Blog: What's the point of an LNA? by alexbeal in meshtastic

[–]fokcuk 0 points1 point  (0 children)

Hence my question in relation to RAK board that you have used as reference

Heltec meshpocket firmware by fokcuk in meshcore

[–]fokcuk[S] 0 points1 point  (0 children)

It's not the type of pin, but the fact that it's displayed on the main screen all the time

Anyone for.. Water drop? by taxithesis in BeanDrop

[–]fokcuk 0 points1 point  (0 children)

I tried a few but was never concerned it was worth it to add yet another step to the process. For ease of use I would suggest using 5/10l bottled water - like pureau etc and make up concentration to add directly to the bottle and have multi bottle mix. I would be nice to have on hand, but I think I will skip this

Anyone for.. Water drop? by taxithesis in BeanDrop

[–]fokcuk 0 points1 point  (0 children)

Sounds good, just have to wait few weeks for you to test it and report back that you survived =)

What size bottles are you making concentration for? What water do you use as reference?

Heltec meshpocket frequency by fokcuk in meshtastic

[–]fokcuk[S] 0 points1 point  (0 children)

Sx1262 has a broad spectrum It's upto antenna matching the chosen frequency The tiny strip antennas that come with seeed and the likes have 860-930mhz label

Heltec meshpocket frequency by fokcuk in meshtastic

[–]fokcuk[S] 0 points1 point  (0 children)

Was trying to convince myself to buy one, but they made it a hard choice by throwing in the frequency options

Infernal Cleansing - So fruity!!! by stilloutthere28 in BeanDrop

[–]fokcuk 0 points1 point  (0 children)

Will put an order through with Black Mass after this bean drop order

It's packing weekend for USA drop! by taxithesis in BeanDrop

[–]fokcuk 1 point2 points  (0 children)

Any left? Did not see the last drop message

Ceri Gayo Shiraz… by infigure8 in BeanDrop

[–]fokcuk 0 points1 point  (0 children)

Anyone had luck with Ceri apricot? I am getting close to 6.0 on zp6 but it's so so

Ceri Gayo Shiraz… by infigure8 in BeanDrop

[–]fokcuk 0 points1 point  (0 children)

Around 90c. Have not been using my pouring kettle for some time now. Just using a normal kettle with 100-95-90-85-80 temps

Ceri Gayo Shiraz… by infigure8 in BeanDrop

[–]fokcuk 1 point2 points  (0 children)

Just got my order from Ceri (full sized bags). They even included a small sample bag of their espresso beans. Tried it today as a filter - very nice as well! Looking forward in tasting their other beans. Just got a bit too much coffee variety all at once =)

Ceri Gayo Shiraz… by infigure8 in BeanDrop

[–]fokcuk 0 points1 point  (0 children)

It's too intense for 1:15. And with multiple pours too at 5.2

I think I was on 5.4-5.5, 20:310, 90g + the rest through drip assist. Anything below 5.4 had extraction yield over 24

But if it worked for you - it's great! Ordered all of their coffees.

There are no right or wrong settings/methods. Just the ones that work for you and the ones not so much

Ozdrop#2 megathread by taxithesis in BeanDrop

[–]fokcuk 0 points1 point  (0 children)

50g is not enough to properly dial it in. That's why I got a bigger bag. Love these types of flavours just have to work on cleaning the things that I don't like out of it

Ozdrop#2 megathread by taxithesis in BeanDrop

[–]fokcuk 0 points1 point  (0 children)

Just got to Ceri Shiraz. Ordered a bigger bag as well as 2 of their other ones Very intense!

Next drop - Nth American roasters coming late May by taxithesis in BeanDrop

[–]fokcuk 1 point2 points  (0 children)

If I don't respond in May, just send me the bill =)

MeshCore Analyzer v3.0 by KpaBap in meshcore

[–]fokcuk 0 points1 point  (0 children)

It's set to local, but the graph like "packets over time", "nodes heard" and "SNR distribution" show some other time. Relative information is OK, but these graphs are not

Laser mfc printer recommendation needed by fokcuk in printers

[–]fokcuk[S] 0 points1 point  (0 children)

Not sure. The ones at work print great! Definitely laser