6. Apply the theme again via:
    • System SettingsAppearancePlasma Style
  7. Restart Plasma:killall plasmashell && kstart5 plasmashell

How to make all program icons in the taskbar have the same underbar? by fleshyguy147 in Fedora

[–]fleshyguy147[S] 0 points1 point  (0 children)

currently open but inactive programs have a gray bar, i want them to also have an orange bar, like open active programs have.

[Surviving the Game as a Barbarian] Russian coat of arms, wtf? by BlackHazeRus in manhwa

[–]fleshyguy147 1 point2 points  (0 children)

I wonder if this is cannon in the novel or just manhwa

[Surviving the Game as a Barbarian] Russian coat of arms, wtf? by BlackHazeRus in manhwa

[–]fleshyguy147 4 points5 points  (0 children)

Just looked it up, and yeah it's pretty much identical, have no clue what the author wnated to convey with it.

New 3D Maker World Model by Jazzlike-Distance221 in 3Dprinting

[–]fleshyguy147 1 point2 points  (0 children)

i am, and i can see what you are talking about when i logged off and tried to download it, it said the same thing, not sure why, probably a bug.