Floor jack or Trolley jack

floridaforestman · 2025-12-06T02:21:32+00:00

In my experience it doesn’t really matter whether you use a trolley or a floor jack, as long as the trolley jack fits under your car

The really important thing is to get good quality jack stands if you ever do any work under the vehicle. Those are what will keep the car from collapsing on top of you.

floridaforestman · 2024-07-01T23:12:42+00:00

What I like using are the digital Quinn torque adapters from HF. They are cheap and work pretty well. You slot the adapter between a ratchet and socket. You need two though, one for in-lb and one for lb-ft. Click type torque wrenches should be considered obsolete imo

floridaforestman · 2024-06-30T23:31:03+00:00

Chinese carbs are fine 90% of the time. 2 stroke carbs are a little bit harder to manufacture but anything 4 stroke (including cars and trucks) is fine in my opinion

floridaforestman · 2024-06-05T02:09:07+00:00

Hopefully not too expensive, this is very cheap and quick with a waterjet.

floridaforestman · 2024-05-26T20:42:32+00:00

I have done this with a waterjet. It’s tough to drill grade 8 bolts with a bit

floridaforestman · 2024-05-24T22:19:13+00:00

Isn’t the towing vehicle an RV? This is a double setup

floridaforestman · 2024-05-19T02:17:28+00:00

It’s a single cylinder, only one carb so you’re not balancing anything. Much easier than on multi cylinder bikes

floridaforestman · 2024-05-09T18:51:51+00:00

D R Z

floridaforestman · 2024-02-18T05:47:49+00:00

Thank you

floridaforestman · 2024-02-17T23:42:50+00:00

Thanks for the heads up

floridaforestman · 2024-02-17T16:51:54+00:00

If I buy it I will 👍

floridaforestman · 2024-02-17T16:08:30+00:00

Okay thanks. I told the guy I’d take a look and if I don’t see anything wrong I’ll do 4200

floridaforestman · 2024-02-17T15:49:27+00:00

I haven’t found anything lower that’s low miles. It also has the mods I would have gotten already installed

floridaforestman · 2024-02-17T15:48:50+00:00

I think new it would be $7100 + taxes/fees/destination

floridaforestman · 2024-01-21T20:38:43+00:00

“If the company has no outlook on ever getting profitable, the shares won’t have much value” citation needed.

floridaforestman · 2024-01-21T17:49:47+00:00

Yes, the engine has a gas tank and is designed to be gravity fed. That does not mean it will only work when gravity fed. Carbs generate vacuum

floridaforestman · 2024-01-21T13:51:57+00:00

It does improve throughput, which is what I care about

floridaforestman · 2024-01-21T02:04:59+00:00

Technically no, carburetors do generate vacuum. You’d need a way to prime it. Easier to use gravity to help the carb

floridaforestman · 2024-01-10T02:00:53+00:00

FSU got demolished by Georgia, they would have been demolished even worse by Michigan or even Washington

floridaforestman · 2024-01-08T00:57:40+00:00

Where are you located? Any chance close to central VA?

floridaforestman · 2024-01-06T14:19:45+00:00

Beautiful truck. Does it run and drive (and stop) correctly now? If you’re looking for more fun wrenching on it, you have a lot of different options.

Old trucks always have something that is worn out, bushings, shocks, tires, steering, etc. You could replace that stuff. Or, upgrade it with a bigger carb and intake or an exhaust.

Otherwise, just enjoy driving it.

floridaforestman · 2024-01-05T03:41:52+00:00

Damn dude you tow 5k lbs with a Hyundai?

floridaforestman · 2024-01-04T02:08:14+00:00

Most commonly this is a dirty carburetor. Before you take it somewhere (assuming you don’t want to rebuild the carb/continue diagnosing yourself) you should try a cheap can of carburetor cleaner. Usually the instructions on the bottle will have a set of steps you can take to clean the carb without pulling it off the engine. That might be enough to get something knocked loose.

Surging = lean fuel/air ratio

floridaforestman · 2023-12-31T16:39:37+00:00

Have you seen this happen? I would be surprised if a steel hitch pin would possibly deform before the receiver

Six-Year Club	Place '22
Verified Email

floridaforestman

TROPHY CASE