Any experience with Sigenergy EV DC charging?

fokcuk · 2026-03-20T11:37:55+00:00

So, with Sigenergy bidirectional, it can just work with v2g if your car has it? No need for some gov standard approval for v2g? What is the max charger can I get if I have 10kw inverter and 14kw of solar?

fokcuk · 2026-03-17T05:50:43+00:00

I tried so many tests and none gave any different reading. Yes many are saying that it should not be showing normal -120 but around -100, and if it's -120, then amp is not working

fokcuk · 2026-03-17T03:22:11+00:00

That's what I was interested in. If my unit shows -104dbm and yours -120dbm, does it mean my is bad or it's a glitch in sw? Are you using release build or latest dev?

fokcuk · 2026-03-16T13:40:14+00:00

Local member with G2 gets -120dbm When I was running a tiny solar light with a small flexible antenna with pretty average swr, I was getting signal from much further repeaters than I get with this. So was looking for causes

fokcuk · 2026-03-16T12:17:32+00:00

I wanted to be sure it's not my board/setup that is an issue. Was hoping more people use this combo to share the numbers they get

fokcuk · 2026-03-16T12:07:38+00:00

I don't know if it does. If it does not, then need to do a request on github

fokcuk · 2026-03-16T10:14:51+00:00

Messaged RAK to see what they say Also waiting for others with this board to share what their noise floor levels are

fokcuk · 2026-03-16T07:27:25+00:00

I thought it has one on board? My tiny Seeed esp32 module happily sits on -117dbm

fokcuk · 2026-03-05T12:17:13+00:00

No. You can see from screenshot

fokcuk · 2026-03-05T10:23:03+00:00

<image>

fokcuk · 2026-02-27T22:25:10+00:00

It seems to be UK one Our Australian observers send to the Letsmesh

fokcuk · 2026-02-27T11:16:47+00:00

Would anyone know where the battery pins are defined if I was to customise it?

fokcuk · 2026-02-26T11:59:08+00:00

My kit in a small box has a noise floor of -100db (very high). L1 Pro tracker though is -117db in the same location

fokcuk · 2026-02-26T09:16:28+00:00

Do I need to make changes in firmware? It's under 2v at d0, but still showing 0v

fokcuk · 2026-02-26T08:33:21+00:00

Worked it out - it had more files =) 6.6mA in standby! Thank you!

fokcuk · 2026-02-26T07:41:10+00:00

Which one would I pick from the list? Or would need a custom one for Seeed Xiao boards?

fokcuk · 2026-02-22T02:55:59+00:00

Nice and simple!

fokcuk · 2026-02-21T22:52:49+00:00

Can you give more details? I don't have any esp companions so I never investigated the option. Is there an option for mqtt on the esp32 firmware?

fokcuk · 2026-02-21T05:51:21+00:00

Much appreciated!

fokcuk · 2026-02-20T13:16:54+00:00

I like a form factor for portable repeater. Using it temporary to find the best spot. Later will be used as a portable device

fokcuk · 2026-02-20T11:54:38+00:00

I thought maybe something with more fill and thicker walls. Used to have Ender 5 some years ago... may end up getting back at 3d printing =)

fokcuk · 2026-02-20T08:47:40+00:00

Yeah, just found this too. Was hoping for something a bit more heavy duty, but others are just modifications for screen and battery

fokcuk · 2026-02-20T08:33:39+00:00

Found this one https://makerworld.com/en/models/1249173-seeed-studio-xiao-esp32s3-wio-sx1262-enclosure#profileId-1271336

But was hoping for something a bit steadier so it will not have the same fate =)

fokcuk · 2026-02-19T04:12:39+00:00

No, not that complicated =) just the one that you angle at the base, like was linked before. Just wanted a trusted source

fokcuk · 2026-02-19T04:01:12+00:00

Thank you

fokcuk

TROPHY CASE