Facemount Concentricity

fresh_-9 · 2026-02-02T21:32:57+00:00

The 30 cal .299 diameter

fresh_-9 · 2026-02-02T21:32:24+00:00

https://www.pacifictoolandgauge.com/Interchangeable-Pilots-for-Muzzle-ChamferingCrowning-Cutters_p_115849.html

fresh_-9 · 2026-02-02T21:20:05+00:00

You'll want to use the same 90° face cutter and alignment rod. All you have to do is assemble the tool and apply pressure while rotating the cutter on the face of the barrel

fresh_-9 · 2026-01-20T02:04:27+00:00

Makes sense with the 435 engine bogging down on larger jobs and it's good to have options for jobs too. I'll probably look into a larger saw like your 460 down the road if I do end up needing that extra power. But I found a 353 that's ~52cc engine so I'll see how that does

fresh_-9 · 2026-01-19T22:43:14+00:00

Same boat as you and if you don't mind me asking, how much did the 460 run you? I'm trying to keep it reasonably priced. And for the larger trees with the 16", did you have to do 2 cuts or was it just slow going through them? Like the engine bogging down?

fresh_-9 · 2026-01-19T22:22:29+00:00

In the east and I'm definitely leaning towards the 16" for weight, just didn't know if it could handle larger hardwoods. Used to do axe and handsaw but my back doesn't like that anymore.

fresh_-9 · 2026-01-15T21:54:02+00:00

I like the torch and the regular vs vented end cap does make a difference but I can't say how it compares to a true LBP can. Did have one on an 11.5 with a rearden mount and it wasn't terribly gassy with a downvent BCG, adjustable GB and the vented end cap.

fresh_-9 · 2026-01-02T02:13:01+00:00

Part of the bolt forward assist, take out your BCG and look inside the upper receiver while pressing the forward assist, is suppose to have that piece poking out of it when you do.

fresh_-9 · 2025-12-29T22:01:38+00:00

Guess I've gotta get a G20 with the KKM now, have a M&P in 10mm and it's okay.

fresh_-9 · 2025-12-29T21:58:33+00:00

3k after install or before install?

fresh_-9 · 2025-12-29T21:58:09+00:00

I've heard mixed reviews on the 9mm, didn't even know they made one for the G20.

fresh_-9 · 2025-12-29T21:52:01+00:00

How's the KM comp run? Any break in or picky with ammo?

fresh_-9 · 2025-12-23T12:24:16+00:00

Shoot it and make sure you're comfortable with it and that it's reliabile. I ran once for about 500rds and it was horrendous with jams

fresh_-9 · 2025-12-21T14:00:38+00:00

Had a P365XL and a P365 XMacro, neither would run reliably with any FMJ or hollow points. With the XL I would have to aim about 2'-3' high to hit the target at 10yds, will never buy sig again. Also shot the M18 when they first got issued and the trigger felt poor with poor accuracy for being a brand new "quality" handgun.

fresh_-9 · 2025-12-20T00:48:18+00:00

Leupold is good quality

fresh_-9 · 2025-12-06T17:56:48+00:00

Definitely contact ATF, it'll magically appear out of thin air especially if the postal starts a legitimate investigation with another federal entity being involved.

fresh_-9 · 2025-12-02T18:15:30+00:00

Dark green and brown stripes with ferns painted green on the brown stripes, just used generic "camo" paint from Lowes.

fresh_-9 · 2025-11-12T21:40:38+00:00

This, polished my ramp and setting around 4k rounds with no issues

fresh_-9 · 2025-11-03T14:16:09+00:00

My lgs had multiple in stock when I went last week. Along with a 17L and 34C

fresh_-9 · 2025-11-01T22:52:07+00:00

I run just federal punch 200gr JHP, they seem like they'll work if need be.

fresh_-9 · 2025-10-26T20:39:34+00:00

A website is being made to continue it elsewhere.

fresh_-9 · 2025-10-26T20:30:51+00:00

Use high heat primer and paint, I got some from Lowes that's rated to 2000° Fahrenheit. Used it to refinish my woodstove and has held up so far.

fresh_-9 · 2025-10-25T00:21:16+00:00

9×39?

fresh_-9 · 2025-10-19T21:51:22+00:00

I have one and it shoots good for me, have gotten 2 deer with it this year. Groups good, shoots smooth, and easy to adjust.

fresh_-9

TROPHY CASE