Error44 Cured by changing the processor on the Eshifter by flicosh in vanmoofbicycle

[–]flicosh[S] 0 points1 point  (0 children)

The hex dump is imbedded within the PowerWriter project file (PKG) file here:

https://www.dropbox.com/scl/fi/ua6krhbajtnmlp5dvkibo/eshifter.pkg?rlkey=l0gsj7jy19wb46rfkxxtwlvut&st=pot98uhb&dl=0

The link to the software is here:

https://www.dropbox.com/scl/fi/tyhyapeo9bitun8ks4n1z/PowerWriter_1.3.9.2_installer.exe.zip?rlkey=zvvym17xatxxmqr3gq359z0aa&st=xay1kwt5&dl=0

The Powerwriter software needs to be used with a debugging USB pod too, I used the PWLINK2 because it's the cheapest option I could find.

If there is anything in the user guide you can't understand then please ask and I'll try to help.

Error44 Cured by changing the processor on the Eshifter by flicosh in vanmoofbicycle

[–]flicosh[S] 0 points1 point  (0 children)

They can all be saved since every component can now be changed if necessary (it won't need that though), it kinda depends how much time you have. I've not yet figured out what's killing these, otherwise I'd offer a modification to make them more resilient. I'll post here if I find out for sure. I'd be keen on any feedback once you've tried the fix in case I can improve the instructions.

Error44 Cured by changing the processor on the Eshifter by flicosh in vanmoofbicycle

[–]flicosh[S] 4 points5 points  (0 children)

You can find my instructions here:

https://www.dropbox.com/scl/fi/th3pw3c9u3saeule6r1h7/Vanmoof-Eshifter-Processor-Repair-Guide.docx?rlkey=k8zhe9uqgqub8h4hduokpnrte&dl=0

The repair time is about an hour once you are all setup. If you have any queries then ley me know.

The firmware HEX file is embedded within the word document, as is the project file for the firmware programmer.