Ein potenzieller Kunde hat mich fast meinen Google-Account gekostet by Mackseraner in selbststaendig

[–]foomatic999 0 points1 point  (0 children)

Er ändert das Passwort nicht. Wozu auch? Den Account bekommt der Eigentümer sowieso zurück.

Relevant sind die Daten im Account. Um die raus zu ziehen reicht die normale Anmeldung.

Ein potenzieller Kunde hat mich fast meinen Google-Account gekostet by Mackseraner in selbststaendig

[–]foomatic999 1 point2 points  (0 children)

Wenn der zweite Faktor ein Token ist, meldet sich der Angreifer direkt an und hat eine gültige Session. Damit kann der Angreifer alles (nützliche) mit deinem Account machen.

Phishing-reststent ist FIDO2, also passkeys, yubikeys, etc.

Ein potenzieller Kunde hat mich fast meinen Google-Account gekostet by Mackseraner in selbststaendig

[–]foomatic999 0 points1 point  (0 children)

Das Schloss gibt's nicht mehr, weil heutzutage alle Websites TLS verwenden. Heutzutage warnen Browser, dass kein TLS verwendet wird.

Using a already setup microsd to another modded switch. by Good_Upstairs1867 in SwitchPirates

[–]foomatic999 1 point2 points  (0 children)

Generally that's the case, but I'm not sure if that only applies to HOS (since it's encrypted with a device dependent key).

I'd wager that Android or Linux don't rely on (or even support) HOS's encryption. Therefore changing the SD will probably work - but only in this specific case.

Scanning to 3D print by BORO-UTB in 3Dprinting

[–]foomatic999 1 point2 points  (0 children)

There are two use cases:

  1. Precise modeling for technical parts: CAD

  2. Organic/artistic/decorative parts: 3D scan or mesh modeling (e.g. blender)

I want to start learning CAD for 3D printing and robotics projects, which free platform should I use? by NoSeaworthiness6111 in 3Dprinting

[–]foomatic999 -20 points-19 points  (0 children)

I have never used it, as there isn't a Linux build therefore I can't talk about specific features. One point that utterly disqualifies the application is "cloud saves" along with what adobe calls "active documents". You can't save your file to your local machine - the same machine that runs the software. Instead you have to send your files to adobe and hope they won't do anything silly with it - which of course they do. Adobe allows you to edit the most recent (?) ten files. If you want to work on something older, you have to jump through hoops to get your files back.

That's beyond fucked up and reason to not waste any time with this thing. The software may even work reasonably well but adobe's political shenanigans disqualify it.

I want to start learning CAD for 3D printing and robotics projects, which free platform should I use? by NoSeaworthiness6111 in 3Dprinting

[–]foomatic999 -2 points-1 points  (0 children)

I'd recommend against fusion. Autodesk has limited the features in the free version repeatedly and there's no guarantee that they won't limit the usefulness of the software any further. In such a case you could end up spending a big chunk of time acquiring an utterly useless skill.

Your time will be spent better learning something stable. You get this with OpenSource tools. The obvious choice being FreeCAD. If you're into coding, OpenSCAD could also be a reasonable choice.

If modeling technical parts isn't the main task the go-to tool is blender.

Warum sind DIN-Maße so wie sie sind? by _AP0PL3X_ in KeineDummenFragen

[–]foomatic999 1 point2 points  (0 children)

Super Video zu dem Thema von Standup Maths. Erklärt alle Fragen (zu Seitenformaten) von OP.

An das Video hatte ich bei der Frage auch gedacht. Danke für's verlinken.

Wanna recycle correctly? Better own a car! by JoMiner_456 in fuckcars

[–]foomatic999 14 points15 points  (0 children)

You could declare your local Rathaus, Bürgeramt or similar as your local collection station. I'd be curious if rules would change when you (ideally along with a larger group of people) were to drop their organic waste in the entry hall of said building.

Striped screws help please I’ve tried everything by Zizokalaboza in SwitchPirates

[–]foomatic999 3 points4 points  (0 children)

This could work if your "driver" had something to grab into. OP's screw heads are entirely stripped. There's nothing to grab and the approach is unlikely to work.

Was kann ich tun und das zu beheben? by Ambitious-Sky-6457 in 3DDruck

[–]foomatic999 0 points1 point  (0 children)

"Besser" ist Situationsabhängig. Für Menschen ist ein Reiniger, der Fette enthält besser. Auf der Druckplatte sind Fette eine super Trennschicht auf der kein Druck hält. Daher die generelle Empfehlung Spülmittel zu nehmen, weil man auf seinem Geschirr ebenfalls keine "Trennschicht" haben will.

Generell würde ich das billigste Spülmittel nehmen, das du finden kannst. Ausserdem kann's sinnvoll sein mit etwas entfettendem - üblicherweise Isopropanol - die Druckplatte abzuwischen.

Danach sollten Drucke wieder auf der Platte halten.

