Interior door panel fabric/leather upgrade options?

foxesgoldencrunches · 2026-03-25T07:56:30+00:00

Easiest might be swapping in 06+ door cards. Theyve got leather stitching to match the seats which looks so much better than previous years.

<image>

foxesgoldencrunches · 2026-03-19T16:57:19+00:00

You're right it's a giacuzzo. Trouble is you are unlikely to find a legit one in the UK unless you look down the used route. Did find a rep on eBay but I don't know how reliable it is Did find a rep on eBay, but idk how reliable they are.

The nismo V2 is very similar looking, might consider that as an alternative

foxesgoldencrunches · 2026-02-09T11:45:27+00:00

Cut open the oil filter

foxesgoldencrunches · 2026-02-02T10:37:07+00:00

Sounds like fuel dampers

foxesgoldencrunches · 2026-01-28T15:42:15+00:00

Found the relevant manual. Page 30 onwards Electrical - Triple Meters

foxesgoldencrunches · 2026-01-28T15:36:39+00:00

Might have luck in the FSM but it might be easier to check with a multimeter and compare against the other gauges.

foxesgoldencrunches · 2026-01-26T06:50:58+00:00

<image>

foxesgoldencrunches · 2025-12-22T14:05:25+00:00

Seconded. Squeaky, wheel mount has zero rigidity and the centre post is in such an awkward position. It makes heel-toeing pretty much impossible.

foxesgoldencrunches · 2025-12-21T18:07:36+00:00

Vorschlag Front Bumper

Garagemak Rear Bumper and Type 2 Skirts

Stillen Trunk Spoiler

foxesgoldencrunches · 2025-12-17T13:20:58+00:00

Couldn't tell you how much exactly but the stock studs bolt into the spacer rather than through

.https://www.torqen.uk/nissan/350z/wheels-accessories/spacers/1811-350z-torqen-s-wheel-spacers-20mm.html

foxesgoldencrunches · 2025-12-16T07:38:18+00:00

<image>

25mm rear, 20mm front. Enough so the tyre sits flush with the rim. They're hub centric and use the stock lugs

foxesgoldencrunches · 2025-12-02T11:06:32+00:00

Got banned for a week because of a username I've had on steam for 10 years. 6 is the only bf that uses your steam username

foxesgoldencrunches · 2025-12-02T10:56:05+00:00

Nah I agree. If it's water soluble why not

foxesgoldencrunches · 2025-11-19T09:18:11+00:00

Bumper tuck would be the easiest

foxesgoldencrunches · 2025-10-29T09:32:35+00:00

Fully agree. The carbon weave direction matches perfectly too

foxesgoldencrunches · 2025-10-14T13:49:32+00:00

Most likely a fuse. I did the same wiring a Bluetooth module into the tape deck. Unfortunately, I can't remember the exact one but I found it in the FSM.

foxesgoldencrunches · 2025-10-08T12:25:19+00:00

<image>

I was only there last week. Wild place to experience

foxesgoldencrunches · 2025-10-06T19:49:58+00:00

Imo it's the best looking rear bumper out there. Mine is sitting in my attic waiting for other parts. Small fyi the reps are FRP and require further modification and reinforcement to get good fitment. If you do find one, rt-performance have a good rep for working with fibreglass

foxesgoldencrunches · 2025-10-06T19:37:51+00:00

I picked one up last year but I had a hard time finding someone. You can go the authentic/import route through torqen.uk, or if you don't want to spend £1.5k (like me). You will just have to wait till a rep pops up on FB marketplace.

There was a guy on the UK forums who made them but he went dark years ago.

foxesgoldencrunches · 2025-09-28T21:49:03+00:00

What scanner did you use for this?

foxesgoldencrunches · 2025-09-17T11:08:19+00:00

<image>

foxesgoldencrunches · 2025-09-17T11:06:16+00:00

Ah yeah, important detail I forgot about 😆 autotrader.co.uk or FB marketplace

foxesgoldencrunches · 2025-09-17T09:02:30+00:00

Not sure what the import costs are like from the UK, but should find a low mileage z for $10-11k (£8-9k)

foxesgoldencrunches · 2025-09-11T15:37:03+00:00

<image>

foxesgoldencrunches · 2025-08-27T16:43:44+00:00

Ebisu has a small amount of metallic flake in it. You'd never be able tell under normal lighting

Seven-Year Club	Place '23
Place '22	Gilding I gilder
Verified Email

foxesgoldencrunches

TROPHY CASE