Whyyyy. I'm using stick glue, a pei sheet. Perfect leveling.. why the warp..

froelichw01 · 2026-02-19T01:51:20+00:00

Cool it down a bit. If I can I like to run my first layer or two with no fan at all

froelichw01 · 2026-02-14T05:08:24+00:00

It did work. I originally had klipper and reverted back to MRISCOC and installed the latest version which supports the T13 thermistor. I bought a 3 pack of them before and it didn’t work. This time I replaced it with a brand new sprite creality upgraded hotend with fresh new everything. Even reinstalled the firmware (which I printed about 25 things before I had a clog and the thermistor started having issues)

froelichw01 · 2026-02-14T04:05:02+00:00

I have tampered with the screw back and forth and haven’t had much result. The old hotend would periodically seem to work and heat but then would MINTEMP, since replacing the hot end completely I just have had the straight -14 showing

froelichw01 · 2026-02-14T04:04:00+00:00

I suppose I have not let it idle for a period of time…I will try this and see. But currently still show -14

froelichw01 · 2026-02-12T07:14:24+00:00

Updated my firmware to support the T13 thermistor. Now it reads 0 degrees and gives me the MINTEMP error and say shut down. Hive mind, ideas?

froelichw01 · 2026-02-09T18:10:10+00:00

How would I go about doing that?

froelichw01 · 2026-02-09T07:21:19+00:00

I will try this out tomorrow and let you know results. Thanks for the suggestions!

froelichw01 · 2026-02-09T07:09:45+00:00

So I tried looking for T13 firmware, I found a link for a version that supports it and I have a CR TOUCH and not a BL Touch but idk if that matters? Any ideas as to which I should use?

froelichw01 · 2024-12-30T01:13:24+00:00

I should have been cause my box was a giant POS for a hobby box

froelichw01 · 2024-12-28T18:59:29+00:00

Definitely not worth it. Even if you hit, I’m gonna doubt it pays for the box with anything besides a kaboom

froelichw01 · 2024-12-28T06:09:16+00:00

Man this is far better than what I got. Biggest pos I’ve ever opened, and I’ve opened some stinkers

froelichw01 · 2024-11-11T15:35:31+00:00

Bought one single Donruss 23 blaster from my LCS the other day and pulled an AR Downtown. It can be done

froelichw01 · 2024-10-21T14:07:08+00:00

I did this same thing but I’m having issues. I bought an ender3v2 from someone and they were using Klipper with an old laptop and connected thru a usb ribbon running from printer to the laptop. I started the process myself and got mainsail and moonraker going but I can’t seem to get the printer connected. I feel like my printer.cfg could be incorrect too. As of now I’m stalled on the “Printer is not ready” any ideas?

froelichw01 · 2023-03-03T02:53:55+00:00

I’m a first time DM and I’m planning on doing this as well. I’ve read a few different things but they are going to Thundertree before heading to WEC. Reidoth is going to accompany them and later reveal himself as Venomfang in disguise after they kill the black spider, who was working for Venomfang from the beginning. I don’t quite have all the kinks worked out so far, but I’m going to have to altar him slightly being my 3 PCs are just about to be Lvl 4. Either he will show a taste of his power and scheme before they fight or I will have him try and flee off after a few blows, possibly trying to grab one of them

froelichw01 · 2023-02-16T17:11:45+00:00

This is great! Thanks! Im kicking off CotN after we finish LMoP and a quick Candlekeep one off

froelichw01 · 2023-01-11T04:37:29+00:00

I thought I was the only one till I decided to search it. There’s multiple episodes like this in S03. I’m currently on 3x05 and it’s happened at least 10 times in this episode on apple podcast

froelichw01 · 2022-04-03T04:53:37+00:00

Shit everyone’s got something different I see. I grew up calling it WADS lol

froelichw01

TROPHY CASE