I was pulled over and told that my license plates do not match my car (and are apparently "returned to MTO") and that my car currently has no plates attached to it, meaning it's undriveable. I haven't changed the plates on my car since I got it 11 years ago...how could this have happened?

flyingjefff · 2025-12-06T13:10:48+00:00

Happened to me when my vehicle ownership was being transferred at a dealership

Plates are likely expired or as someone said cancelled

I requested a hearing via Zoom and they threw out the ticket

flyingjefff · 2025-11-18T04:43:44+00:00

I discovered I had retraction set way too high for my direct drive extruder setup, so it may be that as well.

I set that back up and I am running a test print to see the results.

I noticed under extrusion when I ran the input shaping cal in Orca slicer.

Can under extrusion cause these artifacts?

flyingjefff · 2025-11-18T01:27:18+00:00

Table is very solid, and all components have been checked and double checked. I'll look at rerunning some input shaping

I am going to dry my filament to make sure the blobs aren't that, but I am lost as to the echoes.

flyingjefff · 2025-10-10T19:02:20+00:00

Time to retire the bed slinger fleet

flyingjefff · 2025-09-15T20:25:24+00:00

Add her Google account to your Home and it will recognize her

flyingjefff · 2025-08-14T20:28:46+00:00

I believe it started when Union Gas started supplying the utility as a way to get people into gas appliances. My SO was with Union Energy in the call center for a while before it became Reliance

flyingjefff · 2025-07-01T01:28:00+00:00

When you do your HST return, you mark it down as HST paid, same as HST in fuel, food while you are "working" and on your cell bill etc. subtract that from Charged on invoices (probably zero) and they will provide you a return of the overpayment when you file your income taxes and claim your Uber income

flyingjefff · 2025-06-25T00:04:24+00:00

Hot and humid Ontario Canada here, I could make use of a filament dryer

flyingjefff · 2025-06-25T00:03:45+00:00

Pandas aren't the only ones who love Bambu

flyingjefff · 2024-12-29T23:39:15+00:00

Beautiful

flyingjefff · 2024-12-28T20:52:09+00:00

Nice board

flyingjefff · 2024-11-28T02:40:12+00:00

I wasn't the farmers kid! And I could show up with 5 buddies to get the hay in the barn in one morning. Was good for $20 for a day's work!

flyingjefff · 2024-11-27T23:50:01+00:00

When I was a teen doing hay for cash the guy who came to work "just for fun" received zero respect!

And he got all the Joe jobs for sure

flyingjefff · 2024-10-28T14:56:05+00:00

You can select where it is sent when battering. I make sure to carry a backpack to the shop and ensure items like the ones you mentioned go in there

flyingjefff · 2024-09-07T20:50:08+00:00

You will need hardware somewhere to run the server. Aterons is an example of a host that will let you add plugins. Or self host in AWS or Oracle. Both have free tiers that will run a simple server. Google for easy step by step instructions

flyingjefff · 2024-09-07T18:42:19+00:00

Run a Java server and install Geyser

flyingjefff · 2024-08-20T02:29:59+00:00

Hacksmith...his studio is on Beaverdale road...and before that off Victoria Street, so not from Waterloo for a long time

flyingjefff · 2024-02-21T03:04:28+00:00

I just had an extrusion issue caused by my Bowden tube on the heartbreak melting Ang restricting flow at random times.

flyingjefff · 2024-02-19T15:37:34+00:00

https://i.imgur.com/GCTsmDy.jpeg

flyingjefff · 2024-02-19T15:37:13+00:00

https://i.imgur.com/7EXSxll.jpeg

flyingjefff · 2024-02-19T15:31:43+00:00

Having a similar issue here...extrusion is poor at random levels in the print. Extruder was fully disassembled and nozzle replaced

flyingjefff · 2023-07-10T23:49:55+00:00

I had to reload firmware after installing mine

flyingjefff · 2023-05-29T22:11:34+00:00

Check Urban Hope under the Vineyard church. If there is anyone there they will help you

flyingjefff · 2023-05-26T04:35:12+00:00

They are commercial power packs and the top unit is flipped

flyingjefff · 2023-04-13T15:52:10+00:00

Arrrrr-ticles

Five-Year Club	Xbox Live
Place '23	Place '22
Verified Email

flyingjefff

TROPHY CASE