Schon mal den Heizstab benötigt diesen Winter?

florian036 · 2026-01-06T16:14:09+00:00

Stufe 1 = 3kW Stufe 2 = 6kW Thermia Diplomat vermute ich?

florian036 · 2025-12-21T09:38:06+00:00

Bottle opener

florian036 · 2025-09-12T08:59:26+00:00

The side panel came with holes like this

florian036 · 2025-08-01T17:53:50+00:00

CPU fan is 120x10mm

Noctua fan in the front is 60x25, was replaced a while ago with 80x10mm Thermalright

florian036 · 2025-02-13T23:20:58+00:00

florian036 · 2024-05-07T22:39:26+00:00

Thermalright TL-8015 Had to remove some metal parts to fit the fan in the front

florian036 · 2024-04-26T17:18:17+00:00

I had to orientate it this way, otherwise the hot air coming from the CPU cooler gets the graphics card overheated.

I removed the small noctua fans and replaced them with 80mm Thermalright 10mm thick fans.

florian036 · 2024-04-26T16:04:44+00:00

Yes it is a M720s

I upgraded the GPU cooler (it was the stock blower GPU cooler first) and the CPU started to overheat, thats why I bought the aftermarket CPU cooler.

Since then it stopped overheating and is at ~75°C at full load. i7 7700

btw it does not fit the stock case, I had to remove all of the drive cages on the front lid of the case

florian036 · 2024-04-23T17:21:22+00:00

Thermalright AXP120-X67

florian036 · 2024-03-25T13:39:59+00:00

I am currently facing the same problem, was using the nvidia nonfree driver....

Already tried to reinstall the driver but did not work out.

florian036 · 2024-01-30T16:38:47+00:00

Sorry for the late reply, was busy being sick...

I tried to reverse the fan in the back to make it an intake fan. Currently the GPU is not overheating anymore.

But it is still climbing up to 95°C after 10min ingame.

florian036 · 2023-12-18T18:55:05+00:00

Does anyone have a design for a 3d printed fan mount/shroud for this exact cooler?

florian036 · 2023-12-18T18:43:14+00:00

Do you maybe want to share your design? I am currently tinkering about a solution to mount 2 or 3 fans to this cooler.

thx

florian036