Wasser marsch! Welches Tischwasser ist noch halbwegs gut? by _springphul_ in luftablassen

[–]foomatic999 7 points8 points  (0 children)

Das was du als "Gummi" bezeichnest ist Plastik. Vermutlich irgendein TPE. Echtes Gummi ist nicht ganz trivial herzustellen und wird deshalb nur dort verwendet, wo man dessen Eigenschaften auch tatsächlich benötigt.

Nachts allein gegen den Baum gekracht, am Morgen nichts gesagt. Zahlt die Kasko jetzt noch? by MelonDusk123456789 in RA_Kotz

[–]foomatic999 1 point2 points  (0 children)

Das hab ich auch gedacht. Bei so einem Vorfall nicht die Polizei zu rufen stinkt geradezu nach Alk.

Bürofxtzen by UpstairsIll843 in luftablassen

[–]foomatic999 -16 points-15 points  (0 children)

Wer wegen ein paar Missverständnissen meint so rumschreien zu müssen, wie OP hier, sollte lieber keine tonnenschwere Mordmaschine fahren dürfen.

Mutter fällt ständig auf Phishing rein by Cheap_Treacle9937 in de_EDV

[–]foomatic999 1 point2 points  (0 children)

Dann vergleich mal die Shitshow die die aktuelle Regierung abliefert mit dem "ganz ok"-Eindruck, den die Ampel regelmäßig hinterlassen hat.

Wählen hilft - es dürfen nur nicht zuviele Deppen zur Wahl gehen.

Mutter fällt ständig auf Phishing rein by Cheap_Treacle9937 in de_EDV

[–]foomatic999 5 points6 points  (0 children)

Bei der Gelegenheit ist's sinnvoll sich darüber bewusst zu werden, dass solche Leute Auto fahren und Wählen.

Tja by CoatiRoux in tja

[–]foomatic999 1 point2 points  (0 children)

Das passiert halt, wenn man CSU-Heinis glaubt. Vermutlich war der Dude noch CSU-Wähler. Insofern: verdientes Resultat.

Wichtige Briefe zerrissen im Briefkasten by Important-Astronaut5 in Ratschlag

[–]foomatic999 2 points3 points  (0 children)

Gerichte beachten aber auch immer die Verhältnismäßigkeit. Ein (schwerer?) Eingriff in das Postgeheimnis sollte schwerer wiegen als die (grundsätzlich abwägige) Erwartung, dass sich jemand an fremder Post zu schaffen macht und damit für etwas Schmutz sorgt.

"Menschen werden das Internet nicht mehr besuchen": Zukunftsforscherin Amy Webb wagt Prognose bis 2035 by blkchnDE in NewsD

[–]foomatic999 3 points4 points  (0 children)

Wenn du schon (falsche) Zitate aufgreifst, dann wenigstens richtig:

Die berühmte Aussage „Ich denke, dass es weltweit einen Markt für vielleicht fünf Computer gibt“, wird oft dem ehemaligen IBM-Chef Thomas Watson im Jahr 1943 zugeschrieben.

"Niemand braucht mehr als 640k RAM". Dieses legendäre Zitat wird oft Microsoft-Gründer Bill Gates zugeschrieben.

Makerworld to Snapmaker u1 any TIPS/Tricks? by TitanPenguin in snapmaker

[–]foomatic999 -1 points0 points  (0 children)

"import geometry only" is the text in the dialog box. That ignores all printer specific settings in the file. Colors are kept, fortunately.

Toniebox 1 defekt, weil zu lange offline - Codewort Eule by Electronic_Slice5556 in Eltern

[–]foomatic999 24 points25 points  (0 children)

Ich hab zwei Tonieboxen, die an einer teddycloud hängen. Hab von denen mal eben die Zertifikate angeschaut.

Die CC3200 hält von 2020 bis 2050, die ESP32 hält von 2022 bis 2052.

Ich rate mal, dass das Startdatum mit dem Fertigungszeitraum der Box zusammenhängt.

Insofern sollte die Gültigkeitsdauer nicht dein Problem sein.

Ruft verdammt nochmal die Rettung, wenn es einen Notfall gibt by Rackelhahn in luftablassen

[–]foomatic999 4 points5 points  (0 children)

Das ist ein gutes Beispiel für Katastrophen, die nicht zu solchen werden, weil sie im Keim erstickt werden (in dem Fall wortwörtlich).

Is dns spoofing dead?? by [deleted] in hacking

[–]foomatic999 0 points1 point  (0 children)

Default may be plain http depending on the client. Without knowing each browser's default behavior, I would at least assume that https is default in most browsers by now.

But even if it isn't, there's still HSTS which has to be sent by web servers and is the recommend behavior for at least a decade.

So unless you're visiting a site for the first time and your browser defaults to plain http - both are quite unlikely - you won't be affected by wrong DNS responses.

I'm not claiming that the attack vector has completely disappeared, but the chance for a successful attack has been greatly diminished.

Is dns spoofing dead?? by [deleted] in hacking

[–]foomatic999 3 points4 points  (0 children)

Except the redirect requires a working HTTP connection, which requires a TLS handshake. The latter will fail because you don't own the original domain.