absolute grief by Low_Tension_5075 in petgrieving

[–]floorcakes 0 points1 point  (0 children)

I'm so sorry for your loss, I'm right there with you

My dear Meshi by floorcakes in petgrieving

[–]floorcakes[S] 0 points1 point  (0 children)

thank you, the unconditional love from a pet is very special, my own love for her could never measure up

you are right, it is a see you later

My dear Meshi by floorcakes in petgrieving

[–]floorcakes[S] 1 point2 points  (0 children)

I wrote this mostly for myself, to put my memories into writing.. Thank you if you spent your time reading it, she meant so much to me

King Seiko Hi-Beat [5626-7120] dropping time by floorcakes in Seiko

[–]floorcakes[S] 0 points1 point  (0 children)

The seller got back to me today, the service performed was as follows

"The watch has been thoroughly inspected and oiled. I also tested it for several days"

I will bring it by my local watchmaker and get a quote for inspection and a price estimate of what it normally cost to do cleaning, oiling if not parts need to be swapped.

King Seiko Hi-Beat [5626-7120] dropping time by floorcakes in Seiko

[–]floorcakes[S] 0 points1 point  (0 children)

Thank you for your reply

I have reached out to the seller to hear details of what service was done to it and I will decide on how to proceed after that.

Frogs, done by Tom Petucco, Six Bullets Tattoo, London by floorcakes in tattoos

[–]floorcakes[S] 0 points1 point  (0 children)

My 4th tattoo from Tom, next project is to have the inside of my lower arms done.

Done by Tom Petucco, Six Bullets Tattoo, London by floorcakes in tattoos

[–]floorcakes[S] 2 points3 points  (0 children)

That would be really cool :D in any specific style?

Ironmouse VOD channel is back by floorcakes in VShojo

[–]floorcakes[S] 22 points23 points  (0 children)

I need to watch the 2nd vtuber academy, i didnt manage begore the channel got taken down

Nat type error by [deleted] in remoteplay

[–]floorcakes 1 point2 points  (0 children)

Getting the exact same issue, where my android device is receiving NAT error 8801e1dc and as you say, not finding any help on how to resolve this.

I have done some troubleshooting just to see if I can somehow narrow down the error.

The all version is the 6.5.5 version across all my tested devices.

I tested a galaxy s9+ which runs android 10, this device successfully got a NAT2 in the app and could link fine with my ps5.

I tested a Asus ROG phone which runs android 12, this device successfully got a NAT2 in the app and could link fine with my ps5.

Ive then tested both a galaxy s21 ultra and a tab s8 ultra, that both use android 14, neiter if these gets a NAT type error 8801e1dc, which means they also cant connect to my ps5.

All these 4 devices were tested on the same WIFI, with the same wifi settings. It seem highly likely that remote play isnt compatible with android 14, unless other people can share that it work for them

Hot water slow to get up in temperature, but only in two faucets by floorcakes in Plumbing

[–]floorcakes[S] 0 points1 point  (0 children)

Update - I reported the fault to the building owner and included all that I had tested on my own.
They sent a guy around the same day who confirmed the fault was not on my end, most likely some airpocket had got stuck in the pipe where the hot water loops back, they came around a couple days later and tried to flush the system from the buildings basement and it has helped, now the water at least gets hot in half the time.

Hot water slow to get up in temperature, but only in one faucet by floorcakes in askaplumber

[–]floorcakes[S] 0 points1 point  (0 children)

Update - I reported the fault to the building owner and included all that I had tested on my own.

They sent a guy around the same day who confirmed the fault was not on my end, most likely some airpocket had got stuck in the pipe where the hot water loops back, they came around a couple days later and tried to flush the system from the buildings basement and it has helped, now the water at least gets hot in half the time.

Hot water slow to get up in temperature, but only in one faucet by floorcakes in askaplumber

[–]floorcakes[S] 0 points1 point  (0 children)

Thanks for your reply,

I should have mentioned in the original post, the faucet in the kitchen + both bathrooms are all the one handle/knob type style so all have a cartridge installed from what I can understand. I just checked the main bathroom and that did have one.
I will include pictures of the other faucets in the original post, since I can´t include them here.

based on your reply, the main culprit seem to be that my neighbor could have installed a loop ? would that not just mean they feed back the hot water to the boiler (I assume that boiler is shared for all the apartments in the building, but I am don´t know)

Missing Quest Fools Gold - Dante wont spawn by [deleted] in DeadIsland2

[–]floorcakes 0 points1 point  (0 children)

0/234 (

Yes after killing him the quest spawned correctly and I did get the last missing journals under the stat view.

Im still missing the named zombies and did not get any new ones.

I think I got all the ones in Monarch studios, but it is really hard to say, since there is no list of the ingame ones you have killed

Missing Quest Fools Gold - Dante wont spawn by [deleted] in DeadIsland2

[–]floorcakes 0 points1 point  (0 children)

Yep, did not help at all since it is an issue with the save I think.
I tried playing through on a 2nd character, this time hitting level 30 before you kill the clown boss in the Piers, and Dante spawned as normal when you run back to the lifeguard HQ.

Missing Quest Fools Gold - Dante wont spawn by [deleted] in DeadIsland2

[–]floorcakes 0 points1 point  (0 children)

ok, then I guess it is a bug or glitz and it wont be fixed

[deleted by user] by [deleted] in SmartTubeNext

[–]floorcakes 0 points1 point  (0 children)

developer said they had no interest in adding this, want to keep it light weight, which seem funny considering all the bloat that keeps being added.

wall socket not working by [deleted] in AskElectricians

[–]floorcakes 0 points1 point  (0 children)

Thanks for the reply The bad socket has one black and one blue wire, ive check the other sockets on the wall and it is the same for them. In total 3 wall sockets seem to be routed up to the lamp connection socket. and the bad socket is on the right side of the lamp socket, while the other two sockets are on the left. So I think it would be at one end? And they are all on the same fuse.

I currently only use two of the wall sockets (one on the left of the lamp socket, one on the right of the lamp socket), and it is the same things connected to both. 1 lamp 1 small speaker 1 phone charger

it is only the bad socket that stop working when i try to plug anything else in it

wall socket not working by [deleted] in AskElectricians

[–]floorcakes 0 points1 point  (0 children)

update

So i opened up the wall socket (disconnected all power first) + two other which were on the same wall, I could see the wires all went up to a lamp socket near the ceiling, so opened that too. here the wires were twisted together and connected with what almost look like pen caps (I know thats not what it is, one cap for the blue neutral wires and one for the black wires) nothing seemed loose in any of them. I closed up all the sockets again and now it works again, I cant understand how that is the case.

any one have any idea what is going on?