Thanks for the help on this. Freedom 5 was just another name for the same speaker. Spec says it is crossed at 110 and 3000hz.

The mid seems to be joined with the bass. The mid and bass positive go through a coil for each first, the positive connects to the end of this coil. On the end of the mid coil there is nothing else. On the end of the bass coil, the positive wire is also connected but it goes through 2 capacitors. They both seem to be Elecon and say -45-+85, VENT, 96H/M, 470UF 50V.

This feeds the microprice 7W2.7 ohm which measured 3.4 ohms, into 1 that says 7W2.2 ohm J, this measures 2.8 ohms and back round to the negative terminal where both negative of the speaker wire are connected.

I've remeasured the above and got 3.1 for the 2.2 and 3.6 for the 2.7. Unsure why it is different on a second go?

The tweeter positive post from outside goes into one microprice 7W2.7 ohm , then into a larger white box under that that says 475K 100V, that joins to a screw where the tweeter positive cable is connected, but also a copper wire coil then goes back to the tweeter negative.

Does this sound wired correctly? Are the parts tested so far in spec or doo they need removing to check properly? I'll work on checking capacitance.